After the success of the Mark23 special, Jake from 1911 Syndicate asked if I would help him cover the HK G36C.  Unknown to me, Jake had linked up with SK Arms who was bringing up not one, but two G36s.  Happy to help wherever I was needed, I packed up the truck and headed out to the desert once again.

TFB Collab: HK G36C with 1911 Syndicate

TFB Collab: HK G36C with 1911 Syndicate
Photo Credit: David Boyd

As you’ll see in the below video, we ran these guns hard and they performed flawlessly.  For as light as it is, the G36C has very manageable recoil in full auto.  By the end of the day, I was referring Jake and Chris over to Tommy Built Tactical so they could look at picking up the next best thing.

NOTE: The video contains some NSFW language.

In regards to those specs I might have missed or messed up, here’s the full rundown from HK.

Specifications:

• Overall Length: 19.76″
• Width: 2.56″
• Height: 10.91″
• Barrel Length: 8.98″
• Sight Radius: varies
• Weight (with magazine): 6.56 lb
• Rate of Fire: 750 Rounds Per Minute

Below is the full product description from Heckler and Koch:

With its short 8.98 inch (228 mm) barrel and buttstock folded, the G36C (compact carbine) has an overall length of less than 20 inches— shorter that an MP5 submachine gun. It is the perfect 5.56 mm weapon for use in confined areas such as a vehicle. The G36C can even be fired with its buttstock folded. With the installation of an HK G36 magazine conversion magazine well, the G36C can use widely available AR/M16/M4 type magazines.

Optional accessories, including laser aimers and weapon lights can be mounted on MIL-STD-1913 Picatinny rails that attach to hard points (at the 3, 6, 9 o’clock positions) on the weapon’s free-floating handguard. Optical sights can be easily installed on the MIL-STD-1913 Picatinny rail on the top of the receiver. Several accessory buttstocks are also available, including stocks adjustable for length-of-pull and cheekpiece height.

Developed by Heckler & Koch in the mid 1990s, the G36 is a true modular weapon system in caliber 5.56 x 45mm NATO (.223 Remington). Constructed almost entirely of a tough, carbon fiber reinforced polymer material and using a simple, clean shooting, self-regulating, operating rod gas system; the G36 provides the user with a lightweight weapon that delivers high performance with extremely low maintenance.

The G36 uses an HK-proprietary operating system found on several current Heckler & Koch arms, including the HK416. The G36 gas system uses a piston to drive an operating rod to control the function of the bolt, preventing propellant gases and the associated carbon fouling from entering the weapon’s interior. This increases the reliability of the weapon and extends the interval between stoppages. It also reduces operator cleaning time, heat transfer to the bolt and bolt carrier, and wear and tear on critical components.

All G36 variants use a barrel produced by Heckler & Koch’s famous cold hammer forging process; further improving reliability, service life, and operator safety during obstructed bore occurrences or in extreme extended firing sessions.

The barrel of any G36 variant can be exchanged by a unit armorer to create a rifle, carbine, or compact carbine, using the same common receiver. Exhaustively tested and currently fielded with the German and Spanish Armed Forces the G36 is also used by military, law enforcement, and government customers of more than 40 countries.

More information on the HK G36C and other G36 variants can be found on the Heckler and Koch product page.  Thanks, again Jake and Chris from 1911 Syndicate for having me on their channel.