The Firearm Blog

[ I am pleased to present this guest post written by Jonathan Sun. ]

A couple weekends ago, I participated in the Bullets and Vehicles course at Sig Sauer Academy in Epping, NH. I wanted to share my experiences during this course for those who might be interested in training there, or firearms training in general.

My Background

I’ve had an interest in firearms since my teenage years, thanks to my father. Only more recently, I would say the last 4-5 years did my interest in training or competing grow. Training began with Sig Sauer Academy (formerly SigArms Academy). The impetus was that my first handgun was a Sig P229R and the facility was close enough where I thought trying out some of their training wouldn’t cost an arm and a leg. I’m not LE/MIL or a HSLD type, so this type of training is more academic in the sense that it would be something nice to know in case stuff hits the proverbial fan. Previous classes I had taken were:

• Basic Practical Handgun Skills
• Intermediate Handgun Skills
• Intermediate Concealed Carry
• Low Light Pistol Operator
• Close Quarters Pistol Operator
• Advanced Concealed Carry
• Basic Law and Threat Management

This path was recommended to me, while not being a new shooter, it definitely did help fine tune existing fundamentals and reinforce training techniques that they use at Sig. The Bullets and Vehicles course was designed to help expose myths surrounding how bullets behave around vehicles and to help give you a better chance at surviving a confrontation at or around a vehicle.

Morning Drills

This was an 8 hour 1 day course that started at 8:30A. It began with an in classroom meeting to go over the safety guidelines and introduce ourselves to the instructors. There were approximately 8 of us plus 3 visitors from South Korea. Two of the visitors worked for a South Korean gun magazine and the third was a South Korean SWAT member. From there we moved to the indoor range staging area and prepared to gear up. Those who did not have equipment were issued equipment from the armory. After equipping we proceeded to the outdoor range.

The drills began dry and as always the emphasis was on safety. The main thing we had to consider while doing these drills was drawing and not lasering ourselves and our neighbor ahead/behind/or to either side of us. The instructors had us run it dry from seated positions while simulating being seated in a vehicle. After they were confident that we moved on to live shooting drills.

Afternoon Drills

When we returned to class, the instructor, I’ll as SK, showed us a diagram explaining the tendency a bullet will have when shot into or out of a windshield. I say tendency because they emphasized that bullets around vehicles are extremely unpredictable and that the best chance you have is to understand how they tend to behave around them. Essentially when the bullet impacts the windshield, the portion of the bullet that impacts the windshield first, that is the direction the bullet will tend to travel. In the case of shooting outwards the bullet will tend to deflect upward and shooting into a vehicle it will tend to deflect downward. After class we moved to the donor Taurus sitting on the far right of the range. SK demonstrated a way to use the car antenna, assuming the older style wire antenna, as an improvised glass breaker and several dedicated pocket knife like breakers/seatbelt cutters.

Fighting from the Vehicle

We took turns taking shots through the windshield from the front passenger seat into a target downrange. The goal of this exercise was to show the angle and degree of deflection once the bullet impacts the windshield. Basically, the amount of deflection in this case, with 9mm and the Taurus windshield, was approximately 7-8 inches. The target we were shooting at was about 5 feet away from the front of the vehicle. About 50-60% of the 9mm rounds exited and struck the target, the other 40-50% of the time, the bullet fragmented before exiting, with small pieces striking the target unpredictably.

The second drill during this phase, they had is sit in the driver’s seat, drawing without lasering ourselves and engage targets from the driver’s side window. Simulating or enhancing stress they had an instructor jumping up and down in the door jamb of the rear passenger side to make aiming more difficult. The big thing they wanted us to take away from shooting within the vehicle was that it was not a great place to be if you needed to engage a threat, and you should make your way out of the vehicle to better cover.

Vehicle as Cover

When using the vehicle for cover, they wanted to emphasize not crowding the vehicle. Crowding the vehicle can make you more likely to get hit from ricochets over the top of the hood or trunk. They had us attempt it, and quite to my surprise it was not difficult to get skipped bullets on target within 1-2 shots. The amount of deflection from the skipped bullets was such that, if you were using a hood/trunk for cover and were sucked up against it, you would very likely get hit if you took a peek. If you were farther away from the vehicle the chance the bullets would deflect over your head increases. The other suggestion besides the obvious engine block was to use the wheels/wheel wells. The thought process behind this being that you had a steel or aluminum wheel and behind that the disc brakes as some intermediate cover. To simulate this, they had us take turns engaging a steel target, while laying prone from underneath the vehicle.

From a Moving Vehicle

We then proceeded to engage multiple targets while in a moving vehicle. SK drove his Tundra diagonally across the outdoor range and had students take turns sitting in the passenger seat engaging multiple stationary targets while the vehicle was in motion. The point of these exercises was that it is not a great situation to be in and that the best case scenario is that any amount of ammo you’re sending downrange will at least keep heads down if you’re unable to neutralize the threat.

Various Calibers

For the last part of the range exercise, they had us engage the vehicle with various calibers to see how effective/ineffective each round was. We tried .22, 9mm, .40S&W, .45ACP,.357Mag,.44Mag,.223,.308,.338Lapua and finally .50cal. The results were such that someone reasonably armed for CCW, 9mm appeared to be the most well rounded for usage around a vehicle. The interesting to note, the .40S&W (what I shoot) and .45ACP were poor at traveling through the windshield, they tended to fragment catastrophically. They also tended not to travel through the vehicle, when shot door to door. The lack of over travel may or may not be something you may want depending on whether the threat is inside/outside of the vehicle.

Concluding

This class was as engaging as any other of their classes, possibly more so due to the amount of myths and conjecture about how bullets will behave around vehicles. The instructors are extremely attentive and knowledgeable. While being experienced, they have a demeanor that makes it easy to ask questions and they invite it. The facilities have reactive plates so you’ll get immediate feedback when you’re on target or not, which is great for tuning or fine tuning your training. The round count for the class was just under 300, which is about average for a one day class. I highly recommend professional firearms training for anyone, regardless of where it may be, as there are a lot of things to consider that you might not realize if you plan on CCW.

If you have any questions for me or about any of the courses above, please feel free to email me, or ask in the comments below.

Contact Info for:

SIG SAUER Academy
233 Exeter Road
Epping, NH 03042
Phone: 603-679-2003
Fax: 603-679-1639
Email: sigsaueracademy@sigsauer.com
Web: www.sigsaueracademy.com

San Diego Reader has published a very well written article about open carry in California, which is legal as long as the gun is unloaded. The author, Rosa Jurjevics, who had never fired a gun let alone carried openly, met up with a few open carry enthusiast at a boardwalk at Pacific Beach. After giving her a lesson on the legalities of OC and how to deal with the police, they handed her a Ruger Single Six.

Kudos to the Rosa for writing an article that did not portray those who open carry as extremists or agitators, but simply as a group of people who choose to exercise their legal right to carry openly, and who hope that their constitutional right to carry will be recognized in the future.

Hat Tip: Say Uncle

James has written a post about five very interesting, but ultimately useless handguns. Very funny to see what some people thought were good ideas.

The HDH: Greater capacity than a Glock 17

Mike has started up a new forum focusing on sub-compact / micro / mouse guns. If you are into these guns check out Microguns.net

Joe Huffman has done a lot of research into microstamping. It is very interesting and has many photos.

More here.

Hat Tip: Say Uncle

This is what I want for Christmas

F636HT Heavy Duty Long Gun & Handgun System

This combination of features gives you an extremely active tank that has no dead or hot spots resulting in maximum cleaning capability for heavy duty use. This technology allows the user to clean and lubricate the field-stripped only firearms rapdily without using hazardous solvents or oils. Night sights, rubber grips and plastic frames are not affected by the process.

Gun capacity: [referring to the F636HT Heavy Duty Long Gun & Handgun System pictured above] Long gun system will fit up to 10 handguns or 4 long gun parts up to 35.5″ long. Great system for the gunshop gunsmiths or shooting ranges, law enforcement agencies and U.S. Armed Forces. Will clean/lube everything from derringers to belt fed MG’s.

Features: Enough adjustable heat for parkerizing & some bluing, extended rear flange for rack or lube pan, adjustable power and is ported for optional filtration system! Has two weapon racks and lube pan rack drip holder. Optional rolling stand and multi tank set ups available. Optional half-sized accessories allow simultaneous cleaning and lubrication for smaller parts.

And the cost …. $7100. For that price they should be able to handle wood as well!

More info here.

Hat Tip: gonzaleznj @ MP.net

If you want to start your day with a egged shaped gun, or if you already have the M1911 tequila bottle then this is for you.

Personally I prefer my eggs roundish…

A new safety trigger for the Glock has been launched by American Tactical Imports

From the press release

SIDERLOCK® from American Tactical Imports is a security trigger designed for GLOCK® pistols which replaces the original trigger to offer a safer and more secure blockade of the firing action.

The concept is simple; with a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger whereby avoiding an accidental discharge of the weapon. SIDERLOCK® behaves exactly as the original GLOCK® trigger when it is in the fire position all the while maintaining the original manufacturer specifications and its immediate availability of shot.

Having not seen one I cannot comment on how useful it would be. I just hope no one will draw a Glock in self defense only to have the trigger jam!
American Tactical Imports will be displaying it at SHOT Show this year.