Silent Steel Safe-Guard Suppressor Heat Shield

Eric B
by Eric B
Silent Steel Safe-Guard

The Silent Steel (Finland) Safe-Guard is a new heat shield designed for their Silent Steel Streamer series of suppressors. It acts as a protective barrier against burns and serves as a thermal insulator, reducing visible mirage effects. By creating an air gap between the suppressor and the shield, heat transfer is minimized. The design facilitates airflow for cooling during shooting, ensuring the suppressor and shield remain at safe temperatures. According to the manufacturer, the Safe-Guard is highly durable and can withstand extreme temperatures, making it a reliable accessory for users seeking enhanced safety and performance.

Silent Steel @ TFB:

Check below for some interesting temperature measurements as they work themselves through 4 magazines.

Here is the news in full:

Silent Steel Safe-Guard is a heat shield for the Silent Steel Streamer family of suppressors.

The heat shield will protect the user and gear against burns and it is a thermal insulator and signature reduction device that mitigates negative visible mirage effects.

The air gap between the carbon fiber outer hull and the suppressor will prevent heat from transferring from the suppressor to the heat shield. When shooting, the gun blast pressure will suck air from the venting holes at the back of the cover. The design allows high volumes of cooling airflow across the can which will cool down the suppressor and heat shield. Low thermal transfer materials will not get so hot that the Safe-Guard would burn gear or melt gloves when detaching the hot suppressor from the barrel.

The Safe-Guard is very light but still impact and heat resistant, capable of withstanding suppressor temperatures exceeding 600°C for short periods of time.

Technical Specifications:

Diameter: 55mm
Weight: Micro 115g, Compact 125g, Streamer 165g
Material: carbon fibre and steel.
Surface treatment: Cerakote and nitriding

Specifications:

Measured temperatures:

AR15 16″barrel. Compact Flow Streamer. Sellier & Bellot 62gr. Outside temperature 0°C

Starting temperature
Suppressor: 10°C
Safe-Guard: 7°C

1st magazine (30 rounds, 3 shot/sec)
Suppressor: 120°C
Safe-Guard: 10°C

2nd magazine (30 rounds, 3 shot/sec)
Suppressor: 220°C
Safe-Guard: 30°C

3rd magazine (30 rounds, 3 shot/sec)
Suppressor: 400°C
Safe-Guard: 68°C

4th magazine (30 rounds, 3 shot/sec)
Suppressor: 520°C
Safe-Guard: 117°C

More info:

The Safe-Guard is compatible with all Quick Detach (QD) Streamer family suppressors (Streamer, Compact Streamer and Micro Streamer).

The Safe-Guard is attached to suppressor with locking screws.
Note: The locking screws will leave a round mark on cerakote surface.

Colors available:

Armor Black Cerakote
Magpul OD Green Cerakote
Magpul FDE Cerakote

Safe-Guard is delivered with a storage pouch. The pouch is made from non melting materials and hot suppressor with Safe-Guard can be stored in the pouch.

We do not have any information about the price at this point.

Here’s a direct link if you want more information: https://www.silentsteel.fi/products/safe-guard/

Eric B
Eric B

Ex-Arctic Ranger. Competitive practical shooter and hunter with a European focus. Always ready to increase my collection of modern semi-automatics, optics, thermals and suppressors. TCCC Certified. Occasionaly seen in a 6x6 Bug Out Vehicle, always with a big smile.

More by Eric B

Comments
Join the conversation
 8 comments
  • Max Mller Max Mller on May 08, 2024

    Still a bit heavy and not sure why it can't have ventilation holes.
    I'm sure i can make a suppressor guard out of chicken wire that's not just 90% lighter but also 99% cheaper.

    • See 5 previous
    • Entelodon Entelodon on May 09, 2024

      @mig1nc I think you missed the point of the device. It's a heat shield that prevents mirage.

  • Matthew Mcdonald Matthew Mcdonald on May 09, 2024

    So, same as Mod-Tac but you can only use it with their proprietary suppressors?

Next