Sector Optics is a new brand name in thermal imaging and rifle scopes market. It is the division of Torrey Pines Logic, which products include a wide variety of other electro-optical devices. In this article, we’ll take a look at the Sector Optics G1T2 riflescope system.
The Sector Optics G1T2 system consists of the company’s G1 scope with their ID (Internal Display) technology and the T2 thermal imager and rangefinder combination device. The T2 sits over the scope, in front of the turrets. It is plugged into the scope and basically allows to transmit the thermal image and range estimation values into the G1 scope’s internal display.
Perhaps the most valuable feature offered by this system is the ability to be aware of the events downrange thanks to the image of a much wider field of view in the internal display while having the scope itself zoomed in at any particular target. The G1 is a 1-8×24 scope and the thermal imager has a 3-8x optical zoom capability.
While visiting the Torrey Pines Logic booth at SHOT Show 2019, I asked the company officials what other benefits can this system offer for military and law enforcement applications. Apparently, besides the above described higher situational awareness feature, the internal display of the scope can also show other information too such as a text message from the command center or photo of the target.
Below you can find the tech specs of the Sector Optics G1T2 system quoted from the company’s website.
G1™
Magnification: 1-8x Objective Lens Diameter: 24mm Eye Relief: 3.5 in Field-of-View: 116.6-14.4 feet/100 yards Tube Size: 30mm Adjustable Turret: 1/2 MOA with capped turrets Brightness Control/ID™ Interface: Left turret w/ ID™ connector Max Elevation Adjustment: 90 MOA Max Windage Adjustment: 90 MOA Parallax Setting: 100 yards Length: 10 in Weight: 18oz Picatinny Mount: included ID Display: Direct view amber display Assembly: Water proof, fog proof and shock proof
T2™
Size: 108mm x 49mm x 96mm Weight: 400g without battery Zoom: 3-8x Continuous optical zoom with auto focus adjustment Field-of-View: from 18.7° to 7° Min. Focus Distance: 2 meters Min. Range Distance: 20 meters Focus: 1Focus free Spectral Range: 8-14 micron Power: CR123, 3V – 8+ hours of operation Resolution: 160×120 pixels FLIR Lepton Display: 1.5″ OLED Operating Temp.: -10° to +45° C Frame rate/Shutter: 9Hz with shutter
I tried to take some photos of the internal thermal display but it was quite challenging. Here are the best of the photos I took.