Suppressor maker Advanced Armament Corp now have a company blog. Go check it out.
AAC Rimfire Suppressor.
I hope more and more businesses in the firearm industry start blogging and actively join in the gun blogging community.
Wodger Wabit over at RFC machined a suppressor adapter for a Volquartsen carbon-fibre wrapped barrel threaded for a .22 muzzle break so that both can be used. Neither the suppressor nor the muzzle break need to be modified. Very cool.
The muzzle break and the threaded barrel
Threaded barrel with adapter
Adapter screwed in, ready for the suppressor.
UPDATE:
The creator of the adapter, Roger, just sent me an email. Check out his website. It contains lots of interesting information on suppressors and air gun hunting.
Kel-Tec displayed their new RFB 7.62×51mm (.308) bullpup rifle at SHOT Show. SMGLee took some great photos.
With suppressor, nice!
Wikipedia has this to say about the rifle:
The Kel-Tec RFB High Efficiency Rifle (Rifle, Forward-ejection, Bullpup) is a gas-operated semi-automatic rifle with a tilting breechblock locking mechanism, manufactured by Kel-Tec Industries of Florida. It loads the 7.62×51mm NATO (.308 Winchester) cartridge and uses metric FAL magazines. The rifle uses a patented forward-ejection system via a tube placed over the barrel that ejects the spent case forwards, over the handguard of the rifle.
The rifle is a forward ejecting semi-automatic firearm chambered in 7.62 mm NATO (.308 Winchester), utilizing a short-stroke gas piston. To avoid the sloppy trigger pull typical of bullpup style firearms, the RFB utilizes a floating linkage bar between the sear and the hammer, allowing the sear to remain above the trigger. The weapon is fully ambidextrous, much in the style of the French FAMAS bullpup assault rifle. The RFB accepts FN FAL style magazines, and is delivered without iron sights. A mil-spec Picatinny rail is standard.
Here is a video of the rifle, clearly showing the forward ejection.
Kel-Tec plans to offer three different four versions each with a different barrel length:
The rifle is expected this quarter (1st quarter 2008) in the forth quarter, see the comments by dogon1013.
More images after the jump.
CCI have renamed Quik-Shot as SHP (Segmented Hollow Point) and are now offering it as a subsonic round!
It will drive a 40 gr bullet at 1050 ft/s with 98 ft/lbs of energy! This is great news for me. I have been using Quik-Shot but since I use a suppressor subsonic is preferable.
CCI’s unique Segmented Hollow-Point (SHP) bullet is now available in 22 Win Mag and a 22 Long Rifle subsonic load. This offering is ideal for bigger targets that require a larger wound area and makes perfect sense in the 22 WMR. The flat-shooting SHP is designed to break up into three sections on impact for even more stopping power. These three segments diverge from the main path for unique terminal performance on game. The subsonic 22 LR offering is great when hunting around a populated area and a quiet, effective round is needed.
More here.
I came across a cool photo of an MP5SD with mini-uzi type stock.
Click to expand image.
Hat Tip: MilitaryPhotos.net
This video from SHOT Show 2007 shows Advanced Armament’s new suppressors. Including a quick release suppressor designed for the SCAR-L, the quietest .45 pistol suppressor (or so they claim), a new AR-15 and .22 suppressor.
From B.B. Pelletier:
a class three dealer examined it and said in his opinion it could not be removed and attached to a firearm with success.
Gamo has taken pains to make the outer case tapered front-to-rear, plus they have molded two huge flutes into the side of the case. They’ve also made holes in the flutes that expose the sides of the baffles, which are a soft synthetic material, to the air.
It was his opinion that the silencer would be too difficult to remove from the rifle without destroying it, and, even if it could be removed, that the baffles would blow out the sides if exposed to even the low pressure from a .22 rimfire cartridge. In other words, it wouldn’t silence a firearm for even one shot.
More here.
B.B. Pelletier reviews the Gamo Whisper, Gamo’s suppressed air rifle which I blogged about recently.
Noise is what the new Gamo Whisper is all about, and I’ll address that issue for you right now. I don’t find the Whisper to be that much quieter than any other spring piston air rifle of comparable power. In fact, my tuned .22-caliber Beeman R1, which has no silencer, is quieter because its powerplant makes less noise. The powerplant is where the bulk of the noise of a spring gun comes from, not the discharge at the muzzle.
More here.
Hi, welcome to my gun blog! This blog is dedicated to all things firearms related. If you are into AR-15 and AK rifles, skeet shotguns, self defense pistols or hunting arms there will be something here for you. I hope you enjoy it.
I want this blog to appeal to a worldwide audience and so I will be focusing on firearms and shooting rather than country specific politics. There are already many great blogs defending your rights!
- Steve