The Firearm Blog

The Beretta ARX 160 is the new assault rifle being adopted the the Italians. I first mentioned it on in blog post last October and now thanks to REMOV I have the specs and some detailed photos (copyright Armi e Tiro/Beretta). According to REMOV the R&D cost 4 million euros, 70,000 man hours and 500,000 rounds of ammunition for testing!

Click to expand the photos.

GLX 160 grenade launcher attached.

The weapon has been designed to be modular and easy to maintain in the field. It has an upper/lower polymer receiver, much like the AR-15, a gas piston system and a rotating bolt. An interesting feature, for an assault rifle, is the ultra-quick change barrel system. Beretta claim barrels can be swapped in two seconds without tools by simply depressing two latches in the upper receiver! Quad Picatinny rails allow for accessories to be attached.

Ergonomics have been an important design goal in the development of this rifle. To this end the ejection and charging handle can be switched from one side to the other in no longer than a minute. All selector switches and buttons are fully ambidextrous and the folding stock is collapsible (four position).

The rifle will come three variants: the Special Forces (12″ barrel), Carbine (16″ barrel) and Designated Marksmen / light Sniper (16″ heavy barrel). This is the first time I have seen a designated marksmen rifle come standard with a 16″ barrel and is another step in the current trend towards shorter carbines and sub-carbines.

The standard rifle configurations are chambered in 5.56×45mm NATO and use STANAG (M16) magazines. By swapping the bolt head, lower receiver and barrel the rifle can be reconfigured to use 5.45×39mm, 7.62×39mm or 6.8mm SPC rounds.

12″ barrel (bottom and middle) and 16″ barrel (top)

The GLX 160 grenade launcher can be quickly attached to the ARX 160 or be used as a stand-alone weapon. In its most basic configuration is weighs less than 1 kg (2.2 lbs) and 2.2 kb (4.8 lbs) when fitted with a collapsible stock and grenade iron sights.

The GLFCS ( Grenade Launcher Fire Control System ) is a range finder / ballistics calculator for the GLX that attaches to the ARX 160 allowing for accurate fire.

Not much has been said about this rifle while the Bushmaster ACR and FN SCAR have been getting all the attention. I think the ARX / GLX 160 is an impressive package and I look forward to seeing how it performs in Italian service.

Credit for this blog post needs to go to REMOV who provided me with a lot of information. Thanks Remi.

The new line of Ruger M77 Hawkeye Compact Rifles are very very cool. They are 16.5″ carbines chambered in the intermediate .223 Rem, 7.62×39mm and 6.8mm SPC cartridges as well as the .300 Ruger Compact Magnum, .243 Win. 7mm-08, .308 Win. and .260 Rem.

Ruger M77 Hawkeye Compact 6.8mm SPC.

They feature a shorter stock and proportionately shortened forends and buttstocks. This shortened forend makes the rifle look longer than it is in the above photo. The intermediate caliber rifles weight 5 3/4 lbs.

I think these will be big sellers, especially the models chambered in intermediate cartridge where the short barrel will not have a significant impact on performance.

From the press release:

These 16-1/2 inch barreled rifles have an overall length of 35-1/2 inches, making them ideal hunting rifles for rugged terrain and heavy brush. The Hawkeye Compact rifles are available in a Hawkeye Matte Blued with an American walnut stock or the Hawkeye Matte Stainless model with a black laminate stock. The slim American walnut stock offers wrap-around cut checkering on the forearm and more rounded contours on the bottom of the stock and top of the pistol grips.

The Ruger M77 Hawkeye Compact rifles are offered in eight short action calibers, including .300 RCM, 7.62X39 and 6.8SPC. The walnut and blued models weigh approximately 5.75 pounds, while their laminate and stainless counterparts average 6.25 pounds each. Magazine capacity is 4 rounds.

The M77 Hawkeye Compact rifles feature the smooth and crisp Ruger LC6™ trigger, Mauser-type controlled feeding and a powerful claw extractor. A 3-position safety, hammer forged steel barrels and Ruger patented scope rings (provided at no charge) that install on the integral mounts and never shoot loose are also standard fare on all Ruger M77 Hawkeye rifles. The steel floorplate, bearing the distinctive Ruger logo, provides easy unloading and eliminates accidental “dumping” of ammunition.

Lee, a Blackwater armorer, emailed me some info on the BW15:

1.Yes we do offer the BW15 in more than just 5.56mm. As of now we are making them in 6.8mm and 7.62×39mm as well. The BW15 lower receivers are stamped Multi-cal.

2.We are using out own receivers and each weapon is a matched upper and Lower receiver. All of the serial numbers begin BW.

3. As far the weapons shooting MOA, we use only the best barrels and the Armorer that builds the weapons also test fires it. I do believe that if we say that it will shoot MOA it will. But on the other hand what if the customer can’t shoot that well. Are we to take the weapon back? In case you did not know, everyone is an expert when to shooting.

4. Barrel lengths start at 16″. You can request a 14.5 with a pinned and permanently affixed flash hider to make total length overall 16″. We can have a custom barrel made to your specs (will take extra time POR). However if a customer wants a 18″- 26″ barrel we can accommodate.

5. All weapons have standard anodized finish. We are not doing any coatings at this time.

6. All weapons are shipped with 2 Magpul 30 round magazines and a lock.