I can't help but think that a better solution than a .500 S&W speedloader is simply to keep far away from lion prides, rhino herds and dinosaur parks.

Veeshir said to me in an email ..

The prices are decent, the .500 at $25 are kinda high dollar but they make the only ones I've ever seen and it is a lot of aluminum, the rest are $15, or only $5 more than Cheaper than Dirt, plastic ones.

They'll make whatever you want too, if you click their links you can see they're CNC machines, they'll do one offs for people.

I got two for the .500 and they look good out of the box. Nice machining, no rough edges or burrs or anything, and they worked fine the few times I tried. Nice and smooth. I just got them today, but so far they look really good.

Veeshir wrote a review here.

[ Many thanks to Veeshir for the info. ]

If you have been reading the blog over the past year you will have seen the incredible ingenuity he has demonstrated in Nigeria, where there exist severe restrictions on guns and ammunition. His previous exploits include Turning Birdshot into Slugs for Self-Defense and Fabricating a Shotgun Stock. ]

I ended up just going back to the basics: and worked on the Pistol-grip. I did not know it was made of a thick plastic that could be drilled, sawed, filed and even melted in some parts to fit.

1. I simplified everything: I just drilled a through hole in the pistol-grip, and filed the edges.

1. Through-hole was about 5mm in diameter.

2. I then got a strong “Y” Bracket made: out of strong but springy steel. I had nuts welded to hold the stock.

1. See the fitting of the bracket to the pistol grip: aligned with the through hole.

1. I put a bolt through to hold bracket, and used spring- washers to hold it. Then fastened grip to Shotgun.

1. Screw Stock to nut onto Y bracket. Note the lower bolt is on nut welded to the regular bolt that comes with the shotgun: the one that fixes the pistol grip (Or stock) to the receiver. I put a bolt there so that the Y-Bracket rests on top, and using a Zip tie: stops the Y-bracket (And Stock) from swinging or flexing upwards.

2. “Perfect” fit. Stock fits. Will later need a reduction in LOP: it’s about 15” right now.

1. Y-man’s “Top folder” below (Just kidding: I definitely would NEVER fire it like this: I would get a mouthful of felt!)

Thanks, ALL of you who guided me there: I will update you when I do some firing this weekend.

I need your advice; and maybe you could ask a few friends. Remember that Mossberg 500A 12-gauge I got? Well, it came PGO (Again! Do they have something against regular stocks in Nigeria?!) Well, you know me: I have a restless mind, and restless hands (And some money to burn occasionally!) so I did some fabrication/ modification.

I kept it simple this time: I welded an “L-shaped” wire-type stock (Made out of a strong, springy steel rod derived from a screwdriver.) to the steel bolt that fastens the grip to the receiver. Once I tightened the bolt as normal to the shotgun grip: it was good to go. (See picture attached.)

My worry is this: I’m no engineer, but wouldn’t this put some stress on the bolt-hole of the receiver? Might repeated firing cause the Shotgun receiver to possibly fracture and even crack? Normally: the stress of recoil/ impact of firing taken by the stock (Or PG) is spread on the flat end of the receiver (Where the stock or PG contacts the receiver.) but my modification puts all the impact at the point where the bolt screws in.

• I haven’t tested my modification yet, but am I setting myself up for a cracked receiver? (Or worse?)

• Is my angle of the stock okay? It is straight along the “line of recoil”, it should be okay... What do you think?

• LOP is about 11 inches: and this is comfortable. But is it okay?

• No cheek-weld at all. I guess I’ll have to live with that.

Anyone know if the stress on the receiver during recoil could cause problems?

I am sure the length of pull will be fine as long as it is comfortable.

The stock features a collapsible M4-style stock, pistol grip, aluminum buffer tube and picatinny rails for optics. There also appears to be a rail on the side of the stock, although I am not sure what could be attached there.

On a Mossberg 500

The new forend features a lower rail, which could be used to mount a forward handgrip, and side rails for lights or lasers. I like the grip design.

CAA are selling the stock for $199.99 and the forend for $59.99. Mossberg kit here, Remington kit here.

Hat Tip: Tactical Life

The SPX features:

* 18.5″ ported barrel (the holes are in just behind the front sight)
* Picatinny rail
* LPA Ghost sight
* “M16 style” front sight
* Adjustable stock.
* 6 round magazine

This shotgun really seems to be crying out for an 8 round magazine upgrade.

The more expensive 590 SPX has a nine round magazine, bayonet lug and Ontario M9 Bayonet.

R&R Arms has it listed for $494.44 but have none in stock, I am not sure if Mossberg has yet shipped any.

UPDATE: There is also a 930 semi-automatic version of the SPX.

The Mossberg 903 SPX autoloader has the same features as 500 and 590 SPX except it has a 8 round magazine.

Mossberg 500 Road Blocker. Click to expand.

The two baffle muzzle brake looks like it was ripped off a .50 BMG anti-material rifle.

The Roadblocker muzzle brake in action. Note the bead sight.

For comparison: M107 / Barrett M82 .50 BMG anti-material rifle

The Road Blocker is chambered in 12 gauge, has a 18.5″ barrel and a 6 round magazine.

It was previously sold as a TALO exclusive but this year it is now a standard production shotgun. I am not sure what the MSRP will be but if I had to guess I would say $400.

There should be some good reverse thrust from the muzzle brake. If used correctly you should be able to follow up the blast of buckshot with shotgun-in-the-guts. Follow the instructions in my handy guide:

Just joking. Don’t get to excited!

Mossberg 590A, 6 round magazine, adjustable stock

A range of models will be available:

590A1 Adjustable – 6 Shot – 12 Gauge
• Barrel Length: 18.5”
• Sights: 3-Dot
• Choke: Cylinder Bore
• Overall Length: 36 1/8”
• LOP: 10 ½”- 14 ¼”
• Finish: Parkerized
• Stock: Black Syn, with 6-position, aluminum tube stock
• Weight: 7-½ lbs

590A1 – 6 Shot – 12 Gauge
• Barrel Length: 18.5”
• Sights: 3-Dot/Bead/Ghost Ring – depending upon model
• Choke: Cylinder Bore
• Overall Length: 39.5”
• LOP: 13-7/8”
• Finish: Parkerized
• Stock: Synthetic/Synth. Speedfeed – depending upon model
• Weight: 7-1/4 lbs.

590A1 COMPACT – 6 Shot – 12 Gauge
• Barrel Length: 18.5”
• Sights: Ghost Ring
• Choke: Cylinder Bore
• Overall Length: 38-5/8””
• LOP: 13”
• Finish: Parkerized
• Stock: Black (wood stock/synthetic forend)
• Weight: 7-1/4lbs

590A1 MARINER® – 6 Shot – 12 Gauge
• Barrel Length: 18.5”
• Sights: Bead
• Choke: Cylinder Bore
• Overall Length: 39.5”
• LOP: 13-7/8”
• Finish: Marinecote
• Stock: Black Synthetic
• Weight: 6-3/4 lbs

590A1 SPX – 9 Shot – 12 Gauge
• Barrel Length: 20”
• Sights: Ghost Ring
• Choke: Cylinder Bore
• Overall Length: 41”
• LOP: 13-7/8”
• Finish: Parkerized
• Stock: Black Synthetic

Mossberg SPX

590A1 – 9 Shot – 12 Gauge
• Barrel Length: 20”
• Sights: Ghost Ring
• Choke: Cylinder Bore
• Overall Length: 41”
• LOP: 13-7/8”
• Finish: Parkerized
• Stock: Synthetic/Synth. Speedfeed/Aluminum tube Adj. – depending upon model
• Weight: 7-1/4 lbs

The full press release is at AmmoLand.

A company called BrickArms sells Lego guns based on real guns. To image to the right is a WWII Sergeant armed with a M1A1 and his trusty 1911.

Other guns available are the MP5, M4, S&W 500 and more

even a briefcase uzi

Hat Tip: The Download Munkey