NAA Top Break Mini Coming Soon
This is, for lack of a better word, cute ...
More photos at Trail Boss TV.
24 Responses to “NAA Top Break Mini Coming Soon”
Sort The Responses Below: |
-
Roadkillwrote on September 30th, 2010 at 10:01 pm Link To Comment |
This is really neat. I’ve long wanted a break open, just for shits and giggles. If they made one like the mini-master, it would be a really neat small snake gun. For times you want to bring that big .45, but you want the light .22mag shot for small pests at low weight. With the recommended price, I wouldn’t be quick to get this though. The most I’d pay is $300.
Please rate this comment:
0 
0 -
DaveP.wrote on October 01st, 2010 at 5:30 am Link To Comment |
MSRP doesn’t equal store retail price, especially here in little ol’ gun-freindly NC. “Less than $500″ covers a lot of turf. I’d certainly consider one if the store price is less than $300… which is about the sweet spot for impulse purchases anyway, and therefore about the price point that NAA should be shooting for.
Please rate this comment: 0 0 -
Mattwrote on September 30th, 2010 at 9:10 pm Link To Comment |
Ehh it seems much easier tooad by I don’t thing it looks as good as the solid frames.
The speed up in reload doesnt really interest me much. If I have to reload a mini revolver under fire I’m pretty much screwed allready.
Please rate this comment: 0 0 -
Cymondwrote on September 30th, 2010 at 5:18 pm Link To Comment |
Pros: Neat, more fun to shoot, I have a thing for top-break revolvers
Cons: Cost, uncertain availability.The estimated price is more than double the cost of a comparable solid-frame model. However, it would be a lot of fun to have a Mini Master based on this. The standard MM is on my list already. Unfortunately, it won’t come anywhere close to fully extracting .22 WMR. The extractor only reaches 3/8″ and my .22 LR shells measure over 1/2″ long. Do I want it? Yeah! Will I buy it? Not soon at that price. A lot of things rank higher on the wishlist.
Please rate this comment: 0 0 -
Mike Swrote on September 30th, 2010 at 1:56 pm Link To Comment |
I could go for one of those!
Please rate this comment: 0 0 -
Bryan Swrote on October 01st, 2010 at 5:34 am Link To Comment |
Where do you guys get fun to shoot? Fun may be being able to hold onto a gun with a whole 2 fingers, but for those of us taller than 3′ tall and lacking purple or green hair, I would say an interesting novelty.
Please rate this comment: 0 0 -
Mehul Kamdarwrote on October 04th, 2010 at 1:27 pm Link To Comment |
I will buy one. My first revolver was a Webley Mk III top break. I’d love it if NAA would go bigger in the future and produce larger chamberings. This is the kind of product that gets my old heart warmed up.
Please rate this comment: 0 0 -
Rogerwrote on February 01st, 2011 at 10:42 am Link To Comment |
i WILL BUY ONE BECAUSE I CAN……
Please rate this comment: 0 0 -
cmblake6wrote on December 06th, 2010 at 7:13 pm Link To Comment |
That is so cool!
Please rate this comment: 0 0 -
Scroungerwrote on October 27th, 2010 at 4:13 pm Link To Comment |
The trial run of the break top NAA 22 mags were shipped on Oct. 22 and delivered on Oct. 26 to the FFLs of those who placed factpru orders by the cutoff date. //// I got mine.
Please rate this comment: 0 0 -
Scroungerwrote on October 13th, 2010 at 9:26 pm Link To Comment |
The price is $450 and must be ordered directly from the NAA factory.
Please rate this comment: 0 0 -
Phil Wongwrote on September 30th, 2010 at 1:42 pm Link To Comment |
FAR more user-friendly and utilitarian IMO than the current solid-frame, remove-cylinder-to-load Mini-Revolver(and I’ve owned – and subsequently sold – two Mini-Revs)…no more fumbling/dropping the cylinder pin, or a loaded cylinder, while loading/unloading – especially at a public range, during a cease-fire, while everybody else on the line is waiting for YOU to unload and show clear…massive time-saver during a Basic Pistol or CCW class too, especially for novice shooters who thought the gun looked “cute” and bought it without considering its “challenging” handling qualities under stress or time pressure.
I am already considering buying one to let beginning shooters evaluate, as well as for possible use as a personal hideout gun.
Please rate this comment: 0 0 -
Woodroezwrote on September 30th, 2010 at 1:18 pm Link To Comment |
It looks like the way the break action is actuated might make it impossible to use that laser sight on it. I don’t think I would have gotten that laser anyway, but that’s a bit of a bummer.
Sadly, the lack of an exposed cylinder pin means no bayonet attachment, either
Please rate this comment: 0 0 -
Gunmartwrote on September 30th, 2010 at 3:22 am Link To Comment |
They are slated for September??? And they say price will be less then $500.
More pics and specific details here:
Please rate this comment: 0 0 -
Gunmartwrote on September 30th, 2010 at 3:05 am Link To Comment |
I think it will make them more viable as a fun plinker…. This shoudl drive sales for a already popular little gun. Price is steep however.
Please rate this comment: 0 0 -
AJ187wrote on September 30th, 2010 at 2:36 am Link To Comment |
Finally, a affordable break top revolver.
Please rate this comment: 0 0 -
Tom Stonewrote on September 30th, 2010 at 2:05 am Link To Comment |
Better than a small broken bottle.
Please rate this comment: 0 0 -
Gunmartwrote on September 30th, 2010 at 3:23 am Link To Comment |
Opps…. More pics and specific details here:
http://gunmart.blogspot.com/2010/09/naa-mini-top-break-coming-in-september.html
Please rate this comment: 0 0 -
Paul810wrote on September 30th, 2010 at 5:06 am Link To Comment |
That’s awesome! I really want one.
Please rate this comment: 0 0 -
Mactrekkiewrote on September 30th, 2010 at 10:40 am Link To Comment |
Definitely going to be my new super concealed carry weapon. Tired of this P-32.
Please rate this comment: 0 0 -
Jaminwrote on September 30th, 2010 at 8:45 am Link To Comment |
Hrm.
I bought a .22 NAA mini for my sister for her CCW because it had the half detents on the cylinder and the folding grip over the trigger.My only complaint was the effort it took to pull the cylinder out and reload with the tiny pins and all. But safety and reliability > effort.
I wonder if they’ll let me trade up to this one. :p
Please rate this comment: 0 0 -
chriswrote on September 30th, 2010 at 6:40 am Link To Comment |
ME WANT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please rate this comment: 0 0 -
hojowrote on September 30th, 2010 at 5:42 am Link To Comment |
dammit NAA, I was perfectly happy with my “remove cylinder to load” .22 mag mini until I saw this.
Please rate this comment: 0 0 -
Toddwrote on September 29th, 2010 at 10:12 pm Link To Comment |
I’ll buy that.
Please rate this comment: 0 0
Leave a Comment
-
Twitter
-
Email Subscription
-
Facebook
Top Posts
-
Categories
i WILL BUY ONE BECAUSE I CAN……
That is so cool!
The trial run of the break top NAA 22 mags were shipped on Oct. 22 and delivered on Oct. 26 to the FFLs of those who placed factpru orders by the cutoff date. //// I got mine.
The price is $450 and must be ordered directly from the NAA factory.
I will buy one. My first revolver was a Webley Mk III top break. I’d love it if NAA would go bigger in the future and produce larger chamberings. This is the kind of product that gets my old heart warmed up.
Where do you guys get fun to shoot? Fun may be being able to hold onto a gun with a whole 2 fingers, but for those of us taller than 3′ tall and lacking purple or green hair, I would say an interesting novelty.
MSRP doesn’t equal store retail price, especially here in little ol’ gun-freindly NC. “Less than $500″ covers a lot of turf. I’d certainly consider one if the store price is less than $300… which is about the sweet spot for impulse purchases anyway, and therefore about the price point that NAA should be shooting for.
This is really neat. I’ve long wanted a break open, just for shits and giggles. If they made one like the mini-master, it would be a really neat small snake gun. For times you want to bring that big .45, but you want the light .22mag shot for small pests at low weight. With the recommended price, I wouldn’t be quick to get this though. The most I’d pay is $300.
Ehh it seems much easier tooad by I don’t thing it looks as good as the solid frames.
The speed up in reload doesnt really interest me much. If I have to reload a mini revolver under fire I’m pretty much screwed allready.
Pros: Neat, more fun to shoot, I have a thing for top-break revolvers
Cons: Cost, uncertain availability.
The estimated price is more than double the cost of a comparable solid-frame model. However, it would be a lot of fun to have a Mini Master based on this. The standard MM is on my list already. Unfortunately, it won’t come anywhere close to fully extracting .22 WMR. The extractor only reaches 3/8″ and my .22 LR shells measure over 1/2″ long. Do I want it? Yeah! Will I buy it? Not soon at that price. A lot of things rank higher on the wishlist.
I could go for one of those!
FAR more user-friendly and utilitarian IMO than the current solid-frame, remove-cylinder-to-load Mini-Revolver(and I’ve owned – and subsequently sold – two Mini-Revs)…no more fumbling/dropping the cylinder pin, or a loaded cylinder, while loading/unloading – especially at a public range, during a cease-fire, while everybody else on the line is waiting for YOU to unload and show clear…massive time-saver during a Basic Pistol or CCW class too, especially for novice shooters who thought the gun looked “cute” and bought it without considering its “challenging” handling qualities under stress or time pressure.
I am already considering buying one to let beginning shooters evaluate, as well as for possible use as a personal hideout gun.
It looks like the way the break action is actuated might make it impossible to use that laser sight on it. I don’t think I would have gotten that laser anyway, but that’s a bit of a bummer.
Sadly, the lack of an exposed cylinder pin means no bayonet attachment, either
Definitely going to be my new super concealed carry weapon. Tired of this P-32.
Hrm.
I bought a .22 NAA mini for my sister for her CCW because it had the half detents on the cylinder and the folding grip over the trigger.
My only complaint was the effort it took to pull the cylinder out and reload with the tiny pins and all. But safety and reliability > effort.
I wonder if they’ll let me trade up to this one. :p
ME WANT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
dammit NAA, I was perfectly happy with my “remove cylinder to load” .22 mag mini until I saw this.
That’s awesome! I really want one.
Opps…. More pics and specific details here:
http://gunmart.blogspot.com/2010/09/naa-mini-top-break-coming-in-september.html
They are slated for September??? And they say price will be less then $500.
More pics and specific details here:
I think it will make them more viable as a fun plinker…. This shoudl drive sales for a already popular little gun. Price is steep however.
Finally, a affordable break top revolver.
Better than a small broken bottle.
I’ll buy that.