KE Arms Introduces the Improved Rekluse RTS-2 Trigger

Luke C.
by Luke C.

KE Arms makes more than just lowers and uppers, they also make virtually every other AR part you could imagine replacing including their very own line of aftermarket drop-in style triggers. Their new RTS-2 Rekluse trigger is the latest evolution of KE Arms’ triggers including their Sear Link Technology triggers. This new version includes an improved design to include a full mil-spec power hammer spring, and a more sealed design to protect against debris.

More from KE Arms @ TFB:

KE Arms Introduces the Improved Rekluse RTS-2 Trigger

The RTS-2 REKLUSE Is the next evolution of our proven Sear Link Technology trigger systems. The RTS-2 REKLUSE has an even more sealed design to isolate its moving parts from fouling and debris. It also has a full milspec power equivalent hammer spring making it more reliable with combloc and old surplus primers. This heavier spring makes the RTS-2 reliable with the Sig MCX and .22 kits with firing pin springs.

The RTS-2 is the same as our RTS-1 with a simplified trigger bow.

-4.5 POUND SINGLE STAGE TRIGGER PULL

– MINIMAL TAKEUP AND OVERTRAVEL

– ULTRA-CRISP BREAK
-IMPROVED TACTILE RESET

– DRASTICALLY REDUCED SPLIT TIMES

– SIMPLE DROP IN INSTALLATION

EFFICIENT ENERGY TRANSFER
– There is no disconnector for the hammer to drive through, thus creating a more efficient cycle of the bolt simply pushing the hammer out of the way as the gun fires.
– Forces of the bolt on the hammer are not transmitted into any other components of the trigger assembly.

– Constant sear engagement against the hammer means the trigger is always ready to reset and fire.

IMPROVED SAFETY
Due to the unique geometry of the trigger, the safety can always be applied regardless of the hammer being down or cocked. When used appropriately this adds another level of safety to administrative handling and clearing of malfunctions.
IMPROVED RELIABILITY
Moving parts are sealed making it much less susceptible to fouling and debris.
IMPROVED LONGEVITY
No impact on moving internal parts increases longevity of the trigger system.
ANY CALIBER
The RTS-2 has been tested thoroughly with traditional AR calibers and pistol caliber blow back systems. It has also been tested in the Sig Sauer MPX with no damage.

INSTALLATION

The RTS-2 REKLUSE Drops into mil-spec fire control pockets and is retained with standard fire control pins captured by springs inside the housing bushings.

Unit Weight 0.16 Pounds

The new RTS-2 Rekluse Trigger is available for a base price of $275.95 and can be ordered with standard AR-15 pins or with the extra-length pins meant for use with the KE Arms KP-15 lower receiver. You can also bundle the trigger with one of KE Arms’ ambidextrous fire selectors. For more information, you can visit the product page here.

Previous Generation RTS-1 Trigger
Luke C.
Luke C.

Reloader SCSA Competitor Certified Pilot Currently able to pass himself off as the second cousin twice removed of Joe Flanigan. Instagram: https://www.instagram.com/ballisticaviation/

More by Luke C.

Comments
Join the conversation
 9 comments
  • A Bored Banker A Bored Banker on May 02, 2023

    Those are geissele prices. Is there any reason to buy this over a geissele?

    (Serious question, not sarcastic)

    • See 7 previous
    • Lowell houser Lowell houser on May 11, 2023

      @int19h I have an SLT-1 in my current build. I plan to machine another one in the coming months for my channel and currently plan to pin another SLT-1 in that future build. I definitely recommend them.

Next