Drumroll…..And the winner for the sixth set was Jim’s Higgins Build with an overwhelming 45% of the votes (Kevin’s AR9 build came in second with 27% of the votes). The randomly picked winning voter was Zach C. I think Jim’s build won because of the [Read More…]
We just saw our 24th installment of Build of the Week and we have plenty more submissions to go. As we mentioned, we have a plan in mind for some interactivity with this series to keep it a little more fun and lively. As is our process, after every four posted Builds, [Read More…]
The 24th Installment of Build of the Week was contributed by Jim. So basically this is the Craftsman Tools of shotguns… Pretty interesting collector’s piece (with a little bit of the history), and even more interesting that Jim modded it (there is always [Read More…]
The 23rd Installment of Build of the Week was contributed by Kevin. I really like the look of that hand guard. If you all can’t tell by now, I really set this series up to get good ideas for the stuff I want to do. Pete finally convinced me to em-brace PCC [Read More…]
The 22nd Installment of Build of the Week was contributed by Matt. Thank goodness it is not another FDE gun. Honestly the hottest thing I like about this build is the Rail-Rap (see what I did there?). How did I not know about this product. You’d think by this point [Read More…]
Drumroll…..And the winner for the second set was Michael’s Predator Hunting AR with just over 43% of the votes (Jodie’s Rebel Scum came in second with Noshpatu and Valorius at a dead tie for 3rd). The randomly picked winning voter was Todd W. I would [Read More…]
The 21st Installment of Build of the Week was contributed by JG. I believe this is the first build that has been submitted where one of the components was actually 3-D printed by the builder. While everything else was off the shelf as JG mentions it is not bad [Read More…]
Last week saw our 20th installment of Build of the Week and we have plenty more submissions to go. As we mentioned, we have a plan in mind for some interactivity with this series to keep it a little more fun and lively. As is our process, after every four posted [Read More…]
The 20th Installment of Build of the Week was contributed by Jodie P. This build is pretty straightforward. It has a decent optic, a Faxon barrel, and Strike should be happy to see a build with one of their stocks. What makes this build stand out is the paint scheme [Read More…]
The 19th Installment of Build of the Week was contributed by Valorius. I only called it “Glorious” because it was kind of poetic. Overall a pretty clean build, and good integration of the Cobalt Linear Compensator—it looks good here. Valorius has been a long [Read More…]
Drumroll…..And the winner for the second set was the 6.5 Grendel Pistol Build by DJ with 32% of the votes (I’ve noticed that the votes are getting much closer; I’m assuming because the individual builds appeal to some segments of all of you. It could [Read More…]
The 18th Installment of Build of the Week was contributed by Noshpatu. I think this submission beat the whole “Space Force” announcement a few months ago so Noshpatu may have something. That said, anything with the Hera CQR is going to look science-fictiony. The [Read More…]
The 17th Installment of Build of the Week was contributed by Michael G. This is one of the most complete submissions to date and includes prices. Keep the submissions coming in! We are publishing them in the order in which they were received (with the exception of a [Read More…]
Two weeks ago (my apologies for not getting this out last week) we saw our sixteenth installment of Build of the Week and we have plenty more submissions to go. As we mentioned, we have a plan in mind for some interactivity with this series to keep it a little more [Read More…]
The sixteenth Installment of Build of the Week was contributed by BKKSW. I have just recently embraced the 300 BLK (after constant hounding and derision from Pete). I went with a very much “off-the-shelf” SIG MCX Rattler PSB, and now that I am part of the [Read More…]
The fifteenth Installment of Build of the Week was contributed by DJ. I personally have no experience with 6.5 Grendel. One of the things I am enjoying about this series is seeing the variety of not only modifications but platforms. DJ has provided one of the more [Read More…]
The fourteenth Installment of Build of the Week was contributed by M Bear. Any mention of “Project Nemesis” immediately brings up visions of Milla Jojovich and a genetically engineered zombie apocalypse. This build would probably serve well in putting down [Read More…]
The thirteenth Installment of Build of the Week was contributed by Steve. This is Steve’s FINAL submission. Submit early and often and you too can showcase your works. Honestly I like most everything on this build–it is pretty clean and has a nice [Read More…]
Drumroll…..And the winner for the second set was William C with his AR “In All It’s Glory” build. The randomly picked winning voter was R C. William C will receive a gift card to a retailer where he can acquire more parts for his next build (and be entered [Read More…]
Last week saw our twelfth installment of Build of the Week and we have plenty more submissions to go. As we mentioned, we have a plan in mind for some interactivity with this series to keep it a little more fun and lively. As is our process, after every four posted [Read More…]
The twelfth Installment of Build of the Week was contributed by Woodrow. I have personally not had any experience with Aero Precision components, but I have generally heard good things. The Faxon barrel is a solid choice–can’t really go wrong there. That [Read More…]
The tenth Installment of Build of the Week was contributed by Hoplopfheil. So long as you are not clearing a room with a teammate, loud and massive muzzle flashes are fun. I am definitely becoming more and more a fan of AR/AK “pistols” as time goes on, [Read More…]
The ninth Installment of Build of the Week was contributed by William C. Organized desk award (with sadly empty decanter) goes too…. I know Cerakote is a “thing”, but I still have a special place in my heart for rattle can paint jobs. This rifle [Read More…]
There was a little confusion last week since we rolled the results in with the new BOTW. We listened and split the posts. Drumroll…..And the winner for the second set was Rick’s Rifle Dynamics AK Build with 157 votes (Steve’s Mk 24 Combat Assault [Read More…]
Last week saw our eighth installment of Build of the Week and we have plenty more submissions to go. As we mentioned, we have a plan in mind for some interactivity with this series to keep it a little more fun and lively. After every four posted Builds, we are going [Read More…]
The eighth Installment of Build of the Week was contributed by Johnny. I am a personal fan of the M&P Shield. I carry one on duty (original; not the 2.0) as my backup gun and honestly find myself carrying it as my CCW during the summer months. These mods all sound [Read More…]
The seventh Installment of Build of the Week was contributed by Rick. This is actually a full repost of his write up that he originally submitted on ar15.com in May of 2017. In any case, keep the submissions coming in! We are publishing them in the order in which [Read More…]
Sixth Installment of Build of the Week was contributed by John D. He did not submit a ton of details for this build–we are just including the information he submitted. Ask away in the comments for John to discuss more about his build–Steve (last week) [Read More…]
Drumroll…..And the winner was Tony R with his BOTW: 300BLK PDW. The randomly picked winner voter was Jordan W. Tony will receive a gift card to Brownells and Jordan will get a small amount of swag. It pays to play… 😉 Fifth Installment of Build of [Read More…]