CTK Picatinny Rail for LUTH-AR Stocks

LUTH-AR Rail with Ultimate Rail-Pod_01

I, for one, was happy to see the release of the LUTH-AR stock, as it provided a lower-cost, lighter, weight competitor to the Magpul PRS (review coming on the LUTH-AR), but the stock is missing a few features that endears the PRS to me.

CTK Precision our of Clintonville, WI has stepped up with a solution to the largest complaint I have had on the rifle, the lack of a rear monopod mount. The little rail section is added to the bottom of the stock quickly and easily through a single mounting point. Adding to the additional picatinny rail functionality, the rail adapter also includes a sling swivel mount.

The adapter is available directly from CTK for $35.00

CTKPrecisionLUTHARRail_03

Full Press Release Below:

CTK Precision Introduces AR Buttstock Rail

Picatinny Rail for LUTH-AR Stock

Clintonville, WI – CTK Precision, manufacturer of innovative shooting equipment and gun accessories, is proud to introduce the AR Buttstock Rail for the LUTH-AR stock.

The AR Buttstock Rail is a Picatinny rail designed to mount at the sling attachment point on the underside of LUTH-AR MBA-1 and MBA-2 stocks. This accessory rail meets MIL-STD-1913 specifications so it may be used as a means of attachment for any product designed for use on a standard Picatinny rail, including the CTK Precision Ultimate Rail-Pod.

The AR Buttstock Rail incorporates a sling swivel mount point so that you may attach a sling, in addition to a rear monopod.

AR Buttstock Rail Specs and Features:

  • Compatible with LUTH-AR MBA-1 and MBA-2 stocks.
  • Construction: CNC machined from billet 6061 aluminum for high strength and low weight.
  • Finish: Durable black Mil-Spec hard coat anodized.
  • Length: 2.50″
  • Width: .86″
  • Height: .83″
  • Weight: 0.7 oz
  • Mounting: Mounts at the sling attachment point on the underside of the LUTH-AR stock.
  • Meets MIL-STD-1913 specifications.
  • Includes sling swivel mount point.
  • Made in the USA!

For more information on the AR Buttstock Rail, visit: http://www.ctkprecision.com/ar-buttstock-rail.aspx



Nathan S.

One of TFB’s resident Jarheads, Nathan now works within the firearms industry. A consecutive Marine rifle and pistol expert, he enjoys local 3-gun, NFA, gunsmithing, MSR’s, & high-speed gear. Nathan has traveled to over 30 countries working with US DoD & foreign MoDs.

Nathan can be reached at Nathan.S@TheFirearmBlog.com

The above post is my opinion and does not reflect the views of any company or organization.


Advertisement

  • Phil Hsueh

    Minor typo in the first sentence of the second paragraph, it should be read “out of” instead of “our of”.

    • Dracon1201

      Welcome to TFB.

      • anon

        Shots Fired

    • Grindstone50k

      Also “lighter” and “weight” should not have a comma betwixt them.

  • RocketScientist

    Anyone have a source for a rear monopod that wont break the bank? I don’t need it to be particularly fancy, but I’m amazed at the cost of all the monpods I’ve seen out there. Especially for such a simple device.

  • Porty1119

    Can I mount a rear-facing strobe on that rail to signal my fellow operators when I am about to back up?

    • Ethan

      Infrared, of course. Operators only use infrared strobes with their NODs. ;-P

  • Alex

    I have that upper! Reverse your scope mount so the nuts face the other side. I know it’s rare to have interference between your knuckle and the hardware, but when it happens it’s not fun.

  • ghost

    So you can hang more stuff on it.

  • ghost

    Can I hang my pickabeer cooler rail on it?