Bipod Leg Locking Levers From Catalyst Arms

Sticking with the simplistic-functionality theme, the Catalyst Arms team has just released the Leg Locking Levers for the Harris Bipod. Slipping over the knurled leg adjustments, the levers are used to quickly and easily adjust each leg individually using one hand. In the military, law enforcement and competition worlds, the quicker you can level your rifle on target, the greater the chance for success. I personally love gear like this – smart people making affordable and useable gear to solve real world problems.

Details, specifications and pricing are listed below.

 

Leg locking levers

FITS MODELS WITH KNURLED KNOB FOR LEG HEIGHT ADJUSTMENT

  • Easily adjust and set leg height with one hand
  • Stay behind the rifle while adjusting leg height
  • When legs adjusted and locked with the lever before full extension, the legs are much easier to retract than using the push button
  • Made in the U.S.A.

Catalyst Arms Bipod leG Locking Levers – MSRP: $39.95


Installation Instructions:

Rotate the knurled leg adjustment knob to the locked position. Place the lever over the knurled knob with the lever either on the right or left hand side depending on preference. Position the lever so it is sticking out to the side of the leg at approximately the 5 o’clock position if setting up for a right handed shooter, or or the 11 o’clock position if setting up for a left handed shooter. Once set you should be able to easily rotate the lever with the support side hand.




For Immediate Release:

BIPOD LEG LOCKING LEVERS NOW AVAILABLE TO UPGRADE BIPODS Beaverton, OR –

Catalyst Arms, LLC, a firearms accessory company, has introduced ambidextrous Leg Locking Levers to significantly improve the performance of Harris Bipods. Made for the Harris series bipods without “notched” legs, these new Leg Locking Levers allow the shooter to make rapid and efficient leg length adjustments with one hand while behind the rifle. The new Leg Locking Levers easily install on top of the factory leg adjustment knobs. To use in the field, simply pull the leg to the desired height and flip the lever to the locked position with the same hand. To release, simply flip the lever the opposite direction. Machined from 6061-T6 aluminum, the new Catalyst Arms Leg Locking Levers are lightweight and install with a single screw without any modification or disassembly of the bipod. With the bipod legs in the folded-up position they are conveniently out of the way to keep from getting hung up on each other or gear. The new Catalyst Arms Leg Locking Levers are now available in black (hard coat anodized), Red (anodized) and Tan (Cerakote®) with an MSRP of $39.95. For more information go to www.catalystarms.com About

Catalyst Arms: Catalyst Arms was founded in early 2017 with a simple goal; to develop innovative, shooter driven, truly useful firearms accessories. Ideation comes from time out in the field and behind the gun while hunting, shooting in competitions, plinking and even while carrying for personal protection. The RPR Magazine Release Extension and Harris Bipod Leg Locking Levers are the first of many exciting products in process at Catalyst Arms.





Pete

LE – Science – OSINT.
On a mission to make all of my guns as quiet as possible.
Pete.M@staff.thefirearmblog.com
Twitter: @gunboxready
Instagram: @tfb_pete
https://www.instagram.com/tfb_pete/


Advertisement

  • Dougscamo

    Love my Harris bi-pod but this….if it works….addresses my biggest gripe with it….adjusting the legs with 1 hand….

    • CatalystArms

      Dougscamo, it does work and quite well at that. We’ll try to get a video up soon on the Catalyst Arms Facebook page and website. – Catalyst Arms

  • Martin T

    Dare I say this may be easier to adjust than the notched legs… and with more adjustment potential as well.
    Well done guys. Now I gotta consider getting another Harris to try these out.