Gun Review: Howas New Chassis Rifle in 6.5 Creedmoor

I recently had the pleasure of testing out Howa’s new HCR, or Howa Chassis Rifle. The Howa HCR is built using a Howa 1500 Heavy Barreled action and an Accurate Mag aluminum rifle chassis. For testing I received a model chambered in 6.5 Creedmoor. Testing the Howa Chassis Rifle consisted of several hours of dry fire and familiarization, as well as 8 hours on the range.

Key Specifications of the Howa Chassis Rifle include:

  • Howa 1500 20” & 24” Heavy Barreled options
  • Black 6061-T6 ACCURATE MAG aluminum Chassis with Free-Float M-LOK fore end
  • LUTH-AR Carbine MBA-3 butt stock with LOP Adjustment from 12.5” to 16.75”
  • Adjustable Comb
  • ERGO MSR Grip
  • 10 RD ACCURATE Mag / Detachable All Steel Mag– Teflon Coated
  • 2 Stage H.A.C.T. Trigger
  • 3 Position Safety
  • The Howa Chassis Rifle is chambered in .223/5.56, .243 Winchester, 6.5 Creedmoor and 7.62/.308 Winchester. The Firearm Blog was provided a 6.5 Creedmoor for testing.
  • The Howa Chassis Rifle has an MSRP of $1299.
IMGP6364

Howa Chassis Rifle. Awesome piece of hardware.

After picking up the Howa Chassis Rifle from my FFL, I unpackaged it, attached a bipod, and started an inspection from muzzle crown to stock. The machine work and anodizing on the chassis were excellent. The barrel and receiver were in perfect condition and the Howa 1500 action was smooth. The trigger pull measured in at 2 lbs., and the trigger was crisp and clean. The action screws were torqued above 45 in/lbs, and the castle nut holding the receiver extension was secure. The Howa Chassis Rifle does not include a scope rail. The rail I attached for testing was the Tally Short Action Howa 1500 20 MOA rail. After attaching the Tally Scope mount I attached a First Focal Plane, Bushnell HDMR 3.5 x 21 riflescope, rolled out my shooting mat, and proned out behind the Rifle.

IMGP6373

Two issues that I noticed immediately were the lack of recoil pad on the LUTH-AR stock and the grip angle of the ERGO MSR grip. The butt stock end-plate of the LUTH-AR had a simple piece of hard plastic. Though adjustable, the rigid texture and the design of the butt stock end plate is not, in my opinion, suitable for extended time on the range in the prone position.  To accommodate my personal preference, I removed the plastic butt section and modified a Limbsaver pad to replace it. Although the angle of the ERGO MSR grip is perfect for an Ar-15, I dislike it for a precision rifle. When prone with precision rifles, I like to keep my wrist as straight as possible to facilitate a rearward pull from my distal phalange. The ERGO MSR grip was replaced with a BCM GUNFIGHTER grip. In addition to the grip and the butt pad I added a WieBad Mini Stock Pad to the adjustable comb of the LUTH-AR stock.

IMGP6403

The end plate of the LUTH-AR MBA 3 stock was replaced with a Limbsaver recoil pad. I simply drilled a small hole and attached it with the original screw. I had no problems with this setup during testing.

IMGP6405

The ERGO MSR was replaced with a BCM Gunfighter grip. I prefer the angle of the BCM Gunfighter for precision work.

IMGP6410

A WieBad mini stock pad was used to add some grip to the comb.

IMGP6414

During testing I used the provided AI style Accurate Mag, magazine as well as a Magpul magazine. Both performed flawlessly.

Field Testing

Field testing was done at the family ranch in the Highlands of Central New Mexico. Having recently taken Accuracy 1st’s LONG RANGE 2 class in Clarendon Texas, I was primed and excited to reinforce my recent long range training.  All shots were taken due south. Barometric Pressure was around 24 inHg, humidity was 21%, and the average temperature for the shoot was 52 degrees Fahrenheit. Density altitude hovered around 6750 feet and I had constant full value wind of 8 – 10 mph. For this shoot I did not have a spotter and the ground was muddy, making it extremely difficult to observe splash. My target for the shoot was the 18 Inch AR500 Steel Gong from Grizzly Targets.

IMGP6346

My main target was an 18″ gong from Gizzly Targets. Grizzly Targets has an awesome selection of products.

IMGP6356

During sight in, I used a MagnetoSpeed Sporter chronograph to get my velocities.

For the test, Hornady was kind of enough to send me both some Hornady 140 grain ELD MATCH and some 143 grain ELDX  Precision Hunter.  Though I did test both rounds, I ultimately chose the Hornady 140 grain ELD MATCH due to the slightly higher ballistic coefficient of the round and the smaller group sizes I attained during sight in.  Ballistic calculations were done using the Applied Ballistic application designed by Bryan Litz. During testing I fired 10 rounds through a MagnetoSpeed chronograph to measure velocity, and attained the following results. The numbers demonstrate an extreme spread of 72 feet per second, with an average velocity of 2,636 feet per second. For long range work past 1000 yards I like to see a spread of no more than 20 fps.

10 Shot string. Hornady 6.5 CREEDMOOR 140 grain ELD MATCH. Lot # 3163713. Air temperature was 52 degrees Fahrenheit

  • 2602
  • 2657
  • 2640
  • 2674
  • 2637
  • 2606
  • 2638
  • 2652
  • 2645
  • 2612
IMGP6430

Hornady 140 grain ELD MATCH. Prone off of a bipod. 5 shot group.

IMGP6424

Hornady 143 grain ELDX Precision Hunter. Prone off of a bipod. 5 shot group.

After zeroing the Howa Chassis Rifle and attaining the appropriate chronographic data, I drove to my first shooting position. The first shooting positioned measured 836 yards away from the Grizzly Target. At 836 yards, I held 5.3 mils high and adjusted .9 mils for wind. I squeezed the trigger and observed a solid impact on the Grizzly target. Cycling the bolt, I held the same holds, squeezed the trigger, and observed another solid hit through my Horus H59 reticle. One more shot, one more hit, and it was time to move back.

IMGP6357

My first shooting station of the day. 836 yards. Pictured is the Howa Chassis Rifle and my Leica rangefinder.

I drove to the “thousand yard line,” rolled out my shooting mat, set up my rifle, consulted my Kestrel 4000, and got to work. For 1000 yards I would need to hold 7.1 mils high and 1.1 mils to compensate for wind. After getting on target and holding the appropriate mils in my Horus H59 reticle, I gently squeezed the trigger and observed an impact. Cycling the bolt, I squeezed off another shot and was not surprised to observe another hit. A 1000 yard shot with a .308 can be a little bit challenging depending on your twist rate and bullet selection. This particular shooting session was the second time I had ever fired the 6.5 Creedmoor round, and I was simply stunned at how easy it was to put rounds on target at 1000 yards. I cycled the bolt one more time, squeezed off another shot, and observed another hit. Time to move back.

Feeling ambitious, I used my GPS unit and drove exactly 1 mile away from the Grizzly target.  I rolled out my shooting mat, set up my rifle, consulted my ballistic calculator, and squeezed off another shot. No impact. At 1760 yards, the lack of spotter and the muddy ground made it impossible to observe splash. I fired off one more round, failed to hit the target, and decided that the mile shot would have to wait until after SHOT show.

IMGP6369

Final shot of the day. 1120 yards.

I drove back towards the target and set up my final shooting position for the day. At 1120 yards, I held 8.5 mils high and 1.3 mils to account for wind. My first 3 rounds were hits, my 4th was over the target, probably due to a round that had a higher velocity coming out of my barrel, and my 5th landed left of the target, probably due to wind or some shooter-induced cant. After consulting a video that I had recorded through my spotting scope, I held on the right side of the target and fired several more strings. I had an estimated hit ratio between 70 – 80%. Shooting at 1120 yards I would have preferred a spotter and some more consistent ammunition. With the sun setting I decided to pack up, check on the cows, and head home.

In the video below you can see my first 5 shots at 1120 yards. I could barely see my hits, and I had to watch this video to see what my rounds were doing. After this string, I held on the right edge of the target and had a higher hit percentage. In the video you can see some awesome trace! The shooting starts at the 32 second mark. I was pretty happy with a first round hit at 1120 yards.

Final thoughts

With the rising popularity of Precision Rifle competitions, and long range shooting in general, companies are clamoring to get modular precision rifles into the hands of their customers. I think that Legacy Sports/Howa did an amazing job with the Howa Chassis Rifle. The rifle was very accurate and the trigger is excellent. The 6.5 Creedmoor round, though potent, had a mild recoil. The overall execution of the Howa Chassis Rifle is top notch and, aside from a few personal modifications, these rifles are good to go. I would have liked to push the round a lot farther, but the lack of spotter and inconsistencies with the ammunition made that challenging. Fellow writer Tom R and I will head out to the ranch in late Spring to do some 1 mile shots. For our 1 mile shots, I will use a Howa 1500 chambered in 6.5 Creedmoor and more consistent ammunition. I am looking forward to it.

A big thanks to Hornady and Grizzly Targets, as well as Legacy Sports International. For those going to SHOT show, Legacy Sports International will be at booth #3036.



Thomas Gomez

Thomas Gomez currently resides in the mountains of central New Mexico. He has an M.B.A, an Ar-15/M16/M4 armorer certification from Specialized Armament Warehouse as well as a Glock armorer certification. Aside from writing for The Firearm Blog he works as a Clinical Analyst for a large Hospital. He spends his free time farming, ranching, hiking, fly-fishing and hunting in the beautiful forests and prairies of New Mexico. He can be reached at LOADTHATBIPOD@gmail.com


Advertisement

  • RetroG

    Is the barrel threaded?

    • Matt LSI

      we offer threaded barreled options in 20″ and 24″

  • Rory Deubel

    That’s a beautiful rifle. I’ve never done any long range shooting, but that has to be exciting to hear the gong ring at 1000 yards. Can’t wait to hear how you do later on with the mile long shots! Thanks for the article.

    • Thomas Gomez

      Cheers amigo!

  • Gary Kirk

    Nice shooting for the conditions, look forward to seeing your mile shots. I’m going to get a RPR, and have considered the 6.5, but don’t want another caliber to have to add to the list. Do you personally think it’s worth investing in over 308, which I already have multiple rifles chambered in and everything else for?

    • Thomas Gomez

      Hello Gary

      If all of your shots are 1000 and in, stay with the .308/7.62. There are a lot of advantages to .308’s. You can get good velocity with 18-20 inch barrels. Barrels last a long time. (10k) You can practice with 147 – 150 grain M80 MIL ammo. (I can still hit an 8 x10″ steel plate at 800 yards with a M80, though at a minimum my Density Altitudes on the low end are around 6500 feet. In the middle of summer with DA hovering around 10,000 feet, I can send a 7.62 x 39 round 1000 yards) If you want to shoot a .308 to a mile, you need at a minimum a 1/10 twist, though 1/8 is better, and some high BC bullets. (I am sure people have done it with 1/11 and 1/12 twist rates. It seems for every rule there is an exception) The big thing with long shots is truing your Ballistic Coefficient at tran-sonic and sub-sonic ranges. Long story short…for 1000 and in, .308 is fine.

      I attended a course in Texas recently and the majority of the shooters in my cell, had .260 Remington’s or 6.5 Creedmoors. After we trued our BC’s on a target at 1000 yards, we engaged a 12 inch target at 1409 yards. I was the lone odd ball using a .308. The 260/6.5 creed guys had first round hits on the 1409 target. It took me 3 attempts. The advantage the 260/6.5 guys had was a shortened time of flight and less wind drift. We had a full value wind of 12 – 15 mph.

      1000 and in = .308/7.62. 1000 and beyond….6.5 with at least a 24 inch barrel.

      Hope this finds you well!

      • Gary Kirk

        Thank you very much for the reply, have made hits beyond a mile, but have certain rifles for that job (300WM, 338LM, 416Barrett, and last but not least 50BMG; haven’t gotten into the Cheytac “yet”).. Just wanted an honest opinion on the 6.5 vs .308 debate. As I haven’t delved into said cartridge yet.. If it is indeed worth all the internet hype, I will go all in and get my RPR in 6.5. Again, thanks for the reply.

        • Thomas Gomez

          Well then…it appears I was preaching to the choir! You have some great calibers, and I imagine some nice rifles. If you reload, you should look at the .260 Remington. If you don’t, 6.5 Creedmoor. Rumor around the campfire is that SOCOM is looking at the .260 Remington. They liked they 6.5 CM, but the .260 worked a little bit better in polymer cases, and fed better through a semi-auto Ar-10 derivative. SOCOM will be using .260 Remington and the .300 Norma in the very near future.

          • Erick Matta

            Very interesting as I was aware of the change to 300norma but didn’t know they were also looking at 6.5mm as well. Thank you for the info Tom!

      • iksnilol

        Do you really lose much velocity by ditching 2 inches of barrel? I mean, I done reckon a 6.5 (whether it be .260 remington, 6.5 Creedmoor or 6.5×55) with a 22 inch barrel does much better than a 308 at lets say 1200 meters (and even more at 800-900 meters).

  • Shaun Connery Oliver II

    Thank you Howa! Can you say “Tacticool”?
    Alright, who wants to throw some factory and hand loads through this one? Cause I am SO in!!!

    • Thomas Gomez

      Tacticool indeed! Cheers!

  • Rusty S.

    Great shooting! It’s always awesome getting 1st round hits 1k+ yards out. Well done!

    • Thomas Gomez

      Thank you Sir. I liked your article as well! Great shooting! I think it’s neat that TFB now has 4 writers that have legit long range training. Rusty S, Mike G, Tom R and me. Good stuff.

  • Dave Webster

    Outstanding review. No hand holding or false praise just straight information.
    I am curious as to the weight of the weapon but thats easily googled.
    Great work!

  • Marcus D.

    I’ve read recent articles about the Savage chassis rifle, the Begara rifle with a cast-in aluminum chassis, and now this, all in 6.5 Creedmore, and all around the same price. We need a shoot off!

  • DR.NUMBERS

    Howa tends to put out good stuff at a nice price point. How do you think it stacks up against the RPR in 6.5?

    • Thomas Gomez

      Hello DR.

      I have no experience with the Ruger RPR. Looks like a nice rifle. I will ask my editor to get me one after SHOT.

      Hope this finds you well!

  • Erick Matta

    This is the rifle I’m interested in picking up and appreciate the time you took for this article. Not a huge fan of the RPR, but thinking I’ll also prefer the HCR over the Savage stealth. Are you just east of the Sandia mountains or is that the sangre de christos in the background? I really am looking forward to the mile attempt.

  • Jimbo

    Several HOURS of dry firs!?

  • Shawn

    Nice write up ! I have a 308 hcr and just a question…. can you give details on what rubber limbsaver you used specifically and how you attached it cause that luth ar butt plate doesn’t do squat.

  • Baggy270

    Nice shooting!

  • LetsTryLibertyAgain

    Good shooting for factory ammo out of a new rifle!

    I have the non-modular version of the Howa 1500 in .308 and am very pleased with the quality and the value. I think Howa is a bit under rated, but that’s slowly changing.

    There may be a 6.5 Creedmoor rifle in my future… like I need another rifle! I need to get to the range more often with the rifles I already have.