The Firearm Blog

Steve Doran proves that any gun can be accurate if you take the time to practice with it. He takes his Smith & Wesson Model 60 snub nosed revolver (1 5/8 inch barrel) and, firing 158 grain .38 Special factory ammunition and manages great accuracy at 100 yards!

Steve has a write up about the shoot over at his website.

S&W have made a special run of S&W 642 and 442 revolvers with ported barrels. These must make one heck of a bang when the trigger is pulled! Both are chambered in .38 Special.

Model 642


Model 442

Click to enlarge

There are at least five bullets stuck in that revolver barrel. RugerForum members seem to think is a Ruger Blackhawk in .357 Magnum. The squib loads could have been low powered .38 Special rounds or very badly loaded .357 rounds. That the shooter did not notice it after the 1st, 2nd, 3rd or 4th round is crazy!

It is hard to see if there is a bulge in that barrel, a symptom of a round fired into a blocked barrel. I think if had been a semi-automatic pistol there would have been a disaster. A revolver can vent gas in the gap between the cylinder and the barrel but in a autoloader pistol for a brief period of time the gas has no where to go and the pressure build up would be considerable.

A few weeks ago I was shooting some old .22 Longs out of a rifle which I had not fired them out of before. I nearly crapped my pants after the second round when I realized to forget to check the spotting scope to ensure that the first round made it out of the barrel and hit the target. I was shooting iron sights and could not see the target. I learnt a good lesson. Always make sure you hit the target, especially when you are shooting low powered ammunition.

Thanks to Advocate for the link.

The new Charter Arms “On Duty” revolver is a double action .38 Special snub-nosed revolver designed for concealed carry. It has a low profile, partly concealed, hammer that allows it to be used in single action but is also less likely to be snagged on clothing.

It features:

* Lifetime warrantee
* Exclusive eight-groove gas sealing barrel,
* Exclusive three-point cylinder lock up, no screw side plates,
* Hammer block safety system
* Charter’s fastest factory revolver-lock time.

Specs:

Cartridge: .38 Special + P
Barrel length: 2″ stainless steel
Frame: 7075 aluminum alloy
Capacity: 5 round
Weight: 12 ounces

The MSRP is $400.

Miguel Caballero, a Colombian, is a designer of ballistic vests for military and police and “bullet proof” fashionable clothing. Apparently he requires all new employees to be shot while wearing one of his ballistic vests! Here is a video showing blogger Erik R. Trinidad of The Global trip being shot point blank by a .38 Special revolver.

Even through I posted that impressive video of a guy being shot point blank with a .44 Magnum and .308 Win., I am still amazed at what little effect on the target the bullet has when it impacts a ballistic vest. Sure, I do understand the physics, but still!

More videos of people being shot by Miguel are here.

Someone from Bulletproofjackets.net posted the info about Miguel Caballero. Thanks.

Following on from the success of the Ruger LCP, Ruger have unveiled the Ruger LCR (Light Weight Compact Revolver). What sets it apart from other compact revolvers is that polymers have been used as much as possible. The Ruger LCR will be available 1st March 2009

Ruger LCR. Click to expand.

The revolver features:

* Double Action
* Polymer fire-control housing
* Aluminum frame with black “synergistic” hard coating
* Fluted stainless steel cylinder, lightweight and compact.
* 5 Rounds in the cylinder
* Replaceable front sight.U-notch rear sight.
* The fire control system has been designed with a friction reducing cam that allows a very smooth trigger pull.
* The internal lock has been designed so it will not interfere with the fire control components.

The Specs:

Caliber: .38 SPL+P
Capacity: 5 Rounds
Finish: Matte Black/Target Grey
Grip: Hogue Tamer w/ Sorborthane Insert
Barrel Length: 1.875″
Groove: 6
Twist: 1:16″ RH
Overall Length: 6.50″
Weight: 13.5 oz.
Front Sight(s): Replaceable, Pinned Ramp Front
Rear Sight(s): Integral U-Notch

The standard model has a recommended retail price of $525.

Ruger are also simultaneously releasing a model with Crimson Trace Lasergrips. It has MSRP of $792.

Ruger LCR-LG. Click to expand

GunBlast have already reviewed the LCR and were impressed (thanks to cmblake6 for the link):

The trigger pull on the LCR is very smooth, and very light for a pocket revolver. Many pocket revolvers have dreadful trigger pulls, and I get a lot of email from readers who buy a gun for defense, and have a very hard time pulling the trigger. If the production LCRs are like the one that I shot, the trigger pull problem is solved. That gun had what could be called a perfect trigger pull for a pocket revolver; a smooth and light double action. I do not know the pull weight of the LCR, but will measure such things when a production gun arrives.

I will update this post as more information arrives.

UPDATE: More info from Ruger

Friction Reducing Cam. Patent pending.

Fire Control Housing. Patent Pending.

There are a total of three new pending patents. Not bad for a wheel gun!

UPDATE: Holster compatibility:

* Blackhawk Inside Pocket – Size 4
* Black Hawk Inside Pant – Size 0
* Fobus TA85 (Standard)
* Fobus RU101 (Evolution)
* Uncle Mike’s Inside Pant – Size 0

UPDATE: The Ruger LCR will be available 1st March 2009

UPDATE: A video

The press release is after the jump.
Continue Reading »

Guns Holsters and Gear has the gun gossip:

“I wouldn’t bet my life on it, but if somebody was taking bets, I would bet that in the year 2009, Ruger might come out with one of those [the SP101] in .38 Special, +P rated in an aluminum frame…”

If they do release it then they will probably aim to do so at SHOT Show 2009 in January.

Ruger SP101 in .327 Federal Magnum

The Good:
The little Kel-Tecs are very easy to conceal, with very little weight or bulk. They are also very inexpensive.

The Bad and Ugly:
On the 2nd or 3rd round fired, the little bracket that the guide rod slides through fell out and disappeared. I’m told that Kel-Tec now makes slides without this piece, the bracket is a part of the slide, rather than a separate part.

More here.

Guns and Ammo have a review here.

I ran a couple of different types of ammo through the pistol, shooting as fast as I could recover. There is a distinct upward flip to the muzzle. You have to accept this in an auto so light, particularly when most of the weight is in the top half. Still, it was possible to keep six fast shots in a vital zone, and that is all the P-3AT is meant to do. In my hands, the pistol delivered the first shot about eight inches low and left of the remaining five. There were no malfunctions.