Comments on: New Bullpup SKS Stock from SG Works http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/ Firearms not Politics Fri, 10 Feb 2012 22:19:07 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Jaydin Loftus http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-86269 Jaydin Loftus Tue, 07 Feb 2012 13:39:40 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-86269 Thanks-a-mundo for the blog post. Great. Thanks-a-mundo for the blog post. Great.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: michael http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-45912 michael Sat, 30 Oct 2010 05:05:35 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-45912 I'm almost done. found it easier squeezing upper and lower together with my big wood vise, screws lined up perfectly. Also, discovered my trigger group was dammaged, I'll get another from sksman. I've milled two very small laser modules with X,Y set screws. for a built in look. the front metal peice will come in very handy. sksman has ak grips. I'm gonna vise it in and square it. drill for my lasers. and for my leds. should be strait and sturdy. would hold my switches. Gonna clean my old sling rings and mount with the same screws. Question, who sells some cheap peep sights that I can put on top that does'nt sit too high? And the guy in sgw's site who painted his sand, Just what kind of paint is not gonna scratch and peel off the kit? Everything I've ever painted and took outdoors scratched and looked horible. Would like to do it in the old army woodland camo. Otherwise, the original black is fine. By the way, Ebay has a 12" gijoe of my unit invading Panama, looks like "Gator"; Manchu hair and the pig. Thanks again SGWORKS, Damn good job but, I have too tweek mine just a very little. Bloggers, give me a holla, We are a whole new group in our very own. I’m almost done. found it easier squeezing upper and lower together with my big wood vise, screws lined up perfectly. Also, discovered my trigger group was dammaged, I’ll get another from sksman. I’ve milled two very small laser modules with X,Y set screws. for a built in look. the front metal peice will come in very handy. sksman has ak grips. I’m gonna vise it in and square it. drill for my lasers. and for my leds. should be strait and sturdy. would hold my switches. Gonna clean my old sling rings and mount with the same screws.
Question, who sells some cheap peep sights that I can put on top that does’nt sit too high? And the guy in sgw’s site who painted his sand, Just what kind of paint is not gonna scratch and peel off the kit? Everything I’ve ever painted and took outdoors scratched and looked horible. Would like to do it in the old army woodland camo. Otherwise, the original black is fine.
By the way, Ebay has a 12″ gijoe of my unit invading Panama, looks like “Gator”; Manchu hair and the pig.
Thanks again SGWORKS, Damn good job but, I have too tweek mine just a very little. Bloggers, give me a holla, We are a whole new group in our very own.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Gary Brown http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-45335 Gary Brown Mon, 25 Oct 2010 00:03:12 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-45335 I ordered my stock well over a year ago when first advertised. I was patient because I understand the problems of small and or new companies. I got my stock at the end of AUG and it would NOT work! I sent it back and 2 weeks later got my replacement. It worked perfectly! I had to use a riser AND tall rings to get a good sight picture thru my scope but I believe this is common to all bullpups. I fabbed a mount for the forward grip and went to the range. After sight in I fired 200 rounds and performance was flawless. My only complaint is mag swapping is difficult at best so I'll have to get more stripper clips. Overall a very impressive looking weapon and well worth the wait. I ordered my stock well over a year ago when first advertised. I was patient because I understand the problems of small and or new companies. I got my stock at the end of AUG and it would NOT work! I sent it back and 2 weeks later got my replacement. It worked perfectly! I had to use a riser AND tall rings to get a good sight picture thru my scope but I believe this is common to all bullpups. I fabbed a mount for the forward grip and went to the range. After sight in I fired 200 rounds and performance was flawless. My only complaint is mag swapping is difficult at best so I’ll have to get more stripper clips. Overall a very impressive looking weapon and well worth the wait.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: michael http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-45118 michael Thu, 21 Oct 2010 16:30:40 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-45118 IT'S CHRISTMAS TIME! Yep, mine came today (Thursday, October 21, 2010); and me is happy. Thanks SGWorks. It's beautiful. IT’S CHRISTMAS TIME! Yep, mine came today (Thursday, October 21, 2010); and me is happy. Thanks SGWorks. It’s beautiful.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: James http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-43372 James Thu, 23 Sep 2010 02:08:12 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-43372 I yes have received my kit. I must say it is much better quality than I expected the polymer/nylon whatever is very sturdy and plenty well supported inside with a honey comb type design plus there is a extra metal support bracket on both sides underneath the trigger housing. I am still removing all of the pieces of stock that leaks out around the mold during manufacturing. The same stuff that you get from models easy to do and not terrible but I plan on painting the stock a desert camo and I am a perfectionist. Oh also to all those still waiting they are currently shipping 1-15 Aug 09 orders I placed my order on 27 Jul 09 so they are good for there word and trust me 100% ligit. The only problem I have is I got the bracket for the tri-rail but they forgot to put in the tri-rails themselves. I am very happy so far and they seem very prompt to resolve any problems that occur. BE PATIENT IT WILL COME AND TRUST ME U WILL GET ALL UR ORDERS FILLED I yes have received my kit. I must say it is much better quality than I expected the polymer/nylon whatever is very sturdy and plenty well supported inside with a honey comb type design plus there is a extra metal support bracket on both sides underneath the trigger housing. I am still removing all of the pieces of stock that leaks out around the mold during manufacturing. The same stuff that you get from models easy to do and not terrible but I plan on painting the stock a desert camo and I am a perfectionist. Oh also to all those still waiting they are currently shipping 1-15 Aug 09 orders I placed my order on 27 Jul 09 so they are good for there word and trust me 100% ligit. The only problem I have is I got the bracket for the tri-rail but they forgot to put in the tri-rails themselves. I am very happy so far and they seem very prompt to resolve any problems that occur.

BE PATIENT IT WILL COME AND TRUST ME U WILL GET ALL UR ORDERS FILLED

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: James http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-43351 James Wed, 22 Sep 2010 22:23:34 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-43351 I ordered mine in February. Ive been checking the site every day looking for the 1/2 month shipping update. Im excited too but ill be happier when they finally ship February. I ordered mine in February. Ive been checking the site every day looking for the 1/2 month shipping update. Im excited too but ill be happier when they finally ship February.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: michael http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-43305 michael Wed, 22 Sep 2010 12:41:57 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-43305 It is 22 Sept 2010. Has anyone whom reads this blog gotten their kit yet? Do you have it yet? I've watched the assembly video so many times; I'm starting to like the girl. Why does it take so long for them to ship? It is 22 Sept 2010. Has anyone whom reads this blog gotten their kit yet? Do you have it yet? I’ve watched the assembly video so many times; I’m starting to like the girl. Why does it take so long for them to ship?

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: monitor http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-41972 monitor Fri, 03 Sep 2010 03:18:14 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-41972 I've been following this for several years. Looks like the SKS bullpup man strikes again. The first man had more photos and a better website than this guy. Hell, I got took too. We are now investigating his involvement with Madame Abacha in the Congo. Also thier many other names and accounts. There is an multimational internet party that solicits many different forms of money scams and, they have mastered the "Paypal", database too. They focus on creating the Preordering websites, mirroring those websites, and can also dupplicate the SSL security to show on your monitor. If you are using any "Microsoft, Windows (XP, Vista, or Windows7), now matter how Much you pay for security. "They'll get paid, as long as you pay". So watch all your banking, credit, medical accounts. Window operating systems will allway have a back door; and anyone who is smart enough to get in will. Back to SGWORKS. I’ve been following this for several years. Looks like the SKS bullpup man strikes again. The first man had more photos and a better website than this guy. Hell, I got took too. We are now investigating his involvement with Madame Abacha in the Congo. Also thier many other names and accounts.

There is an multimational internet party that solicits many different forms of money scams and, they have mastered the “Paypal”, database too.
They focus on creating the Preordering websites, mirroring those websites, and can also dupplicate the SSL security to show on your monitor.

If you are using any “Microsoft, Windows (XP, Vista, or Windows7), now matter how Much you pay for security. “They’ll get paid, as long as you pay”. So watch all your banking, credit, medical accounts. Window operating systems will allway have a back door; and anyone who is smart enough to get in will.

Back to SGWORKS.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: mike http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-41920 mike Thu, 02 Sep 2010 01:25:44 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-41920 OK, Now they're shipping. Either they have 437,463 orders or they shipping by chinese immigrant bicycles. Is there someone who is familliar with this site have thier kit yet? Fuck going to the PO in a hyundai, rent a frickin U-haul. There are many shipping services out there that can "git er done". Please SGworks and others, don't be offended by patience running out. I'm ruuning out of time for adventure. Within 5 weeks, I'm gonna have to go back to work and; I will not have vacation time for another three years. Shait, I hope I live that long. I,ve got things to do. Shiat, I'd like to submit some laser, led illuminators to sgworks. I was in the last class of jungle training and I'm familliar with the desert. My testing intergrated lasers and various (nichias, luxeons, osrams, and ebay leds just may go in the trash, if I cannot get in the field with a good platform. What shall I do, Hire a lawyer? I too have very little income. I'm Christian and, I need to do his tasks that I believe he put before me. I've got a very small forward 635nm laser module (XY adjustable) and many leds to include "Osram, Nichia, 850nm lasers and leds, Luxeons". I need to deploy these in the field. As many know, A long rifle gets caught in the brush, and branches like to disarm you. You'd know what I'm talking about if you had 11B10 training. Here's a question. Who or what is in your backyard?You need to protect you kids, parents and I think you love your dogs too. To do that, you need shot placement, target aquisition and to be certain that you hit what you want and nothing else. Now, Am I a fool? Not today I ain't. Not tomorow either. SGWORKS, SHIP MY STOCK KIT ASAP... Or do I need a lawyer? POST DIS! MRC>> OK,
Now they’re shipping. Either they have 437,463 orders or they shipping by chinese immigrant bicycles. Is there someone who is familliar with this site have thier kit yet? Fuck going to the PO in a hyundai, rent a frickin U-haul. There are many shipping services out there that can “git er done”. Please SGworks and others, don’t be offended by patience running out. I’m ruuning out of time for adventure. Within 5 weeks, I’m gonna have to go back to work and; I will not have vacation time for another three years. Shait, I hope I live that long.

I,ve got things to do. Shiat, I’d like to submit some laser, led illuminators to sgworks. I was in the last class of jungle training and I’m familliar with the desert. My testing intergrated lasers and various (nichias, luxeons, osrams, and ebay leds just may go in the trash, if I cannot get in the field with a good platform.

What shall I do, Hire a lawyer? I too have very little income. I’m Christian and, I need to do his tasks that I believe he put before me.

I’ve got a very small forward 635nm laser module (XY adjustable) and many leds to include “Osram, Nichia, 850nm lasers and leds, Luxeons”.
I need to deploy these in the field.

As many know, A long rifle gets caught in the brush, and branches like to disarm you. You’d know what I’m talking about if you had 11B10 training. Here’s a question. Who or what is in your backyard?You need to protect you kids, parents and I think you love your dogs too.

To do that, you need shot placement, target aquisition and to be certain that you hit what you want and nothing else.

Now, Am I a fool? Not today I ain’t. Not tomorow either.

SGWORKS, SHIP MY STOCK KIT ASAP… Or do I need a lawyer?

POST DIS!

MRC>>

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Nick http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-40094 Nick Fri, 06 Aug 2010 18:43:44 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-40094 Matt, the gun shop that I work at buys used guns and we have an original German Mauser 98k that was dropped into a modified Remington 700 stock and chambered to a .30-06. It's a damn shame.... Matt, the gun shop that I work at buys used guns and we have an original German Mauser 98k that was dropped into a modified Remington 700 stock and chambered to a .30-06. It’s a damn shame….

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Annoyed http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-39549 Annoyed Thu, 29 Jul 2010 18:28:54 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-39549 I have heard this line befoe, I will believe it when I see it all packaged up on my doorstep I have heard this line befoe, I will believe it when I see it all packaged up on my doorstep

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Zev Eliezer http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-39478 Zev Eliezer Tue, 27 Jul 2010 14:41:05 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-39478 From SGWorks website: "Friday, July 23rd, 2010 We will begin our shipping process within two weeks from today, July 23, 2010!!! We were able to confirm this morning that the metal reinforcements would be finished in time to begin shipping August 8, 2010. We will start shipping sooner if we receive them earlier. The price for our SKS Bullpup Kit will be going to the retail price August 8. The Front Tri-rail Mount Option/Accessory will be $24 and the Extended Magazine Release Lever Accessory for detachable magazines will be $18 and will not be included with the stock kits after August 7, but will be offered separately. We will be posting an assembly video and close-up pictures the first of this next week." From SGWorks website:

“Friday, July 23rd, 2010
We will begin our shipping process within two weeks from today, July 23, 2010!!! We were able to confirm this morning that the metal reinforcements would be finished in time to begin shipping August 8, 2010. We will start shipping sooner if we receive them earlier. The price for our SKS Bullpup Kit will be going to the retail price August 8. The Front Tri-rail Mount Option/Accessory will be $24 and the Extended Magazine Release Lever Accessory for detachable magazines will be $18 and will not be included with the stock kits after August 7, but will be offered separately.

We will be posting an assembly video and close-up pictures the first of this next week.”

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Matthew http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-39274 Matthew Fri, 23 Jul 2010 22:03:30 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-39274 Have these shipped yet? I am looking for a Bullpup stock for my Chi Para. If I had realized they sold them before I purchased the T6 Fusion I would bought this instead. Have these shipped yet? I am looking for a Bullpup stock for my Chi Para. If I had realized they sold them before I purchased the T6 Fusion I would bought this instead.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Annoyed http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-38927 Annoyed Tue, 20 Jul 2010 18:40:11 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-38927 I have been waiting about 1 year for this dumb thing to ship. I understand that there are production delays but I am starting to think this is just some type of scam. I guess I will believe it when I see it. And after a year this better not suck! I have been waiting about 1 year for this dumb thing to ship. I understand that there are production delays but I am starting to think this is just some type of scam. I guess I will believe it when I see it. And after a year this better not suck!

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: James http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-38535 James Thu, 15 Jul 2010 06:47:56 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-38535 Wow. Now Big Red I dont like to berate people online, its too impersonal. But did you even google SG works? It is the first hit on there. anyway the website is sgworks.com. And huzza! If everything goes smoothly shipping should start soon after the 16th! Ive been waiting sence feb (thats my post up there) But I cant imagine the people whove been waiting a whole year for this thing. thats crazy. Wow. Now Big Red I dont like to berate people online, its too impersonal. But did you even google SG works? It is the first hit on there.
anyway the website is sgworks.com.
And huzza! If everything goes smoothly shipping should start soon after the 16th! Ive been waiting sence feb (thats my post up there) But I cant imagine the people whove been waiting a whole year for this thing. thats crazy.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Big Red http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-38113 Big Red Sun, 11 Jul 2010 17:48:26 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-38113 Wow, i want to buy one right now. Only problem is where the heck do i find one? Wow, i want to buy one right now. Only problem is where the heck do i find one?

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: michael http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-31473 michael Fri, 23 Apr 2010 21:29:20 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-31473 (Preliminary Update) #2 Now his molder/manufatacturer has thier head up thier *%#, and there's another holdup on getting us our kits. Seems like the employees don't want to do the work or, they don't want their jobs. No hard fellings to SGWORKS, but they've been picking some of the worst I've run across. My personal experience with folks of this kind and had good things to say about is (Emachineshop.com). They getter'done. I wonder if I'll ever get to take my new sks out to the feild. (Preliminary Update) #2

Now his molder/manufatacturer has thier head up thier *%#, and there’s another holdup on getting us our kits. Seems like the employees don’t want to do the work or, they don’t want their jobs. No hard fellings to SGWORKS, but they’ve been picking some of the worst I’ve run across.

My personal experience with folks of this kind and had good things to say about is (Emachineshop.com). They getter’done. I wonder if I’ll ever get to take my new sks out to the feild.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: michael http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-30935 michael Sat, 17 Apr 2010 19:56:16 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-30935 I'd like to see the close-ups of the production model. That's with the tri rail. I want to make my own forward handgrip, possibly a cheap AK grip. Could someone tell me that the cheap black AK grips are hollow inside? I want to put it in a vise and drill 5mm holes in the front perpendicular to the barrell. I have some very bright 5mm leds to light my way. I have three AA battery boxes (68mm x35mm) that I could submount with black resin and they'll look like they were made that way. Or, if the trigger gaurd is large enough, I could dremmel around the screw mounts to put my smallest wire in. Put the hand/grip assembly in vise, line up my square and drill,5mm bit. Any advice would be appreciated! I’d like to see the close-ups of the production model. That’s with the tri rail. I want to make my own forward handgrip, possibly a cheap AK grip. Could someone tell me that the cheap black AK grips are hollow inside? I want to put it in a vise and drill 5mm holes in the front perpendicular to the barrell. I have some very bright 5mm leds to light my way. I have three AA battery boxes (68mm x35mm) that I could submount with black resin and they’ll look like they were made that way. Or, if the trigger gaurd is large enough, I could dremmel around the screw mounts to put my smallest wire in. Put the hand/grip assembly in vise, line up my square and drill,5mm bit.
Any advice would be appreciated!

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: aj http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-29595 aj Mon, 29 Mar 2010 03:54:13 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-29595 I just got back from the Crossroads gun show @ Costa Mesa (Calif.) and preordered one. Note: I'm not a forum regular here, but found this page googling last night, after a friend saw this stock and emailed me the infos on it. Polymer stocks are nice on SKSs and lighten them up a bit, but the balance gets FUBAR as a result. This brings things back in line very nicely (he had his prototype available for liberal handling, and a stock SKS for size/weight comparison). To answer a question above, yes, it can use TAPCO removable magazines. Being in CA I am relegated to fixed 10 round, and this works fine with stripper clips. As mentioned, the design has changed a little on the top with regards to rail mounts as pictured here. One mod that does need to made, and they do reference this on their web page, is removal of the rear site. Taps out easy enough. That said, can anyone recommend a good US-made gas tube and piston? I picked up an old Chinese SKS from a buddy and it hasn't been fired in... probably 14 years or so. The gas tube's a bit on the corroded side, so I'd rather replace than refurbish. Thanks in advance! I just got back from the Crossroads gun show @ Costa Mesa (Calif.) and preordered one. Note: I’m not a forum regular here, but found this page googling last night, after a friend saw this stock and emailed me the infos on it.

Polymer stocks are nice on SKSs and lighten them up a bit, but the balance gets FUBAR as a result. This brings things back in line very nicely (he had his prototype available for liberal handling, and a stock SKS for size/weight comparison).

To answer a question above, yes, it can use TAPCO removable magazines. Being in CA I am relegated to fixed 10 round, and this works fine with stripper clips. As mentioned, the design has changed a little on the top with regards to rail mounts as pictured here.

One mod that does need to made, and they do reference this on their web page, is removal of the rear site. Taps out easy enough.

That said, can anyone recommend a good US-made gas tube and piston? I picked up an old Chinese SKS from a buddy and it hasn’t been fired in… probably 14 years or so. The gas tube’s a bit on the corroded side, so I’d rather replace than refurbish.

Thanks in advance!

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Tex http://www.thefirearmblog.com/blog/2009/07/15/new-bullpup-sks-stock-from-sg-works/comment-page-1/#comment-28998 Tex Sat, 20 Mar 2010 01:32:21 +0000 http://www.thefirearmblog.com/blog/?p=7087#comment-28998 Do you have to use stripper clips, or will it accept Tapco 20 round mags? I really like this concept. Do you have to use stripper clips, or will it accept Tapco 20 round mags? I really like this concept.

Please rate this comment: Thumb up 0 Thumb down 0
]]>