The Firearm Blog

How frick'n awesome is this ...

Reminds me of the FG-42 ... only more awesome!

I have never seen a side magazine mounted .50 BMG upper for the AR-15 platform. Tactlite have outdone themselves!

The T-2 will also be available chamabered in .338 Laupa and .416 Barrett.

The price starts at $2,198 and preorders require a $500 deposit (refundable at anytime before shipping). It is expected to ship by Christmas.

[ Blogging is addictive ... I really need to take a break ]

[ I am pleased to present the first post in the series of guest posts that will run for the next couple of weeks. This post was written by Aaron Spuler. ]

I’d been looking at the local gun shops over the past few months, but they only have so much selection. The Saxet gun show is in Austin, Texas every third weekend of the month. Hadn’t been to a gun show in a while, and knew that it would be a good opportunity to not only see but get some hands-on time with a variety of different pistols. Specifically, I was looking for a reliable, compact every day carry pistol. I’d been planning on carrying my Bersa Thunder 380, but it is just a little heavy and large for daily carry. There is a variant of the Bersa Thunder 380 intended for concealed carry, but I just own the standard version. So I put together a list of different pistols to take a look at and did some online research before going to the show.

Kel-Tec PF-9

I was a little disappointed as the selection was not as varied as I’d hoped – predominantly Glocks and Sigs, with small amounts of others thrown in the mix. I did, however manage to get to handle a Kel-Tec PF-9. That was at the top of my list of pistols to check out at the show. The three vendors selling new Kel-Tec PF-9’s were selling them for anywhere from $15 - $65 over MSRP. In other words: not good. I’m glad I did a second look at one table, because there was a PF-9 on the table that I missed the first time around for under MSRP. Purchased the brand new Kel-Tec PF-9 for $302.85, including tax.

After the show I purchased an extra magazine, a Hogue Handall Jr. grip sleeve, and some Hornady Critical Defense 115 grain JHP ammunition to go along with the pistol. I already had a Desantis Nemesis holster, originally purchased for the Bersa Thunder 380, that the PF-9 fits into nicely.

I took the PF-9 out to the range on Saturday and put 130 rounds through it at a target posted 30 feet away. I tested a combination of 115 grain PMC FMJ and Winchester JHP. Both the FMJ and JHP ammunition cycled and fired flawlessly – I experienced zero errors (failure to feed, failure to fire, failure to eject).

The PF-9 does not possess an external safety, and relies instead on a double-action only (DAO) trigger. The trigger pull distance is slightly long, but the pressure is spaced evenly throughout, rather than a heavy jump right before the hammer is released. The trigger pull weighs in at a reasonable 6 pounds of pressure, similar to that of a double action revolver.

Surprisingly, for such a lightweight gun, I did not notice any issues with the recoil, and neither did another shooter that put 8 rounds through the PF-9. Perceived recoil may be slightly more than a full size pistol, but at 15.5 oz (fully loaded), that is to be expected with this size of pistol. Recoil is considerably less than that of a Ruger LCP, which weighs in at 9.4 ounces and fires the smaller .380 ACP cartridges.

The sight picture is a traditional 3 dot system, and point of aim is very natural. I could close my eyes, bring the PF-9 up to aim, and open my eyes to find the sights very near their intended location.

I tended to take up the slack in the trigger to about 80% and then jerk the remaining 20% during the first magazine. Although I was able to maintain a good sight picture, jerking the trigger caused groupings to be in the 8 – 10 inch range. After correcting that issue by maintaining a steady pull on the trigger all the way through, I found that the PF-9 is capable of more accuracy than I am. I was able to consistently get 8 round groupings that could be covered by the palm and fingers of one hand. The final 8 rounds fired for the day were in a grouping approximately 3 inches in diameter.

Once I have my license to carry (waiting on the state to finish processing my application) I'll be carrying this pistol with me everywhere I'm legally able to.

[ Errr ... that was a quick break! ]

Gun Holsters and Gear has info on the Fourth Generation Glock.

We all thought that the RTF2 Glock that come out this year was the 4th gen glock.

UPDATE: Gun Holsters and Gear takes a look at probable features of the next gen glock.

Hi ladies and gentlemen. You probably noticed the flurry of blog posts over the past few days - I have been trying to get most of my backlog published before my break from writing. I will resume writing on 11 November (Next month).

Don't worry, the blog will be updated everyday, Monday to Friday, with a guest blog post each day. Readers from around the world have contributed articles covering a wide range of topics and I am very excited to present them on the blog, giving you all a break from my poor spelling and bad grammar So check back daily.

I will not be gone anywhere. This break is just so that I can get through my work workload without feeling guilty about not posting enough articles.

When new firearms are launched or there is breaking news, I will take a break from the break and cover it on the blog. I may also publish one or two articles I have been working on. I have you covered for gun news!

I will still be here can be contacted via. email.

Please continue to email me interesting firearm related news and information. While I may not be able to publish it on the blog, I want to keep my finger on the pulse of the industry ... and I just plain enjoy reader about gun stuff

Kind regards,

Steve

PS. If you have not been visiting the website daily, and are not subscribed, you have probably missed blog posts that dropped off the homepage. Scroll down to the bottom of the homepage and click the "Next" link. It will take you to the previous posts that are not on the homepage.

PPS. I am a bit behind on replying to emails ... please bear with me will I sort out my inbox.

Ethan Dublin, a very innovative 18 year old college freshmen, has developed an interesting charging system for AK-type rifles.

Ratchet Charging System

The Ratchet Charging System comes with a replacement gas tube and a sleeve that bolts onto the end of the gas piston. The design offers quite a few advantages over the standard charging handle. Being on the left hand side it is faster to manipulate when doing magazine reloads (if you are right handed), it can be used as a manual bolt hold open and, if the standard charging handle is removed, the Ratchet system can cycle the bolt and chamber a round with the safety engaged. This video demonstrates it in action ...

I asked Ethan if the cut out gas tube venting gas would affect the operation of the rifle. He said it would not.

The only major disadvantages that I can see is that the charging handle must be unscrewed when field stripping and that leaving the bolt locked back in the field could allow dirt to get into the gas block.

Bolt locked back.

The installation is gunsmith free and it is compatible with ...

• Romanian AK-47 (7.62x39)
• Saiga (5.56)
• Polish Under folder (7.62x39)
• Bulgarian AK-74 (5.45)
• Egyptian Maadi (7.62x39)
• Russian Milled AK-47 (7.62x39)
• ROB. Arms VEPR (7.62x39)

I wish Ethan the best of luck with his endeavor and future engineering studies. Maybe we have our next Eugene Stoner here?

LAGE Manufacturing, LLC. will soon be selling a .22 conversion kit that they have developed for the SWD Cobray M-10 and M-11 submachine guns.

This design uses your existing upper receiver and cocking knob with a drop-in barrel insert, bolt assembly, magazine adapter and modified UZI .22 LR magazines. The magazine inserts in the pistol grip mag' housing just like the original 9mm magazine.

LAGE currently manufacture a range of slow-fire upper receivers for M-11, M-10/9 (a version for the M-11A1 is in development). These uppers slow the rate of fire from 1100 RPM to 600 RPM, making the gun much more controllable.

These guns are well known for eating through ammunition with their very fast rate of fire. The cost of these uppers are around $760.

Many thanks to Jeff for the information, photo and links.

Saved for future reference. I often make mistake identifying AK clones. Luckily I have y'all to correct me in short order!

Perfect for muzzle loader hunting season and living out your South Seas whaling fantasy Just $22,000 (shipping from Norway not included in price).

More about it at Snowflakes in Hell.

Truvelo, a South African company is best known internationally for manufacturing traffic lights, also makes firearms - notably the infamous NEOSTEAD Bullpup shotgun and the Raptor rifle.

Truvelo Raptor Rifle

I was very pleased to see that the Raptor has been given a makeover. The older stock made it look like a cheap toy rather than a real rifle.

The old style stock ... they need to update their website.

Truvelo claim the gun provides excellent controllability during full auto fire due to the recoil and bolt system. It also features is the ability to easily switch between 5.56mm NATO and 7.62x39mm.

A big thank you to Lusaka for the information and photo he provided.

Earlier this year Soroka, a New Zealand firm, unveiled their Soroka 07 rifle action. It based on the famous falling block Gibbs Farquharson action.

Internally it differs from other rifles that make use of the Farquharson action by its use of a in-line striker driven by a coil spring rather than a rotating hammer. This decrease lock time and allows repeated dry firing. Soroka says ...

Firstly it is 100% manufactured in New Zealand. Secondly, my action whilst looking like a later model Gibbs Farquharson is completely different inside. It uses a striker (firing pin) that is in-line with the bore that is powered by a chrome silicone coil spring. This gives extremely fast lock time and reliable ignition. The design also allows for dry firing which many single shot designs abhorr. Every single component in this action is either CNC'd or wire cut. All the major components- receiver, trigger plate, underlever, quarter rib are CNC'd from Boehler P 20 vaccuum re-melted billet bar stock, a couple of minor items, safety button and bar from 4140, the internal links and other components EDM wire cut from from 17-4 ph stainless ground plate. My machinists are are arguably the best 3d machinists in this part of the world. I can assure you it takes some doing to machine the compound curves found in this design. Ask anyone who knows.

This stunningly beautiful work of art comes at a price. The total price (inc. shipping overseas) is US$14,500!

Many thanks to Mehul for the link and info about the rifles.