Sightmark Releases 3x "Tactical Magnifier Pro"

Nathan S
by Nathan S

Sightmark has announced the release of their “Tactical Magnifier Pro” in 3x magnification complete with easy flip-to-side mount. The new mount is designed to work out-of-the-box with standard Aimpoint, EOTech, and similar optics. Sightmark rates the sight as both shockproof and fogproof and should handle almost all abuse in its armored tube.

Not content to simply put a magnifier in a tube, the Pro series includes windage and elevation adjustments to put the reticle in the center of the sight picture. Further, eye relief was increased to 3.5″ so no more “scope eye” trying to zoom in on a target.

Retail is set at $179.97 and is currently shipping direct from Sightmark to consumer and distributors.

Full Technical Specifications (From Sightmark):

Product Specifications
Magnification (x)3x
Eye Relief3.5 / 88
Finish/colormatte black
Body Materalaluminum
Maximum Recoil (G’s800
IP Rating (waterproof)IPX6 (weatherproof)
Shockproof (yes/no)yes
Fog Proof (yes/no)yes
Lens CoatingAR green
Mount typeWeaver/Picatinny
Operating Temperature (F)-4 to 160 / -20 to 71
Length (in/mm)132 / 5.2
Width (in/mm)2 / 51
Height (in/mm)2 / 51
Weight (oz)12.1
Objective Lens Diameter28
Eyepiece Diameter24
exit pupil diameter8.5
Field of view (m@100m)10.5
Field of view (ft@100yd)31.5
Diopter adjustment+-3
Tube diameter30/1.18
Lens materialglass

Full Presser Below:

Sightmark Introduces New 3x Tactical Magnifier Pro

Rapid flip-mount design for short and long range targets

(MANSFIELD, TEXAS) – Sightmark is proud to release the new 3x Tactical Magnifier Pro, offering versatility by increasing the magnification of accompanying sights for greater range and improved target acquisition. In one swift motion, the new flip mount design makes it fast and easy for shooters to increase their magnification for accompanying sights, creating a greater engagement range in any situation.

Director of Product Development Jonathan Horton said, “The new flip to side mount is easy to operate and provides a quick, smooth transition to offset your magnifier between engagements of long range and short range targets.”

The durable magnifier has been redesigned to provide increased eye relief, making it safe and comfortable to use for higher caliber weapons. The new Sightmark 3x Tactical Magnifier Pro has been improved with a rubber armor housing for increased durability, providing 3.5 inches of eye relief for refined shooting comfort. Shooters are aided with improved target recognition with the new 3x magnifier that also features external windage and elevation adjustments for reticle alignment. This Sightmark 3x Tactical Magnifier Pro is also EOTech and Aimpoint compatible.

Visit Facebook and Twitter to learn more about Sightmark® products.

About Sightmark®

Sightmark manufactures award-winning products including riflescopes, gun sights, laser sights, night vision, flashlights, bore sights and other shooting accessories. Inspired by military and law enforcement technology, Sightmark products are designed for hunting, competition shooting, home defense, personal safety and tactical uses.

Nathan S
Nathan S

One of TFB's resident Jarheads, Nathan now works within the firearms industry. A consecutive Marine rifle and pistol expert, he enjoys local 3-gun, NFA, gunsmithing, MSR's, & high-speed gear. Nathan has traveled to over 30 countries working with US DoD & foreign MoDs.The above post is my opinion and does not reflect the views of any company or organization.

More by Nathan S

Join the conversation
4 of 10 comments
  • Nadnerbus Nadnerbus on Aug 27, 2015

    I put my Aimpoint on a cantilever mount to make room for a magnifier at some point, then realized I would probably never have enough money to justify spending another 500 or more bucks on one.

    I'm sure this is nowhere near as good as the Aimpoint or Eotech, but it might be just right for my purposes, which is to say shooting for fun. 4 moa dot on the Aimpoint anyway, so I don't need to be too fine.

    • See 1 previous
    • DAN V. DAN V. on Aug 27, 2015

      @Rick5555 I got a primary arms tripler with the flip to side mount. Epic failed on the installation, where it flipped to the wrong side. Then I conpletely stripped all the screws trying to fix that.

      Wrote PA customer service and they replaced it for free. Then I ordered their microdot to pair with the tripler. Definitely a nice package on top of the AR.

  • Blake Blake on Aug 28, 2015

    Why must the reasonably priced magnifiers and mounts all swing left into the field of view of a right handed shooter? I have my Vortex magnifier mounted backwards but that makes getting to the release button quite a bit harder.