SIG SAUER Announces TANGO6T Riflescope Selected for US Army's Direct View Optic

Matthew Moss
by Matthew Moss
SDM-R testing at Fort Bliss with SIG Tango optic and OSS suppressor (Photo by US Army Sgt. Brian Micheliche, 1st Stryker Brigade, Public Affairs)

Last month we reported that SIG Sauer had been awarded a major contract to provide the US Army’s new Direct View Optic (DVO) which will be used on the current M4A1 carbine, replacing the venerable ACOG. An award notice valued at $77,168,400 was posted in September.

SIG Sauer TANGO6T – DVO

At the time SIG Sauer were unable to comment on the selection and contract award but have now shared a statement confirming the selection of the TANGO6T 1-6X variable-magnification riflescope.

The TANGO6T has already been selected as the US Army’s Squad Designated Marksman Rifle (SDMR) optic and US SOCOM’s Squad-Variable Powered Scope (S-VPS).

SIG SAUER TANGO6 1-6×24 Riflescope Selected for US Army Squad Designated Marksman Rifle

Here’s SIG Sauer’s announcement in full:

SIG SAUER, Inc. is proud to announce the TANGO6T has been selected by the U.S. Department of Defense for the Direct View Optic (DVO) in response to a solicitation to enhance squad performance with a variable powered riflescope. Unlike older generation non-magnified or fixed-magnification optics, the TANGO6T is a 1-6X variable-magnification riflescope that enables the soldier to engage both close quarter targets and targets at extended ranges.

This award from the U.S. DoD is the third award for the SIG SAUER TANGO6T; previously selections for the TANGO6T include the Squad Designated Marksman Rifle (SDMR) and the USSOCOM Squad-Variable Powered Scope (S-VPS). The TANGO6T riflescope is currently in use with the U.S. Army Squad Designated Marksman and U.S. Military Special Forces.

“After rigorous and stringent testing, where the best of the industry competed, we are proud to confirm the SIG SAUER TANGO6T riflescope has been selected by the U.S. Army as the Direct View Optic,” began Ron Cohen, President and CEO, SIG SAUER, Inc. “This is a three-peat for the TANGO6T as the riflescope continues to prove it will withstand the rigors of U.S. military testing making it the choice for use with our soldiers. The further proliferation of the riflescope into the U.S. Military’s M4A1 operating system is an exciting achievement for SIG SAUER Electro-Optics and further proof that the TANGO6T is the direction of the future.”

The TANGO6T 1-6×24 DVO riflescope will be used on M4A1 carbines and is a first focal plane ruggedized riflescope with a Flat Dark Earth (FDE) anodized aircraft grade aluminum main tube. The riflescope features the DWLR6 reticle capable of providing range estimation and wind holds at extreme distances, the advanced HELLFIRE illumination system for fast target acquisition, a locking illumination dial, Power Selector Ring (PSR) Throw Lever, the ALPHA4 ultralight mount, and a laser-marked scope level indicator for intuitive installation.

“The TANGO6T riflescope platform has been ruggedized and battle-hardened over the course of both the SDMR and S-VPS programs,” added Andy York, President, SIG SAUER Electro-Optics. “We are proud to assemble the TANGO6T here in the USA to support our warfighters with a variable powered riflescope that was developed to match the engagement requirements of today’s battlefield.”

The SIG SAUER TANGO6T 1-6x24MM riflescope is available commercially at local retailers and at sigsauer.com, in first and second plane, and varying reticles including 5.56/7.62 Horseshoe Dot, HELLFIRE MOA Milling, HELLFIRE FL-6 and the new DWLR6.

“This award solidifies the TANGO6T as the premier riflescope of the U.S. military as it continues to exceed the highest standards for ruggedization, range, and accuracy throughout testing protocols, and in the field with our soldiers. We are honored to partner with the U.S. Department of Defense as they continue to modernize their weapons systems and look forward to the continued proliferation of the TANGO6T amongst our fighting forces,” concluded Cohen.

All SIG SAUER TANGO6 riflescopes are designed and assembled in the USA at the state-of-the-art, ISO-certified, SIG SAUER Electro-Optics facility in Wilsonville, Oregon.

Check Prices on SIG Sauer TANGO6T Riflescopes



We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.
Matthew Moss
Matthew Moss

Managing Editor: TheFirearmBlog.com & Overt Defense.com. Matt is a British historian specialising in small arms development and military history. He has written several books and for a variety of publications in both the US and UK. Matt is also runs The Armourer's Bench, a video series on historically significant small arms. Here on TFB he covers product and current military small arms news. Reach Matt at: matt@thefirearmblog.com

More by Matthew Moss

Comments
Join the conversation
2 of 59 comments
  • William William on Nov 12, 2020

    I just wanna know where the taxpayer's ACOGs end up on the surplus market..

  • Noob Noob on Nov 15, 2020

    so is there also some kind of periscope thing to be the Indirect View Optic?

Next