This Ruger .45 my Dad left me is one of the first weapons I ever fired.

My grandparents had a farm in central Minnesota, near St. Cloud, and we would drive the two hours to visit every month or six weeks or so. Nearby was an old iron bridge, crosshatched with braces, bedded with wood that beginning to rot as the bridge neared the end of its first century of usefulness. The newer highway bridge went over the slow moving creek a couple of hundred yards upstream, so the metal bridge on the dirt road was relegated to cars and small trucks. It was too small for any modern farm machinery to pass across it.

But it was a great place to learn how to shoot. Dad would bring out his Ruger Mk1 .22 and this Blackhawk, and my three brothers and I would take turns shooting pop cans and empty ammo boxes floating in the river, tossed in on the upstream side of the bridge. Dad would occasionally take a turn with the .22, but he mainly used his .45, usually stoked with ACP ammo, since it was less expensive than Long Colt. It was also a way for him to see if we’d been fooling with his pistols in his absence, as he caught my younger brother once when he hadn’t put the ACP cylinder back in. Dad loaded a .45 ACP round, and it dropped deep into the LC cylinder. One look at the bunch of us, and he knew which brother was guilty.

When we exhausted the .22 ammo, we’d each get a cylinder full of .45 to shoot, or most of one, since five rounds each made the box come out even. It was harder to shoot well than the .22, and much louder (I don’t remember that we bothered with ear protection back then), but it was very satisfying to shoot it well and have Dad comment as much.

I miss him, and think of him whenever I shoot the old Ruger, or really, whenever I handle firearms in general. The interest I have in firearms now was sparked long ago by shooting with him.

Uberti's 1847 Walker Colt

A volunteer in the U.S. Army at the begining of the War in Mexico, another tall hero emerges from the Legendary Texas Rangers, Captain Samuel Walker. Experienced with the advantages of a repeating arm in combat, Walker teamed up with Samuel Colt in 1846 to develop what was to become the most sought after of the Hartford Model Colt percusion revolvers. As a Texas Ranger and Dragoon officer, Walker knew first hand that the early designs that Colt had produced were the key to an even more awesome light cavalry sidearm. The combined knowledge and experience of Walker and Colt brought out the first six-shot .44 caliber revolver, successfully arming a growing nation with a firearm it desprately needed and sealing the Army contracts that would pull Colt out of bankruptcy and secure his future. Captain Walker died in October of 1847 at the Battle of Juamantha, Mexico, but his legacy lives on in all Single Action revolvers and is honored with the Uberti Walker revolver, an exact and faithful reproduction of the original. ~from the Uberti Website

I fell for this hog-leg, when I first picked one up from a display at the Wairarapa Pistol & Sports Shooting Club- Trail's End 2004. The New Zealand Uberti agent, Neil Hayes, promises that every customer will go away smiling after firing one of these!

Certainly that has been my personal experience and that of every one I have loaned my Walker for a try.

There is always the appeal of the biggest, loudest and most powerful hand-howitzer that makes the red-blooded shooter just HAVE to fire that piece. The beauty of the Walker is that it won't leave you with torn thumb webbing, sprains or strains and medical bills! It WILL get folks peering into your bay to see what on earth you are shooting!

True to the original, The Walker has its faults- fortunatly the metallurgy is not one of them. The loading leaver does sometimes drop when firing, a problem corrected in the Dragons. I found that this can be fixed by dropping the charge back from 60 to 55 grains, but a simple fix for those who have to fire full house loads (and why would you buy a Walker if you weren't going to) is to tie it up with a short piece of leather thonging- no doubt as the Texas Rangers did.

The sights are basic,but that doesn't stop this shooting iron from delivering some grat groups- I have shot 2' groups at 25 yards, which is about as good as I can do with any non-target pistol. I evem manage to hit out 1/2 sized buffalo sillouette at 200 yards three times out of five- on a good day!

Wayne's Walker Colt

The Colt degign is a breeze to strip and clean. My method is to tap out the wedge, remove the nipples and place cylinder and nipples in a tin can with a little household detergent.

I then pour boiling water through the barrel and IMMEDIATELY spray liberally with WD-40- though the barrel and everywher else. Helps to have a rag to hold the hot steel!

The cylinders are scrubbed with a small bottle brush, then the water is drained and cylinder and nipples get the WD-40 treatment. Speed is the trick- rust sets in FAST.

From there it is wipe well and lubricate with a good quality oil, with a good quality grease on the arbor pin. Don't spare the cleaning cloth- it's cheap enough!

Four years later, My Walker still looks like new and it gets PLENTY of use.

This piece of history is available here in New Zealand for $595 NZ.

It is just too depressing for me to look up a US list price, so I will leave that to you!

Wayne Watson New Zealand

It sure does resemble its namesake

Its angular design and the fact that it fires from the bottom chamber, unlike most other revolvers, gives it an appearance that closely resembled the legendary Mateba Autorevolver. Having a barrel fire from the lower chamber is supposed to help tame recoil and reduce muzzle flip.

Specifications
Caliber	357 Mag.
Capacity	6 rounds
Barrel	2"
Rate of twist	1:18.5"
Weight	24 ounces

Gun Holsters and Gear spoke to the company and found out that they may be available stateside at the end of the year.

Mateba Model 6 Unica autorevolver. Production of this pistol has ceased.

UPDATE: Daniel points out below in the comments that the Rhino and Mateba were both designed by the same person, Mr Emilio Ghisoni.

From the Rhino Patent.

Steve has a write up about the shoot over at his website.

The .45 GAP (Glock Auto Pistol) was designed to duplicate the .45 ACP ballistics but in a shorter cartridge more suited to high capacity semi automatics. It is the last thing I would have thought of using in a revolver, but the owner of the wheelgun had some good reasons.

.40 S&W (left) and .45 GAP

He drew a Ruger .454 Casull revolver. There was no time to aim, barely time to squeeze the trigger. He’s not sure whether he got off two shots or three, but one proved fatal.

“Total luck shot,” he said.

“It doesn’t get any closer. He slid by me on his chin when I shot him,” Brush said. “I was backpedaling as fast as I could. I wasn’t even aiming. I tripped over my own feet as I pulled the trigger.”

He estimated that the animal weighed 900-plus pounds, and was 15 to 20 years old. It had grass packed in its molars and little fat on its bones.

“It was starving to death and saw an opportunity,” Brush said.

I sometimes get asked what should be carried in bear country. I always say the same thing: “I know nothing about bears but if I was in bear country I would want a .44 Magnum by my side”. I despair when people say they would rather carry their 9mm or .40 S&W Glock because they can get off more shots! This story perfectly illustrates that you may only get off one or two shots at a charging 900 pound beast! A 9mm round is not going to do much good.

Greg was most likely carrying a Ruger Super Redhawk. The Low-Glare Stainless model has a 7.5″ barrel and is available chambered in .454 Casull or .45 Colt. It has a MSRP of $992.

Big thank you to Don for emailing me the link.

UPDATE: Commenters point out that he was using the Super Redhawk Alaskan. This snub nosed .454 Casull has a 2.5″ barrel . It also has a MSRP of $922. Thanks guys for the correction.

Tom Gresham has an interview with Greg on his Gun Talk show. Thanks to Jake for the link.

It was build by Ryszard Tobys and was modeled after the Remington Model 1859 revolver. It is 28mm in caliber (1.1″)!

Thanks to Sven for the link.

Hat Tip: Weapons Blog

UPDATE: Added corrected information and photos. Thanks pauloos for the link.

Model 642


Model 442

Smith & Wesson have developed a Banger’s exclusive Model 627 chambered in .38 Super. I really love the stainless glass bead finish along with the short black cylinder.

The reason for the big gap between the cylinder and the frame is because the original Model 27 was designed to chamber the .357 Magnum cartridge. A .38 Super case is about 30% shorter than a .357 Magnum case, hence the gap.

Specs:

Capacity: 8 Rounds (Same as the .357 Magnum models)
Action: Single/Double Action
Barrel Length: 5 1/2″ Angled
Front Sight: Patridge
Rear Sight: Adjustable
Weight: 45.5 oz.
Material: Stainless Steel Frame and Cylinder
MSRP: I am not sure. Ask you local gun dealer to call Bangers about pricing.

.38 Super is a slightly weaker round than the .357 Magnum. Its advantage lies in the fact that it has just enough power to be classified as a Major cartridge in IPSC competitions. I know it is very popular among semi-auto IPSC competitors but I am not sure how popular it is with the revolver crowd. Caleb and Tam, do you know how?

Hat Tip: Gun Holsters and Gear

Ruger SASS Vaquero

The new revolver features a high-gloss stainless steel finish, the lower and wider hammer from the Ruger Montado and SASS markings. It is chambered in .357 Magnum and has a 4.62″ barrel. MSRP is $1459 (that is for a pair of revolvers) and will be available in August.

More info available at Ruger.

There are at least five bullets stuck in that revolver barrel. RugerForum members seem to think is a Ruger Blackhawk in .357 Magnum. The squib loads could have been low powered .38 Special rounds or very badly loaded .357 rounds. That the shooter did not notice it after the 1st, 2nd, 3rd or 4th round is crazy!

It is hard to see if there is a bulge in that barrel, a symptom of a round fired into a blocked barrel. I think if had been a semi-automatic pistol there would have been a disaster. A revolver can vent gas in the gap between the cylinder and the barrel but in a autoloader pistol for a brief period of time the gas has no where to go and the pressure build up would be considerable.

A few weeks ago I was shooting some old .22 Longs out of a rifle which I had not fired them out of before. I nearly crapped my pants after the second round when I realized to forget to check the spotting scope to ensure that the first round made it out of the barrel and hit the target. I was shooting iron sights and could not see the target. I learnt a good lesson. Always make sure you hit the target, especially when you are shooting low powered ammunition.

Thanks to Advocate for the link.

Charter Arms have issued a press released saying that they are manufacturing at capacity and cannot produce enough of their existing guns and will not introduce another gun until demand dies down.

Let’s be clear about what Charter Arms wanted to do initially. Needless to say, not producing the CARR this was NOT the plan when we first announced the new revolver. The 2008 election created this panic. Had the election results been different, firearm and ammunition demand and sales would not have exploded, and the new Charter Arms CARR revolvers would be in stores right now.

Bottom line, the CARR is not vaporware, there is simply no room in Charter Arm’s production line for new items. Additionally, Charter has several other new guns and models in addition to the CARR series, and those guns we won’t even discuss until things get back to normal.

I am not sure to be skeptical or not. The pistol was supposed to be on display at SHOT Show earlier this year. After SHOT the excuse given was patent problems. It was supposed to be on display at the NRA show, but again it was a no-show. They have since pulled all links on their website pointing to the Rimless Revolver page. Maybe they are legitimately worried about production, but refusing to even discuss the pistol seems like bad public relations to me.

Full press release is at AmmoLand.com

The 4″ barreled gun will be available chambered in .44 Magnum or .44 Special. A very nice look piece and with enough power to keep hungry bears at bay!

More info.

Emiliano Zapata Salazar is a revered Mexican hero. He formed and led the Liberation Army of the South during the 1910 Mexican revolution until 1919, when he was killed in an ambush.
TALO has a history of commemorating both US and Mexican statesmen and heros. The previous TALO Special edition Ruger Vaquero was a commemorative John Wayne revolver.

Unfortunately the opening bid at gun broker is $2500! How many AR-15 lowers can you get for that?

Click to expand the images.

It features:

* Lifetime warrantee
* Exclusive eight-groove gas sealing barrel,
* Exclusive three-point cylinder lock up, no screw side plates,
* Hammer block safety system
* Charter’s fastest factory revolver-lock time.

Specs:

Cartridge: .38 Special + P
Barrel length: 2″ stainless steel
Frame: 7075 aluminum alloy
Capacity: 5 round
Weight: 12 ounces

The MSRP is $400.

This photo is from Visier Special 6, 1997 (special edition of one of the three big German gun journals):

Click to expand.

Revolvers cannot be effectively suppressed because gas escapes from between the cylinder and the barrel creating noise (there are some exceptions). The big shell that encloses the cylinder of the PSDR 3 prevents the gas from escaping. This combined with a big suppressor and a subsonic .45 ACP round causes a noise reduction from 136 dB to 90 dB which is comparable to a CO2 air gun. Decibels are a logarithmic unit of measurement, so a 46 dB reduction is significant. In theory this gun should make a lot less noise than a suppressed semi-automatic pistol because there no slide slamming open and closed.

I had no idea such a gun existed until Sven emailed me. I really like the idea – German engineering at its best!
Many thanks to Sven, who blog at Defense and Freedom, for the scanned page and translation.

Even through I posted that impressive video of a guy being shot point blank with a .44 Magnum and .308 Win., I am still amazed at what little effect on the target the bullet has when it impacts a ballistic vest. Sure, I do understand the physics, but still!

More videos of people being shot by Miguel are here.

Someone from Bulletproofjackets.net posted the info about Miguel Caballero. Thanks.

Due to our pushing to get the patent applied for and all of that paperwork submitted and the various legal tap dancing involved in having real guns ready for release at SHOT we were rushed.

We hope you understand. Probably the next opportunity to get it in the hands of everyone will be the NRA Convention in May. However, we will continue to work the legalistic patent process and plan (hope) to have the .40 ready for media test and evaluation in April followed very soon afterwards with production guns.

Read the full press release at AmmoLand.

More about the Charter Arms Rimless Revolver here.

It can only take 2.5″ .410 shells unlike some of the newer Judge models which can chamber 3″ shells. It also features a reduced profile hammer.

Photo from casa-z

Two models are available. A lighter model with a titanium frame (see photo) and a standard model with a blued steel frame.

Specs:

Capacity: 5 rounds
Cartridge: .45 Colt and .410 2.5″ shells.
Sights: fiber optic front sight and fixed rear sights.
Action: SA / DA.
Grip: Taurus Ribber
Cylinder: Steel or Titanium.

Ruger LCR. Click to expand.

The revolver features:

* Double Action
* Polymer fire-control housing
* Aluminum frame with black “synergistic” hard coating
* Fluted stainless steel cylinder, lightweight and compact.
* 5 Rounds in the cylinder
* Replaceable front sight.U-notch rear sight.
* The fire control system has been designed with a friction reducing cam that allows a very smooth trigger pull.
* The internal lock has been designed so it will not interfere with the fire control components.

The Specs:

Caliber: .38 SPL+P
Capacity: 5 Rounds
Finish: Matte Black/Target Grey
Grip: Hogue Tamer w/ Sorborthane Insert
Barrel Length: 1.875″
Groove: 6
Twist: 1:16″ RH
Overall Length: 6.50″
Weight: 13.5 oz.
Front Sight(s): Replaceable, Pinned Ramp Front
Rear Sight(s): Integral U-Notch

The standard model has a recommended retail price of $525.

Ruger are also simultaneously releasing a model with Crimson Trace Lasergrips. It has MSRP of $792.

Ruger LCR-LG. Click to expand

GunBlast have already reviewed the LCR and were impressed (thanks to cmblake6 for the link):

The trigger pull on the LCR is very smooth, and very light for a pocket revolver. Many pocket revolvers have dreadful trigger pulls, and I get a lot of email from readers who buy a gun for defense, and have a very hard time pulling the trigger. If the production LCRs are like the one that I shot, the trigger pull problem is solved. That gun had what could be called a perfect trigger pull for a pocket revolver; a smooth and light double action. I do not know the pull weight of the LCR, but will measure such things when a production gun arrives.

I will update this post as more information arrives.

UPDATE: More info from Ruger

Friction Reducing Cam. Patent pending.

Fire Control Housing. Patent Pending.

There are a total of three new pending patents. Not bad for a wheel gun!

UPDATE: Holster compatibility:

* Blackhawk Inside Pocket – Size 4
* Black Hawk Inside Pant – Size 0
* Fobus TA85 (Standard)
* Fobus RU101 (Evolution)
* Uncle Mike’s Inside Pant – Size 0

UPDATE: The Ruger LCR will be available 1st March 2009

UPDATE: A video

The press release is after the jump.
The full press release

Sturm, Ruger & Company, Inc. (NYSE-RGR) is pleased to announce the new Ruger Lightweight Compact Revolver (LCR), an evolution in revolver design. The 13.5 ounce, small frame, 5-shot LCR has three main components: a polymer fire control housing, an aircraft quality aluminum monolithic frame, and an extensively fluted stainless steel cylinder. The Ruger LCR represents one of the most significant new revolver designs in over a century, with three patent applications pending.

The LCR’s lightweight, chemical-resistant polymer fire control housing contains the entire fire control mechanism. Because the fire control components are located within this single housing, their dimensional relationship can be held much more closely than if divided between traditional grip frames and cylinder frames. The end result is that the fire control components are assembled with no hand fitting, resulting in a highly consistent product at an affordable price.

The long-fiber, glass-filled polymer fire control housing provides a reduction in perceived recoil. The fire control housing’s grip peg allows for a variety of grips to be installed, and the LCR’s standard Hogue® Tamer™ grip with Sorbothane® insert reduces perceived recoil even further. A joint effort with Hogue, the LCR’s standard grip was designed using US military anthropomorphic data on hand shape, so the LCR can be comfortably held by a broad spectrum of hand sizes. An available Crimson Trace® Lasergrip® offers the advantages of a laser sighting system.

The LCR’s monolithic frame is an aerospace grade, 7000 series aluminum forging treated with a black synergistic hard coat that is applied after machining. Successfully tested with over 30 different aggressive chemicals, this synergistic hard coat exceeds mil-spec salt spray tests, and offers performance considerably greater than hard coat anodizing. The monolithic frame provides sturdy, rigid support for the cylinder and the barrel. The 1-7/8″ long barrel, with a 1:16 twist, is made of 17-4 PH aerospace grade stainless steel, chosen for its strength and dimensional stability during machining and heat treatment.

The extensively fluted 400 series stainless steel cylinder is lightweight and compact, measuring only 1.283″ in diameter in the chamber area. Treated to an advanced form of Ruger’s Target Grey® finish, this stainless steel cylinder is strong, durable and designed to handle .38 Special +P loads. The Ruger LCR’s patent pending cylinder front latching system uses titanium components, optimized spring tension, and enhanced lockup geometry to ensure that the LCR’s cylinder stays locked in place during firing.

The LCR’s double-action-only trigger pull is uniquely engineered to minimize friction between the fire control components. This friction-reducing cam fire control system results in a non-stacking, smooth trigger pull. The LCR’s trigger pull force builds more gradually, and peaks later in the trigger stroke, resulting in a trigger pull that feels much lighter than it actually is, while still providing positive ignition of all primers. This results in more controllable shooting, even among those with smaller, weaker hands who find traditional DAO triggers difficult to operate.

The sights are replaceable ramp front, and a fixed U-notch rear. An internal lock, unobtrusively hidden under the grip, does not interfere with the fire control mechanism in any way when disengaged.

This combination of cartridges could be quite beneficial to the budget conscious shooter (ie. every shooter). The cheaper .40 S&W would make a good practice round instead of the hot 10mm which could then be used as the primary carry round.

The revolver features XS Standard Dot Tritium Sights and a Pachmayr grip.

Specs:

Capacity: 6 Rounds
Action: Single/Double Action
Barrel Length: 2 3/4″
Front Sight: XS® Sight 24/7 Standard Dot Tritium Sights
Rear Sight: Cylinder & Slide Extreme Duty Fixed
Overall Length: 7 5/8″
Weight Empty: 28 oz.
Grip: Pachmayr® Compac Custom
Material: Scandium Alloy Frame/Stainless PVD Cylinder
Finish: Matte Black

MSRP: $1153

Hat Tip: The High Road and Guns Holsters and Gear

They feature a classic thumb piece, wide spur hammer and wide serrated target trigger. All chamber 6 rounds, are single/double action and have a red pinned front sight and micro adjustable rear sight.

Two finishes are available: blue and nickel and each finish comes with a 4″ or 6″ barrel.

Click to expand the images.

6″ Blue. MSRP: $1,074.00

6″ Nickel. MSRP: $1130. Shiny

The .327 Federal Magnum cartridge, which was announced just over a year ago (Nov 2007), was specifically designed to offer .357 Magnum performance in a 6 shot compact revolver although it does not deliver this.

This pro-series model features a full length extractor rod, powerport with expansion chamber and full lug barrel.

Capacity: 6 Rounds
Action: Single/Double Action
Barrel Length: 3″ Full Lug
Front Sight: Pinned Serrated Ramp
Rear Sight: S&W Adjustable
Overall Length: 7 1/2″
Weight Empty: 24.5 oz.
Grip: Synthetic
Material: Stainless Steel Frame and Cylinder
Finish: Matte Black

MSRP $980

Specs:

Capacity: 6 Rounds
Action: Single/Double Action
Barrel Length: 2 1/2″
Front Sight: XS® Sight 24/7 Standard Dot Tritium Sights
Rear Sight: Cylinder & Slide Extreme Duty Fixed
Overall Length: 7 3/4″
Weight Empty: 29.7 oz.
Grip: Pachmayr® Compac Custom
Material: Scandium Alloy Frame/Stainless PVD Cylinder
Finish: Matte Black

There is not much information out there but they will be available in 2009 for an MSRP of $899. Calibers offered will be .357 Magnum, .41 Short Magnum and .44 Magnum. Customers will be able to choose from six colors: Coyote Tan, Sage Green, Forest Green, Federal Brown, Sniper Grey and Black Graphite.

Hat Tip: CASCity

I personally use the following terminology:

A revolver: revolver
A single-shot: pistol
A Derringer: Derringer
An Autoloader: pistol (unless it is also a revolver. I would call that an automatic revolver)
A Matchlock: pistol
A fully-automatic handgun: machine pistol (if it was specifically designed to he held like a pistol, otherwise it is a submachine gun)
A handheld cannon: handheld cannon, hand cannon or Handgonne

The futuristic looking Mateba Auto Revolver (from Wikipedia)


Chinese Hand cannon (from Wikipedia)

Click to expand.

To complete the mid-1800’s look they have included a fake reloading. It has a 4″ octagonal barrel and weights 8.6 oz. The MSRP for the standard model will be $289. A model with a .22 Long Rifle cylinder will cost $324.

More info at NAA.

Problem: The major drawback to rimless semi-auto cartridges in revolvers is they require specially made revolvers. These low-production, somewhat scarce and, highly-specialized revolvers are limited to sometimes fragile and expensive moon/half moon ammunition clips. Generally, only revolver aficionados and collectors bother with (.45ACP and 9mm Parabellum) rimless revolvers. While they may sometimes be fired without the specialized moon clips, generally the ejector rod will not eject the free-floating fired cases (got a pencil?).

Solution: Charter Arms has come up with an affordable revolver that chambers rimless semi-auto rounds in the same manner as a standard rimmed-cartridge revolver.

The first caliber on offer will be .40 S&W which will be followed by .45 ACP 3-4 months later and 9mm Parabellum (that will also be able to chamber .380 ACP) 3-4 months after that. All will be able to handle +P ammunition.

Initially only snubnosed models will be produced (2″ barrel for 9mm and 2.2″ barrel for .40 and .45ACP).

The MSRPs are:
9mm: $399
.40 S&W: $449
.45 ACP: $449

Although revolvers that fire rimless cartridges are not new, I am sure these will sell well. I think quite a few auto pistol owners but may balk at the thought of having to stock up on revolver caliber ammunition, but would be tempted by a revolver that chambers their favorite pistol cartridge.

Hat Tip: Ammoland

4 5/8″ model.

Hat Tip: Outdoor Wire

“I wouldn’t bet my life on it, but if somebody was taking bets, I would bet that in the year 2009, Ruger might come out with one of those [the SP101] in .38 Special, +P rated in an aluminum frame…”

If they do release it then they will probably aim to do so at SHOT Show 2009 in January.

Ruger SP101 in .327 Federal Magnum

What a great photo Full sized version here.

This revolver is at least 50 years old. As James pointed out, it will still be useful in another 50 years time. My great-grandfathers rifles are still floating around my family. This is one of the things I love about firearms. When you buy one you know it will outlive yourself if you look after it. Compared to ipods ( I have bought two ipods in the last 3-4 years and am about to purchase a third), cell phones, cars etc. firearms are really cheap when you consider how long they last.

More here.

.357 Magnum Hair Dryer … more like a 20mm Vulcan hair dryer with a bore that size

More here.

H/T: DesignerMode

The Smith & Wesson Model 442 will be laser engraved with an insignia to commemorate the ruling by the Supreme Court. On the right side plate of the revolver, the scale of justice is depicted with the wording “D.C. vs. Heller” across the scale. The balance is in favor of the “Heller” name with the court date of “June 26, 2008″ positioned across the top. Underneath the scale, the side plate reads “Second Amendment” and “The right to keep and bear arms” in white lettering.

S&W Model 442 (the regular version)

UPDATE: GunTalk has photos of the Second Amendment Foundation model. Very cool.

He said the Colt Cobra revolver used by Jack Ruby to kill Oswald in 1963, just days after Oswald was arrested for assassinating Kennedy, could fetch several million dollars alone. The initials of detectives who handled the gun are scratched on it.

Personally I would not want to own a murder weapon, be it a gun, knife, stick etc.

1873 Cattleman Charcoal OM (not the revolver mentioned above)

Press releases below:

Uberti Introduces Engraved Cattleman in Limited Edition!

For 2008, Uberti is offering a uniquely engraved Cattleman in .45 Colt-caliber. Engraved single-action army revolvers, highly valued by shooters and collectors alike, are now available, new in the box, directly from the Uberti factory. These limited edition guns will only be produced in 2008.

Engraved single-action army revolvers were most often produced for presentation or as gifts to high-ranking military and government officials, presidents and other heads of state.

Uberti is offering the engraved Cattleman in three distinct versions, all of which are New Model (NM) all-steel Cattleman revolvers. The first version comes in a white finish, adorned with liberal and attractive scroll engraving and sports a hand-selected, AAA-Grade one-piece walnut grip. The second scroll-engraved version comes with a coin-finished frame, blued-barrel and black one-piece bison horn-style grip. The third scroll engraved version is finished in full silver plating and sports a one-piece, pearl-style grip. All versions are available with either a 4 ¾- or 5 ½-inch barrel.

Uberti Introduces Matched Two-Gun Sets in Limited Edition!

For 2008, Uberti is offering the Cattleman in matching .45 Colt-caliber two-gun sets. Destined to be a must-have among cowboy action shooters, Uberti’s matched Cattleman sets will also be treasured by collectors. Matched single-action army revolvers, often sought-after and rarely found, are now available, new in the box. These limited edition sets come directly from the Uberti factory and will only be produced in 2008.

Historically, matched sets of single-action army revolvers were most often presented to high-ranking military and government officials, presidents and other heads of state. Now, with Uberti’s latest offering, you too can own a prestigious pair of guns with this limited-edition offer. The matched sets share the same serial number, but are distinguished from each other by an R or an L preceding the serial number.

Uberti offers the matched Cattleman sets in four different versions, all of which are New Model (NM) steel Cattleman revolvers. Two versions come in standard blued finish with color case hardened frames and a one piece walnut grip-one with 4 ¾-inch barrel and one with a 5 ½-inch barrel. A third version, which according to historians was favored by non-other than lawman Bat Masterson, features a nickel finish, one-piece ivory-style grip and a 5 ½-inch barrel. The fourth version sports a matte-finish, checkered, one-piece walnut grip, and comes with a 4 ¾-inch barrel.

There are very few examples of these revolvers known. I know of only two others reported in print. Note the distinctive hammer and grip. Seven shot cylinder, Birmingham proof marks, nickle plated brass frame and butcap. A rare revolver.

Two of these revolvers were reported by W.C. Dowell in his book, THE WEBLEY STORY. See also pages 43 and 45 of WEBLEY REVOLVERS by Bruce and Reinhart. These are the only examples I know of.

From 1864 to 1866 Webley had a licencing agreement with Smith & Wesson to make .22 tip-up revolvers. However, I believe this revolver pre-dates that agreement and thus Webley did not want to be known as the maker. Although the workmanship appears to be excellent.

On page 45 of Webley Revolvers, there is a photo of an almost identical revolver to this one. The revolver pictured is serial number 4 with a silver plated frame. Also mentioned in the text is serial number 2 which was reported by Dowel as having a gold plated frame. Due to corrosion of the front of the cylinder and the face of the barrel, the numbers on this revolver are no longer visible, if it ever had any numbers at all.

Like the two revolvers mentioned in the above books, this revolver has Birmingham proof house markings and nothing else. The lack of Webley markings may indicate that this was made before the licencing agreement was obtained. After the licence was granted, Webley produced several different single action models, some of which resembled Smith and Wesson rim fire revolvers and some did not. Webley soon dropped single action pocket pistols in favor of his successful line of double action Bull Dogs. All of the early single action rim fire revolvers are extremely scarce.

It is important, when firing a revolver, to keep all parts of your hand(s) away from the front of the cylinder. Explosive ignition gases exit the cylinder gap as well as the muzzle of the firearm when the cartridge is fired. This safety issue is sometimes illustrated by instructors who place a revolver inside a paper bag with the muzzle sticking out a hole in the bottom.

Xavier has also posted the photo of the thumb itself. It is not pretty.

More here.

Fishergirl Survival Rod & Kit

The fishergirl range complements pink guns such as the .38 ‘Pink Lady’ revolver.

Charter Arms Pink Lady

Press release:

Smith & Wesson introduces the Night Guard Series, chambered in .45 ACP, .44 Mag./.44 S&W Special, .357 S&W Magnum/.38 S&W Special and .44 Special. With 2 1/2″ barrels, the revolvers feature a matte-black, lightweight Scandium frame; black stainless PVD (physical vapor deposition) cylinder; Pachmayr Compac Custom grip; XS 24/7 Standard Dot Tritium front sight; and the new Cylinder & Slide Extreme Duty fixed rear sight. The Night Guard revolvers will available in March 2008.

Black Slide Ruger SR9 Pistol

I like the look but prefer the stainless.

The recently launched Ruger SR9â„¢ pistol, the first striker-fired pistol from Ruger, is now available with a blackened stainless slide. The multi-step blackening process improves both the durability and corrosion resistance of the stainless steel slide by creating a surface hardness of 68Rc. The extra hard finish also reduces scratching and holster wear.

Super Redhawk in .480 Ruger

Ruger has finally sorted out the problems they were having with the Redhawk .480

The Ruger Super Redhawk revolver chambered in .480 Ruger, specifically designed with the big game sportsman in mind, is back. Production had been suspended early in 2007 to address a fired case extraction issue. After a complete analysis, it was determined that to provide easy and sure extraction, all .480 Ruger Super Redhawk Revolvers, including the easy-to carry Alaskan, will now feature 5-shot cylinders. Beginning in 2008, they will also feature a Hogue® Monogrip® for added comfort. The Target Grey® All-Weather® version adds a low glare matte finish preferred by hunters.

The .480 Ruger cartridge offers handgun hunting performance without the heavy recoil experienced by other big game calibers. This cartridge offers power without excessively heavy recoil using Hornady’s .475″ diameter, 325 grain XTP Magnum bullet. The .480 Ruger cartridge can produce a muzzle velocity of 1350 fps – nearly one-third more muzzle energy than the standard .44 Magnum cartridge, with substantially less recoil than the other big bore hunting handgun cartridges. This exciting cartridge developed by Hornady can be said to effectively “split the difference” between the powerful .44 Magnum and other super-powerful, heavier recoiling hunting cartridges.

M77 chambered in Ruger Compact Magnums

I could be wrong but I think this is the first rifle to be chambered in the new RCM cartridges.

The Ruger Compact Magnum cartridges, developed in conjunction with Hornady Manufacturing Co., are extreme cartridges for extreme hunting. Based on the beltless .375 Ruger, the .300 and .338 RCMs are engineered to offer .300 and .338 Win. Magnum performance in a more compact package. With their short actions and 20″ barrels, the M77 Ruger Compact Magnums are today’s “mountain rifles and brush guns.”

The new cartridges are chambered in the compact action Ruger M77 Hawkeye rifles with features that include the smooth and crisp Ruger LC6â„¢ trigger for improved out-of-the-box trigger pull, and a red rubber recoil pad that provides more effective recoil reduction. Other features of the Ruger M77 Hawkeye rifles appreciated by knowledgeable shooters are the Mauser-type controlled feeding and powerful claw extractor, 3-position safety, hammer forged steel barrels and free Ruger patented scope rings. The design of the patented steel floorplate, which bears the distinctive Ruger logo, provides easy unloading and eliminates accidental “dumping” of ammunition.

Two compact-action models of the Ruger M77 Hawkeye rifles chambered in the new Ruger Compact Magnums are available. The matte blued version features the M77 Hawkeye’s slimmer walnut stock with wrap-around cut checkering on the forearm and more rounded contours on the bottom of the stock and top of the pistol grips. The matte stainless version features a synthetic stock with a new recoil pad.

The new cartridges designed by Hornady Manufacturing provide unmatched ballistic performance in compact rifles, less felt recoil, longer barrel life, and superior performance at all temperatures. The .300 RCM is available in 150, 165 and 180-grain SST offerings. Each .300 RCM load exceeds comparative .300 Win. Magnum loads from a 20″ barrel. Muzzle velocities for the .300 RCM are 3,170 fps, 3,030 fps, and 2,900 fps, respectively – from a 20″ factory barrel. The .338 RCM is available in the newly developed 200 gr SST, and 225 gr SST offerings. Velocities for the .338 RCMs are 2,850 fps and 2,710 fps respectively, easily out performing the .338 Win. Magnum at equal barrel length.

This is just a screenshot. Click here to see the actual animation.

“He learned to use all types of firearms and spent many hours on target practice. Marksmenship might someday mean saving his own life and the lives of other people.”

Watch it here.

I love watching IPSC wheel gun competitors doing their thing!