Bastion Gear GLOCK Magazine Disassembly and Pin Punch Combination Tool

    Bastion Gear GLOCK Magazine Disassembly and Pin Punch Combination Tool (1)

    Bastion Gear has introduced a Glock pistol tool which combines a pin punch with a magazine disassembly tool. The punch folds into the shaft of the tool making it a more compact package which would be easier to store. The magazine disassembly portion represents a bottle opener shaped hook with a built-in stud to engage the hole in the floor plate.

    Bastion Gear GLOCK Magazine Disassembly and Pin Punch Combination Tool (2)

    Once you hook the tool into the floorplate, you will then need to use the leverage of the handle to slide the floorplate out and disassemble the magazine. That’s a pretty straightforward process which is demonstrated in the video embedded below.

    Bastion Gear Glock magazine disassembly and pin punch combination tool is compatible with all generations of the following Glock pistol models: G17, G19, G20, G21, G22, G23, G25, G26, G27, G28, G29, G30, G31, G32, G33, G34, G35, G36, G37, G38 and G39. This tool is made of aluminum and has a black anodized finish. When the pin punch is deployed, the overall length of the tool is 8″. In storage configuration (with the pin punch folded) it is 5.5″ long.

    Bastion Gear GLOCK Magazine Disassembly and Pin Punch Combination Tool (21)

    This tool ships in a box that is shown in the video. It is available on the Bastion gear website at an MSRP of $29.99.


    If they could also incorporate a cleaning rod (with a bore brush on it) folding to the reverse side of the pin punch, that could be an ultimate field tool for Glock pistol cleaning and maintenance.

    Hrachya H

    Being a lifelong firearms enthusiast, Hrachya always enjoys studying design, technology and history of guns and ammunition. His knowledge of Russian allows him to translate and make Russian/Soviet/Combloc small arms related information available for the English speaking audience. Hrachya also writes for SilahReport.com
    Should you need to contact him, feel free to shoot him a message at [email protected]


    Advertisement