We’re back at TriggrCon 2023, this time with Athlon Optics as they reveal their first ever Thermal Optic the new Cronus ATS Thermal system. Available in 3 objective/sensor size combinations, the Cronus ATS Thermal scope line starts pricing at around $2600 and comes loaded down with a ton of [Read More…]
Is it Friday Night Lights already? Lucky you! Last week we took a look at my Frankensteined hacked JIM LR which allows me to see farther than ever before with cooled thermal. We switch gears today and take a look at a Chinese copy of a PVS-14 by Lindu Optics. Their [Read More…]
If you have been following along with my Friday Night Lights series of articles, you will know I have been using cooled MWIR thermal to help spot long-range and even ELR shots at a mile and further away. Well, thanks to the recent August Blue Super Moon, I managed to [Read More…]
What a wonderful Friday night and you chose to spend your time reading this article. Thank you! Today we talk about our third thermal camo test of the Phantom Defence ghillie. We pit the Phantom Ghillie vs drone, specifically a thermal drone. How did it do? Well, you [Read More…]
Last June I wrote about my friends trying the 700-yard soda can challenge where we tried to hit a soda can 700 yards away with a .22LR. My friends were successful but we knew it was more luck than skill. We revisited the challenge and came to the same conclusion. So we [Read More…]
Welcome back. Are you thirsty for more Thermal Camo? Last week I started a 3-part review of the Phantom Defense Phantom Ghillie as part of my Thermal Camo series of Friday Night Lights. I resume my review in Phantom Ghillie Revisited and continue testing this legit [Read More…]
If you clicked on this article, then I hope you have been following along with my Thermal Camo series. With the help of my friends, I tested various materials to see if they could work as makeshift thermal camouflage. This time I was invited to test out actual thermal [Read More…]
You are back again? Just can’t stay away, can you? That is ok. We love night vision here and if you love night vision like we do, then you are welcome. Last week we looked at the Thales Sophie a cooled LWIR thermal biocular. Well, today we look at another night [Read More…]
Aimpoint, EOTECH and SIG Sauer have all been awarded contracts to provide weapon sights for various weapon systems as a part of the UK’s wider Support Weapons Enhanced Sighting Systems (SWESS) program. Overall, the SWESS program is looking to acquire around 12,000 [Read More…]
Back again? Can’t get enough Friday Night Lights? Have you looked at all of our night vision and thermal-related articles? If not click here to see all the articles I have written. Well, today we take a look at another rare thermal device, a Thales Sophie thermal [Read More…]
We looked at the Villain Weapon Systems diffuser for the DBAL-D2 almost a year ago. In that time he has been busy making other upgrades like focus lenses and diffusers for MFAL (Multi-Function Aiming Laser). Like a focus lens for the L3 ATPIAL-C and makes it useful. [Read More…]
Hello nocturnal enthusiasts and welcome back to another Friday Night Lights. Last week we took a look at some alternative ANVIS systems. Well, this week we look at something you might consider unique, for the US market. The Theon Sensors MIKRON-D is their lightweight [Read More…]
Do you have a Streamlight TLR-VIR II as your budget night vision aiming laser? Do you find the IR illuminator to be a little underwhelming? Well, Goonin Gear LLC and Villain Weapon Systems have been collaborating on an External Focusing Lens for the Streamlight TLR-VIR [Read More…]
Hello readers. Did you enjoy reading last week’s article about Gibbous Outfitters’ MP5K upgrades? This week we take a look at ANVIS alternatives. Specifically, the AVS-6 (V2) and PVS-23. These are goggles based on the ANVIS design but have very specific use [Read More…]
Welcome back to this week’s Friday Night Lights. Last week we took a look at the Tracer Tactical Head Harness. Well, this week we revisit our friends at Gibbous Outfitters and see what they have come up with now. Gibbous Outfitters upgrade the MP5K, the infamous [Read More…]
Friday night is here and you know what that means, Friday Night Lights! Last week we took a look at a very rare and obscure thermal spotter, the Elbit CORAL-SD. Well, today might be even more rare and obscure. The Optics 1 ECOSI (Enhanced Clip-On SWIR Imager) is a [Read More…]
Hello and how are you on this Friday night? Did you enjoy reading about the Thermal Camo 2.0 test last Friday? Well, today we have a very rare and obscure thermal spotter, there CORAL-SD by El-Op which is a division of Elbit Systems. More Thermal Spotters @ TFB: Friday [Read More…]
Thank you for joining us here at TFB and specifically my Friday Night Lights series. Last week I wrote about the Nocturn Daisho bridge that combines two Nocturn Tanto monoculars into an articulating dual-tube binocular goggle. This week I will be showcasing some results [Read More…]
While I am not a long range shooter nor do I shoot clip on night vision, I do know that MDT makes quality gear. The MDT ACC Elite NV Bridge allows for the use of clip on night vision or thermal optics in front of a magnified optic when using the MDT Elite Chassis. [Read More…]
Salutations and a warm welcome on this Friday night. Last week we took a look at the Wilcox RAPTAR S. Well, today we have something that has been long awaited from Nocturn Industries, their TAPB (Tanto Articulating Powered Bridge) aka Daisho bridge. More From Nocturn [Read More…]
Are you nocturnal or crepuscular? Well, either one you are all welcome to this week’s Friday Night Lights. Last week we looked at a somewhat obscure full-power laser, the ATILLA-200. This week we take a look at a long-range laser rangefinder with MFAL [Read More…]
Welcome back to another article in our weekly Friday Night Lights series. Last week we took a look at a long-since-discontinued cooled thermal imager called the FLIR SeeSpotIII. Well, today we take a look at a laser aiming module of the same vintage. Circa 2003 NVEC Inc [Read More…]
Lately, I have been on a thermal device kick. Last week we took a close look at a BAE RED-I which allows the user to remotely view a video signal in a wearable microdisplay HUD. It was used with thermal weapon sights like the PAS-13. Well, today we take a look at an [Read More…]
Two weeks ago Gregory Knowles posted some photos from what looks like an industry convention. They were photos from what appears to be a Thales booth showcasing their new QNVG (Quad Night Vision Goggles). Quad Tube Night Vision @TFB Friday Night Lights: Nocturn [Read More…]
Thanks to my friend Vic for letting me know about this. MK Machining is a well-known producer of 3D printed items as well as a cool bullpup chassis for the Remington 700. They produce a lot of products for other companies but they do make their own products such as [Read More…]
Good evening everyone and welcome back to another Friday Night Lights. Last week I wrote about the PAS-28 MRTB, a medium range thermal bi-ocular. Well today is tangentially related, it is the BAE Oasys RED-I (Remote Eye Display – Imager). A monocle HUD for remote [Read More…]
Welcome back FNL enthusiasts. Did you enjoy last week’s article on the Oasys UTB? Well, today we take a look at another thermal bi-ocular, the PAS-28 MRTB aka PhantomIR by Elcan Raytheon. Thermal Bi-Oculars @ TFB: Friday Night Lights: Oasys Universal Thermal [Read More…]
Greetings nocturnal enthusiasts and thank you for joining me here at Friday Night Lights. Last week I shared how my friends and I shot 2,200 yards in the dark. Today we take a look at another piece of Oasys Technology’s thermal lineup. This time we take a close [Read More…]
Thank you for joining us here at Friday Night Lights. Last week we took a look at some weapon lights of yesteryear. Well, this time we go back to the dark and try to hit things far, far away. This is an evolution from the Dark Mile where my friends and I shot a mile [Read More…]