The Griffin Armament SN-ACH Gen 2 Charging Handle (Suppressor Normalized Ambidextrous Charging Handle) is quite the mouthful and is now available (between the product name and that quip, how many sexual innuendos can we make by the end of this article?). If you do a lot [Read More…]
Devil Dog Concepts came up with an AR-10 version of their Hard Charger AR-15 side charging handle. Like the Hard Charger, the new Devil Dog Concepts HC-10 is a drop-in product that replaces the standard charging handle providing a left-side non-reciprocating charging [Read More…]
Strike Industries has just announced its newest aftermarket accessory for the SIG Sauer P320 platform – their Ambidextrous Side Charging Handle. This charging handle replaces your slide cover plate and can be reversed to accommodate left or right-handed shooters [Read More…]
Ambidextrous charging handles can be extremely useful (especially for wrong-handed people). The folks over at Tyrant Designs have just unveiled their newest offering for the AR-15 market with their new NexGen charging handle. The new charging handle features a simple [Read More…]
If you’re in the market for a new charging handle or fire selector then you could pick up both from RADIAN for a drastically reduced price for a limited time – that is as long as you’re okay with a few cosmetic blemishes. RADIAN is offering their [Read More…]
SilencerCo have announced the Gas Defeating Charging Handle, with the aim of reducing the amount of gas which blows back into the shooter’s face when firing a suppressed AR-15. The new ambidextrous charging handle incorporates a gas seal to prevent gas from [Read More…]
Smith Tactics has released a new AR-15 charging handle called SIDE-KICK Co-CHARGER. This is a drop-in product (for mil-spec upper receivers) that provides a left-side non-reciprocating charging handle while still retaining the standard AR-15 charging possibility. [Read More…]
When it comes to hunting and shooting modern sporting rifles (commonly referred to as AR-15/AR-10 rifles) most of the essential components that make up these firearms are merely an after-thought. That is, unless they fail you. If shooters allow their rifle to get too [Read More…]
I’ll admit it. I’ve succumbed to the temptation to buy some pretty cheap ammo over the last year and a half and while I’d like to say that most of that ammo would run fine through all of my ARs, it sometimes just isn’t the case. Removing a stuck [Read More…]
Expanding their line of pistol slide mounted charging handles, Recover Tactical has released a more advanced version of these accessories for Glock pistols. The new Recover Tactical PCH not only provides rear extensions designed to make racking the slide easier but also [Read More…]
Nobody likes gas in their face. Trust me, I grew up with two brothers. This is especially true when firing an AR-pattered rifle or pistol. Strike Industries, with a constant focus on innovation, has its own solution to this problem. The new T-Bone Charging Handle is [Read More…]
ODIN Works has introduced a new AR-15 charging handle called Diverge. According to the company, the overall shape, extended latch and the material this charging handle is machined from (7075 aluminum), increase its grip area by 500% and make it 65% wider and 140% [Read More…]
New for 2021 from Aero Precision is a product that was teased as a prototype back in 2020 – the Breach charging handle. The Breach takes a hard look at conventionally accepted charging handles and incorporates some unique and clever design decisions in order to [Read More…]
In this episode of TFBTV, James Reeves speaks with Jeff Carson of Aero Precision about their new Breach charging handle, a charging handle that will be compatible with AR-15s. The breach will be fully ambidextrous and heavy-duty. It will be available in a small and large latch version. James used [Read More…]
Charging handles – some don’t care about them and some love to style them, but we all need them. Strike Industries are now offering their SI M4 AR-15 charging Handle in new colors that are called REDLINE, BLUELINE and FDELINE. These will only be available [Read More…]
The Limited Edition charging handles from Radian Weapons have become a classic. My all time Raptor favorite is still the 24K Gold Plated Raptor Dictator Edition which I unfortunately missed out on, but the Radian Mad Dog Raptor isn’t bad either. For this year, [Read More…]
Kalashnikov USA’s popular KP-9 pistol has made quite a splash in the pistol caliber carbine revival, which means that the aftermarket is starting to ramp up. While browsing Reddit, I found a product made for the KP-9 that replaces the hollow gas tube with a [Read More…]
Daniel Defense has announced that the GRIP-N-RIP charging handle that was previously seen in new DD5 rifle models, is now available separately. The new ambidextrous charging handle has two versions – for AR-15 and AR-10 pattern weapons. This accessory is packed [Read More…]
We have previously covered the Infitech Ruger PC Carbine Aimpoint Micro Mount and other accessories, but it was now time to put them on an actual rifle. I probably have spent more time upgrading and evolving my Ruger PC Carbine (hunting version) than shooting it, but [Read More…]
Today’s POTD doesn’t actually portray any firearm, but the connection with the AR-15 is obviously strong. It is the Helm Forge ST-1 self-defense tool. At first glance, the item looks like a modern style ambidextrous charging handle, similar for example to the [Read More…]
Battle Arms Development has first introduced the prototype of RACK ambidextrous AR-15 charging handle at SHOT Show 2018. Recently, they released more information about this charging handle and announced that it is now available for preorder. According to Battle Arms [Read More…]
For this year’s Veteran’s Day t’s time for a new Limited Edition of Radian Weapons’ Raptor Charging Handle. It goes on sale on Monday the 12:th of November, and is called “The Pioneer”. Radian Weapons are planning to raise $20,000 for [Read More…]
Radian Weapons has introduced a new AR-15 charging handle called Raptor-SL. This new product is based on the company’s Raptor charging handle series. Unlike the more common tendency of new charging handles coming with extended latches, the Raptor-SL has latches of [Read More…]
JL Billet has developed an AR-15 charging handle that turns the semi-auto AR-15 pattern rifles into a straight pull bolt action rifles. This accessory is called Kali-Key. It is primarily designed for the states with restrictive gun laws. According to the company, use of [Read More…]
Armaspec has introduced a new ambidextrous AR-15 charging handle called Victory. The company takes pride in the design of this product and has incorporated a number of cool features into it. In fact, Armaspec notes that this is a patent-pending product which means they [Read More…]
Battle Arms Development (BAD) came to NRA 2018 with a handful of new items designed for form, versatility, and function as well as being aesthetically pleasing. George Huang, owner and CEO of BAD spent some time with TFB going over the assortment of AR and Glock [Read More…]
TACCOM has released several new accessories for the Ruger PC Carbine. Among the new TACCOM products, there are an extended charging handle and a funneled magazine well. Let’s take a brief look at each of these two accessories. Extended Charging Handle This TACCOM [Read More…]
A couple of months ago I wrote an article telling about how a Russian guy converted his Vepr 308 hunting rifle into a tactical one using mostly homemade parts and modifications. Recently, the same man (Andrey) came up with another DIY project. He made a [Read More…]
Bravo Company Manufacturing (BCM) has introduced the second generation of their Gunfighter series of AR-15 charging handles. The new handles come in standard or ambidextrous versions. Each of these two versions is also available with two latch length options. [Read More…]
Battle Arms Development introduced two SBRs chambered in .300 BLK with 7.5-inch barrels as apart of a new historically themed product release. The difference between these two SBRs is the fact that on the Tanker, the buffer tube is a separate piece from the lower [Read More…]