If you do a lot of rifle scope mounting this may be a great tool and helpful for you. Even if you only do it occasionally, it’s always nice to know that the scope is levelled when you get to the shooting range.
For those who have made the mistake and arrived at the range only to realize they have to re-calibrate everything know what I mean. If that happens to you a lot, then check the details and the video out below, as this tool may be a good investment.
One requirement is that the scope has a flat section under its turrets, another is that you need at least 1/4 inch clearance for the tool to fit.
Fix It Sticks Scope Jack:
A new way to level your optic, the Fix It Sticks Scope jack works with any 1/4 inch driver to quickly and easily level your scope to your rail.
Just mount the scope jack to the pic rail under your scope and turn the drive handle until the lifting arm engages with the flat section under your turrets.
Once the scope is level, maintain pressure while tightening your ring screws to keep optic level throughout the process.
- Works with any scope with a flat section under turrets
- Needs a minimum of 1/4 inch clearance between rail and scope
- Pic rail must be accessible under optic
This product integrates with Fix It Sticks Replaceable Edition and T-Way Driver.
Below is a video description of how the tool works:
The normal price is $44.00, but is listed (now) at $36.00 during the pre-order special period.
Scope mount manufacturers Spuhr and others have similar products, but the solution from Fix It Sticks looks more advanced. However, it probably will not work on most one piece mounts, due to the lack of clearance.
You can find the product in Fix It Sticks’ shop here: https://store.fixitsticks.com/products/scope-jack
They also have more clever tools for owners of firearms, check TFB’s previous article.
What do you think? Is this something that may help you out?