Odin Works offers a full suite of complete firearms, parts, and accessories primarily for the AR platform. From AR-15s, AR-10s, AR-9s, suppressors, and more, this Boise, Idaho-based shop pretty much does it all. Previously, their AR-10 complete upper receiver lineup has [Read More…]
Released a little less than a month ago, at SHOT week, is the new Enhanced Series 9mm Bolt Carrier Group by ODIN Works. I think it would be more correct to call this part a bolt rather than a bolt carrier group because there is no bolt carrier per se, however, [Read More…]
Back in November of 2020, ODIN Works introduced their first complete AR-15 pattern rifle called Odin Tactical Rifle or OTR-15. Recently the company announced the release of the second rifle in the Odin Tactical Rifle line, the OTR-15 6.5 Grendel. As its name implies, [Read More…]
ODIN Works has introduced a new AR-15 charging handle called Diverge. According to the company, the overall shape, extended latch and the material this charging handle is machined from (7075 aluminum), increase its grip area by 500% and make it 65% wider and 140% [Read More…]
ODIN Works is well known for making all kinds of firearm parts and accessories with a primary focus on the AR-15 platform. However, they never had a complete AR-pattern rifle in their catalog. Well, they’ve just fixed that by introducing the ODIN Tactical Rifle [Read More…]
ODIN Works Enduro suppressor, which was first introduced at SHOT Show 2020, is now available for purchase. This new can has a modular tubeless design allowing to change its overall length by adding or removing baffle sections. It is also a multi-caliber suppressor [Read More…]
Introduced at SHOT Show 2020, the new ODIN Works NAV 22 rimfire suppressor is now available for purchase. This suppressor has a tubeless modular design allowing to change the overall length by removing or adding baffles. First, let’s see how ODIN Works describe [Read More…]
Introduced at SHOT Show 2019, the Odin Works CQ-S (Close Quarter Stock) is now available for purchase. This AR-15 stock system has a micro buffer and flat wire spring which allow having a much shorter buffer tube that extends behind the lower receiver by only five [Read More…]
ODIN Works has introduced a new series of lightweight AR-15 handguards called the RUNE. These new M-LOK handguards are currently available in 12.4″ and 15.2″ length options. Here is how ODIN Works describes this new product line: The RUNE is the latest [Read More…]
Introduced at SHOT Show 2019, ODIN Works adjustable AR buffers are now available for purchase. These buffers come with a set of weights and allow to relatively quickly and easily adjust the overall weight by installing a proper combination of steel, aluminum or tungsten [Read More…]
ODIN Works has introduced two new versions of their adjustable gas block designed for barrels that have .875″ and .936″ diameter at the gas block mounting portion. The most common AR-15 gas block diameter is the .750″. However, some barrels with thick [Read More…]
Odin Works makes some of the better AR15 accessories out on the market. Their extended AR15 mag release has put them on the map as well as their extended 9mm PCC mag release. This year they have branched out a bit and have made scope rings. They will come in either 30mm [Read More…]
Below you will find details of the different LWRC International (LWRC or LWRCI used as short) rifles used by the Swedish Military and Police, as well as accessories and optics. Behind this article lies literally months of scouting from several people and sources and we [Read More…]
Just in case you did not have enough tactical romance in your life, Odin Works has released the Tactical Candle Holder. Made out of aluminum, the TCH is complete with QD sling swivel studs and an accessory rail to mount your candle-light red dot. “Features” [Read More…]
Battle Rifles Company has released a new AR15 called the BR4 Odin, which features none other then a ODIN Works 12.5″ Keymod rail, the same rail that I recently reviewed here at TFB. Makers of high quality, yet affordable AR’s I would expect nothing more [Read More…]
As we all know very well, KeyMod is here to stay. Now an open source standard, just about every company out there is making a KeyMod system. While all of them are basically the same in terms of function, what tends to set different companies apart is the little [Read More…]
A new mag release with a hint of color. Made in the USA by Odin Works, the XMR Extended Mag Release is machined from 6061 billet aluminum and anodized to the chosen color. Odin Works touts their mag release: The XMR is ergonomically designed and contoured for superior [Read More…]