[SHOT 2022] CAA Releases AGADA PCC and Gen3 Micro Conversion Kit

Benjamin F
by Benjamin F

CAA has been showing off their new 9mm PCC, the AGADA, as well as their new Gen3 Micro Conversion Kit (MCK).


CAA Releases AGADA PCC and Gen3 Micro Conversion Kit

Rifles have remained largely the same basic configuration since the age of the matchlock. Essentially, all rifles have been in a “broomstick” straight-line configuration. CAA’s newest release aims to try and change that. By adapting the rifle to the human body, instead of the human body to the rifle.

The AGADA (Hebrew for “Legend”) moves the pistol grip and foregrip to opposite sides of the gun, instead of underneath, and angles both up dramatically. When holding the rifle your body falls into a very natural “boxing” stance. Your dominant hand ends up close to your cheek, and your weak-side hand is held out in front of you. Anyone with martial arts training will recognize this as a very basic fighting stance. The trigger sits comfortably under your strong-side index finger and can be “pulled” by pressing straight down.
[SHOT 2022] The CAA AGADA - Note the upward-facing trigger
Additionally, the AGADA will feature a widened, oversized magwell to allow for ease of reloading, a fully adjustable cheek-riser on a folding stock, grip and cross-bar safeties, and a last-round bolt hold open. The CAA AGADA will take Glock magazines or CAA’s proprietary mags interchangeably.
[SHOT 2022] The CAA AGADA - The oversized magwell

The New Micro Conversion Kit

[SHOT 2022] The CAA Gen3 MCK
Not content just with the AGADA PCC, CAA is also releasing the third generation of their MCK. This new Gen3 takes feedback that CAA has been receiving from its customers and incorporates it into the redesigned chassis. The new Gen3 MCK will be compatible with slide-mounted pistol optics, or users can attach frame-mounted picatinny rails to use whatever optic they choose. The brace is adjustable up or down, to allow the user to align themselves with either option.
[SHOT 2022] The CAA Gen3 MCK
Further, the brace is folding, and the user can change which side the brace folds to by swapping out a single pin. The frame has two cut-outs in it to allow for the use of a pistol back-plate mounted charging handle, which again can be swapped to either left or right side use.
[SHOT 2022] The CAA Gen3 MCK - This 3D printed prototype shows the swap-able pin-holes.
The kit also comes with a new “car-wash” system at the front. Stiff nylon bristles will clean off carbon build-up from the slide every time the action cycles, without scratching the finish.
[SHOT 2022] The CAA Gen3 MCK
In terms of compatibility, the new Gen3 MCK will be compatible with Gen 3 through 5 Glock 17/19/19x/20/21/22/23/25/31/32/45.
[SHOT 2022] The CAA Gen3 MCK

Fast Facts about the AGADA

  • Caliber: 9mm
  • Barrel Length: 10″ or 16″ versions
  • Magazines: Glock compatible
  • MSRP: $899
  • Release Date: April 2022

Fast Facts about the Gen3 MCK

  • Compatibility: Glock 17/19/19x/20/21/22/23/25/31/32/45 Gen3-5
  • Suppressor Compatibility: 1.57″ suppressor
  • MSRP: $349
  • Release Date: March 2022

You can read more about both the AGADA and the Gen3 MCK on CAA’s website.

Benjamin F
Benjamin F

Benjamin is a law student living in Maryland. He was introduced to firearms at summer camp when he was thirteen. Ever since his first shot with a .22LR bolt-action he has been in love with shooting sports. He is a moderator on the TFB Discord, which can be found at https://discord.gg/bcVD9zw, and can occasionally be found on twitter @BFriedmanUSA.

More by Benjamin F

Join the conversation
2 of 25 comments