Manford Trens has published photos of the process he went through to turn his factory Ruger 10/22 stock into a beautiful lightweight and ergonomic and stock.
I am inspired!
[ Many thanks to Cameron for emailing me the link. ]
The ENDO Tactical Stock Adapter Glock Edition (TSA-G) is an adapter that allows any AR-15 / M16 compatible stock to be attached to a Glock pistol.
Glock with Magpul UBR stock, 33 round magazine and sling.
The adapter can be easily attached and removed in about 30 seconds. The benefits of such a system are numerous. Even with the stock attached it is small enough to be carried concealed under a jacket – unlike a rifle or carbine. The stock improves accuracy by steadying the pistol against the shoulder. This also helps soak up recoil allowing faster followup shots.
The downside of such a system, for civilians, is that any pistol it is used with must first be registered as a Short Barreled Rifle (SBR) with the BATFE. I am no expert, so don’t quote me, but my understanding is that carrying an SBR concealed, even without the stock, would not be allowed with a CCW permit in many, or all, states.
Another downside is the total cost of the weapon system. If we assume a new Glock 17 costs $500, then add $200 for the ATF stamp, $154.99 for the ENDO stock adapter and $60 for a Magpul MOE Carbine Stock, we get a total cost of 914.99! This is a lot more than a 9mm carbine such as the $400 Kel-Tec SUB-2000.
Cost aside, I really like the system. I don’t think there will be a shortage of enthusiasts who will be willing to pay. I expect ENDO will be marketing this heavily to Law Enforcement Organizations who carry Glock pistols.
The system is compatible with the G17, G22, G24, G31, G34, G35 and G18 (including the L, C and RTF versions).
On a side note, I am surprised by the attachment mechanism. A steel detent pin must be manually pushed through the pistol backstrap. Compared to the system used by the FAB Defense (Israel) stock which clips in, it takes longer to install and is more of a fiddle. I wonder if the clip system is patented.
The FAB Defense stock
The ENDO stock
A big thanks to Kevin for links and information.
CNBC’s Fast Money show talks to Michael Golden, CEO of Smith & Wesson, about the gun market and how S&W is faring.
He says that the gun market is cooling but S&W’s M&P rifles and tactical rifles are selling well. I do not dispute that S&W is doing well, but I find it hard to believe S&W, or Ruger, will be able to maintain their current stock prices. Both stocks have more than doubled since February courtesy of the gun buying frenzy.
Golden mentions the M4 competition. I expect they will have sometime more interesting up their sleeve than the M&P4, a pretty standard direct gas impingement M4 clone, which the Military Times reported a while back that S&W would be entering.
Later this year TROY will be selling a Modular Chassis Systems for the Mini 14. The orginal TROY Modular Chassis Systems is an excellent, albeit expensive, stock for the M14 / M1A. It makes perfect sense to scale it down for the Mini 14 which was a very similar external appearance to the M14, which it was modeled on.
The MCS comes with front and rear TROY BattleSights, an M4 style stock and M4 pistol grip. The weight of the stock is 3.4 lbs and will be available in black or “flat dark earth”.
The price will be $845.
More info here.
KNOXX (Owned by Blackhawk) have introduced a tactical style stock for the Ruger 10/22 rifle called the Axiom R/F. My guess is that the R/F stands for RimFire.
As you can see in the photo, the stock features a 6-position M4 style adjustable stock, pistol grip and free floating barrel channel. The MSRP is $99.99
I think this is going to be a *very* popular product. I think the price is good and it has been build for accuracy. Rimfire rifle tactical stocks tend to be build for looks not function.
More info and online ordering at Blackhawk.
[ Usual disclaimer for linking to an online store ... I get no financial benefits from linking to Blackhawk ]
I try not to use words like “awesome” in the title for blog posts, so I substituted it with “game changing”. But don’t let that word change deceive you. I am *really* excited by this new stock coming out of Savage.
The Savage Accutrigger raised the bar on what consumers could realistically expect from a mass-produced factory trigger.Savage have brought custom-performance to factory-mass-produced stocks. They call it the AccuStock.
Savage explains the technology in their press release:
The AccuStock uses an aluminum spine and 3D Bedding Cradle molded into the stock in such a manner that it becomes an integral part of the composite stock.
The result is a polymer composite stock that possesses many of the same properties of high-end aftermarket stocks, bringing this high level of performance to the production rifle.
…
Rigidity – With its integral aluminum spine that runs from the action down the length of the forearm, the AccuStock is the most rigid factory polymer stock in the marketplace. No matter how hot the weather or the barrel, the forend stays rock-solid and the barrel remains free-floating.
Three-Dimensional Bedding Pressure – Pillar-bedded and v-block stocks, as good as they are, only apply bedding pressure on one axis, up and down. The AccuStock uses a wedge bolt to push the recoil lug back into the aluminum spine to prevent any movement forward and aft, while the bedding cradle literally squeezes the action from the sides when the action screws are tightened.
Initially two rifles will be available with the AccuStock:
Model 10 FCP
* AccuTrigger
* Proprietary Muzzle Brake (new from Savage)
* Detachable Box Magazine
* Oversized Bolt handle
* 24-inch heavy, fluted barrel
* Matte Finish
* Available in 308 Win. And 223 Rem.
* Left-hand models available
Model 10 FCP
Model 10 Precision Carbine
* Camo: Digital Green Camo
* 20-in medium-contour barrel
* AccuTrigger
* Detachable Box Magazine
* Oversized Bolt Handle
* Matte Black Metal Finish
* Available in 308 Win. and 223 Rem.
Model 10 Precision Carbine
No word on pricing. Unfortunately it is not yet offering rimfire models.
I read about Short Rifle Stock Systems (SRSS) new M14/M1A bullpup stock, the BullDog 762, at Defense Review. I suppose the designers said to themselves “just about about everything has a bullpup conversion, why not the M14?”
The stock comes in a synthetic model (SRSS-1421SM, $749) and an aluminum model (SRSS-1421BA, $999) and is available in Black, Olive Drab, Tan and Aluminum finish.
From the FAQ:
What does the SRSS kit consist of?
The SRSS stock system comes with main beam (stock) panels = Cheek rest and right panel, optics rail and all hardware, allen wrenches to mount scope rail which replaces the M14 /M1A hand guard. Simple tools like a screwdriver is all you need to install your M1A or the M-14 into the SRSS. OPTICS are not included. See our site for Optics available.
Do I need to machine any part of my rifle?
No. You will need to remove the hand guard and install the optics rail and you will need to remove the rear sight assembly, just hang on to it you may want to put it all back together or leave the SRSS together and build another M1A.
Can you describe the trigger action ? I understand that one of the weakness of bullpup stocks is their softness or lack of tactile feedback of the trigger when pulled.
Our trigger was designed to eliminate all the problems that bullpup’s have. The trigger/transfer rod is submerged in the stock and to some degree floats and is carried by the rear/original trigger. The safety is just above the pistol grip for your right hand and can be turned off and on by the right thumb. Our trigger rod adds 1/2 pound to whatever your trigger pressure is on your rifle. It feels like your original two stage trigger.
Later this year or next year SRSS will be offering this stock system for other rifles. My guess is that a Mini-14 model will be offered.
Fitted with the SRSS Mini Paladin Muzzle Brake ($200)
UPDATE: Daniel E. Watters, who is very knowledgeable, points out in the comments that there have been other bullpup stocks for the M14.
More photos after the jump. Continue Reading »
Bul handguns will be distributed in the US by Charles Daly. They are made in Israel. DoubleTapper has more information on their use with the Fobus stock in Israel (which is not likely to be offered to civilians in the US)
These photo were taken by TalonArms.com at SHOT Show 2008.
With Fobus stock.
Bul Cherokee
Custom, nice!
SIA are considering producing this stock adapter for the Enfield rifle.
Hi, welcome to The Firearm Blog! This blog is dedicated to all things firearm related. If you are into AR-15 and AK carbines, skeet shotguns, self defense pistols or hunting rifles then there will be something here for you. I hope you enjoy it.
I want this blog to appeal to a worldwide audience and so I will focus on firearms and shooting rather than country specific politics. There are already many great blogs defending your rights!
