Strike Industries released several new products specific for the AR-15 and AR-10 platform.
R.EX Riser
The R.EX Riser is a low profile, lightweight riser for AR platforms. Set at the ideal height for co-witnessing while using the SI Reflex Exoskeleton mount with either A2 height, or Sidewinder sights (without spacer), the REX Riser is versatile and provides and solid mounting platform. While optimized for use with the R.EX Mount, the universal Picatinny pattern can be used with many other optics that can be mounted on picatinny sections.
Prices range between $29.95 and $31.95, depending on color selection.
Product Spec
– Weight: 2 oz
– Materials:
– Base: 6061-T6 Al, Requires 5 rail sections of space to properly mount.
– Total Length of picatinny riser: 2.09 inches
– Spacer: 6061-T6 Al
– Clamp: Steel
– Screw: Steel
– Finish:
– TIII Hard anodize (BK)
– TII Color Anodize
Package include
– 1x Riser Base
– 1x M5x30mm Cap Head Hex Screw
– 2x 10x3x.48mm spring
– 1x Clamp
– 1x Spacer
– 1x Riser rail
– 4x M3x6mm button head hex screw
Features
– Low profile rail riser
– Lightweight, 2 0z total installed co-witness height.
– Co-witness with A2 or Sidewinder Sight using R.EX Mount
– 3 picatinny slot sections
Instructions:
-Use the included spacer in conjunction with R.EX Mount for absolute co-witness with A2 height sights.
-Use R.EX Mount with no spacer to co-witness with Sidewinder Sights only.
Note: Medium Strength Loctite Recommended (Included).
Note: Uses a proprietary picatinny rail design. Will work for most mil-spec 1913 style rail attachments however.
M3 Screw Torque Specs: Do not exceed 10 inch-lbs and only hand tighten by holding onto the short end of the allen key included.
M5 Bolt Torque Limit= 25 inch lbs maximum with thread locker.
Shift Pins
The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate, and remove the pins as shown. This new design combined with our enhanced detent pins retained inside the pin springs assist in making assembly and disassembly an almost effortless task mith minimal tools and effort.
The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.
Prices range between $20.95 to $21.95 depending on color selection.
Product Specifications:
Size:
– Pivot Pin:Length: 1.31”
– Take Down Pin:Length: 1.08”
– Weight (set): 0.52oz
– Gross Packaged Weight: 0.7oz
Materials:CNC Steel
Finish:
– Black: Black oxide
– Gold: Gold plating
– Chrome: Chrome Plating
Contents:
– 1x Pivot Pin
– 1x Takedown Pin
Features:
– Less steps needed to remove pins
– Eliminates the need for a pin punch.
– Locks into place securely. Innovative QD rotation feature
– Nearly tool less assembly and removal
– Combine with the enhanced detent pins for easier assembly and removal
– Quick rifle assembly and disassembly
– Improved corrosion resistance
Note: Designed around Forged Mil-Spec receivers. May not fit some billet lower receivers.
Gunpowder Soap
The SI line of extreme duty weapons maintenance and protection solutions is now expanding to the sphere of tactical personal hygiene. Using non-toxic, plant based saponification agents; the operator can utilize the Gunpowder Soap to wash away noxious, position giving, odors while maintaining silky smooth, moisturized skin. Don’t let greasy fingers foul your personal electronics, or smudge optics glass.
Disclaimer: Avoid contact with eyes. In case of contact, flush with water. Try a small area first to see if any allergic reactions or breakouts occur. If you have any problems, discontinue use immediately. Strike Industries is not responsible for any damage resulting from the use of any product on our website. By purchasing items on our site, you are fully aware of our disclaimer and use products at your own risk. The SI Gun Powder Soap is for external use only. Does not contain actual gunpowder ingredients.
Warning: Slippery when wet! DO NOT DROP in public showers!
Product Spec:
– Dimensions: 2.93”x2.87”x1.54” Reuleaux triangle
– Weight: 4.0 oz
Package includes:
– 1x SI Gunpowder-Themed Soap Bar
Features:
– Limited Edition
– Plant based, Natural Ingredients, smooth operator scented.
– Antioxidant and moisturizing properties
– Tactical Black color for low light ablution operations
Instructions:
– Lather
– Rinse
– Repeat until noxious odors and surface contaminants are eliminated
Press release content provided by Strike Industries.