Head Down Products AR and Glock

IMG_0996

Down at the Big 3 East, Head Down Products showed off their firearms.

Their custom Glock is rather impressive for package you get. It retails for $799.

That is $799 for the entire Glock. Not $799 for the custom work. If you send your Glock to them, they charge $400 for the custom work.GLOCK_RX1

DSC_0135

Reconditioned glock comes in models 22, 17, 19, 23 (depending on Availability) conversion barrels available

– Cut serrations on side of slide for press checks
– Cut out on top of slide reduces weight and heat
– Textured grip increases stability for better weapon control
– Extended slide release
– Cut out under trigger guard helps create a more comfortable grip
– All internal parts polished for smoother operation
– Ameriglo black out rear and fiber optic front sights
– Salt Bath Nitride finish on slide
– Head Down Custom pistol bag

Enhanced versions with upgraded triggers, threaded barrels, etc are also available upon request.

All Head Down custom glocks come with our Pistol for life warranty!

I really like their front slide serrations. It is like traditional checkering you would find on wood forearms on shotguns.

 

Here is a closer look from VSO Gun Channel.

 

Their BIllet AR is called the Triton.

DSC_0011 DSC_0012

The Triton is an all billet receiver AR. They warranty their products for life.

Caliber: 5.56 NATO
Barrel Length: 16″ HDP Profile
Gas: Carbine Length
Rate of Fire: Semi-Auto
Rifling: 1/7″ RH (5.56)
Handguard:12″ Length Free Float Quad Rail
Stock: MFT Stock
Pistol Grip: Plastic Mil-Spec Grip
Magazine: 1 x 30rd Lancer Magazine
Muzzle Device: A2 Flash HiderMSRP: $1099
SKU: TRITON-12-556-BLK
– Mil-Spec Carpenter 158 bolt carrier group HPT & MPI with properly staked gas key
– Standard Mil-Spec GI (6lb) trigger
– Salt Bath Nitride Coated Steel Barrel
– Precision milled billet upper and lower receiver
– Intregal trigger guard
– Type III hard coat anodize finish
– Flared magazine well
– All of our rifles ship with Modern Spartan Accuracy Oil and Carbon Destroyer
– All 5.56mm lower receivers are marked “CALIBER: MULTI”
– All rifles come standard with a hard rifle case
– Rifle For Life Warranty


Nicholas C

Co-Founder of KRISSTALK forums, an owner’s support group and all things KRISS Vector related. Nick found his passion through competitive shooting while living in NY. He participates in USPSA and 3Gun. He loves all things that shoots and flashlights. Really really bright flashlights.

Any questions please email him at nicholas.c@staff.thefirearmblog.com


Advertisement

  • echelon

    To each their own, for sure. For me it’s just too much and seems to go way beyond functionality.

    Next thing you know they’ll do something crazy like start naming the parts of the gun like “grip zone”, etc…it’s all downhill from there.

    • Hank T.

      I’m confused. Can you enlarge upon your comment “way beyond functionality?”

      • echelon

        I just meant that the slide cuts go beyond just having a functional purpose and get into an aesthetic “artsy” look and feel. I would also argue the same about the grip stippling, although it’s less so.

        And I’m certainly not begrudging anyone if they do like this sort of thing. All I’m saying is you could easily make some front cocking serrations that look more akin to the rear ones and you could do more straight forward porting holes on the top, etc. And to me that would be more of a minimalist – just do enough to get the job done, kind of thing that I would find more preferable.

    • mike

      I refuse to buy an xd now. I hate the “grip zone”. They need to keep stupid crap like than in their advertising, not actually on the weapon. Next their mags will be labelled bullet zone and the top of the slide will say sight zone. Trigger guard is finger zone.

      • Grindstone50k

        Muzzle is “bang zone”

  • Slim934

    ….aren’t Glock slides already Salt Bath Nitride finished?

    • D.B. Patrol

      They are, just not when you cut into them, exposing unfinished surfaces.

      • Slim934

        Ahhhh yes, you’d have to do that after cutting into them. OK that makes more sense thanks.

  • mikie

    That is a great looking Glock!

  • Wolfenstein

    Can you please tell me where I can find a Gen 4 G17 for 300?? I will buy one RIGHT MEOW.

    • Andrew

      I think its refurb’d.

  • JQPub

    I love the cut trigger guard. Wonder if i can do this myself. I hate shipping handguns.
    The front site is awesome. That’s the only other mod I’d do on my G19 honestly.
    Their prices are pretty awesome. If I was to buy over again, I’d consider their build.

  • Bill

    I wonder if opening up that much of the slide is just asking for debris, mud and trash to get in there. Of course, it would make it easier to get out, but I’m not sure I’d literally open the door to dust and dirt like that, particularly on a working gun known for it’s reliability in all kinds of conditions. It looks “good,” I guess, but you aren’t removing that much weight from an already light gun. Love the front serrations, I’m a chronic chamber-checker.

  • Alucard

    For $799 I’d rather buy a Ruger 1911 and some .45 acp ammo with it.

  • Joshua

    Lifetime warranty is stupid in a rifle. If you actually use it you’re going to break it and I guarantee they won’t replace your bolt ever 10,000 rounds.

  • NotoriousAPP

    Will never do business with these guys again. They sent me two lower parts kits, both had parts missing. I tried several times to get them to send the missing parts but they would not.

    …one kit was missing the grip…..how do you send a kit out with a large piece like that missing?

  • John Evans

    And contact Info for this company is………