The Firearm Blog

CZ USA are now selling the VZ 58. The VZ 58 is chambered in 7.62×39mm and although it looks like the AK-47 the similarities end there. Internally it is completely different.

VZ 58 Tactical Sporter

VZ 58 Military Sporter

The Czech SA Vz. 58 service rifle is now available from CZ-USA in 2 semi-automatic only versions, the VZ 58 Tactical Sporter, and the VZ 58 Military Sporter.

The Sa vz. 58 was developed by Ing. Jiri Cermak in 1956 and 1957, adopted by the Czechoslovakian army in 1958. and was produced by Ceska Zbrojovka in Uhersky Brod, Czechoslovakia until 1983. Approximately one million Sa vz. 58 rifles were produced during it’s 20 year production run. As of 2007, it is still the standard issue service rifle in both the Czech Republic and Slovakia.

The new Tactical and Military Sporter models are manufactured by combining original Sa vz. 58 components with a new semi-auto only milled receiver, a new trigger mechanism and new fire control parts.

While the appearance of the VZ 58 looks similar to the AK-47, it was inspired by the German StG 44 and initial development was actually based on the 7.92 x 33. Mechanically, the VZ 58 is completely different from the AK-47, and no parts including magazines are interchangeable.

Differences between the VZ 58 Sporter and the AK-47

* The VZ 58 has a milled receiver, the AK-47 is stamped.
* Even with the milled receiver it is almost one pound lighter than a stamped AK-47.
* The bolt of the VZ 58 stays open after the last round in the magazine has been fired.
* The VZ 58 has a more natural point of aim and is faster handling.
* The safety is more ergonomic making a faster first shot possible with the VZ 58.
* The ejection port is HUGE. There is no chance of an empty case getting stuck in the action of the VZ 58.
* The VZ 58 gas piston can be removed or exchanged without tools.
* The alloy magazine of the VZ 58 is half the weight of the steel AK-47 magazine. (.42 lb. vs. .84 lb.)
* VZ 58 is easier to field strip.
* The VZ 58 is striker fired unlike the hammer fired AK-47. This reduces the number of parts and possible points of failure.

More here.

I came across a PDF, with no date or author, about the history of the Chinese M14 clones. It is a very interesting read!

UPDATE: H2O MAN in the comments below let me know that the text comes from “M14 Rifle History and Development” by Lee Emerson. Thanks H2O MAN.

A persistent rumor states that M14 rifles produced by the People’s Republic of China were reverse engineered from enemy captured M14 rifles in Viet Nam. China North Industries Corporation, known as Norinco, is reported to have produced M14 rifles by the early 1970s. The story continues that 100,000 Chinese M14 rifles were produced for an armed revolution in the Philippines. In preparing for this work, the author interviewed a very reliable source with extensive firsthand knowledge of Chinese and Taiwanese production and export of small arms was interviewed for this work. This gentleman wishes not to be identified. He is referred to as Other Source # 12.

Chapter 6 contains the History of the Chinese M14 Clones. The PDF can be downloaded here.