Comments on: S&W 625 fully suppressed revolver http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/ Firearms not Politics Fri, 10 Feb 2012 22:19:07 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: J of J http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-21549 J of J Mon, 14 Dec 2009 19:39:27 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-21549 i like the kac vertion beater i like the kac vertion beater

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: komrad http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-13940 komrad Wed, 02 Sep 2009 21:52:53 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-13940 I'd take a DeLisle .45 acp carbine over that thing. It was so quiet that working the bolt was loader than the gun firing. I’d take a DeLisle .45 acp carbine over that thing. It was so quiet that working the bolt was loader than the gun firing.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: SplitHoof http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-12045 SplitHoof Wed, 15 Jul 2009 02:03:08 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-12045 Another solution to a problem that dosen't exist. You could supress an Uzi pistol in the same caliber for a lot le$$, in a smaller package. However, the European's are known for over-engineering everything. Another solution to a problem that dosen’t exist. You could supress an Uzi pistol in the same caliber for a lot le$$, in a smaller package. However, the European’s are known for over-engineering everything.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: dylan bruns http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7519 dylan bruns Tue, 17 Mar 2009 16:04:56 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7519 that's awesome that’s awesome

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Cybrludite http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7337 Cybrludite Thu, 12 Mar 2009 10:50:05 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7337 That's German engineering for you. I hear that a German anvil has 30 moving parts, and has to be wound every ten minutes of use. That’s German engineering for you. I hear that a German anvil has 30 moving parts, and has to be wound every ten minutes of use.

Please rate this comment: Thumb up 1 Thumb down 0
]]> By: Starik Igolkin http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7111 Starik Igolkin Thu, 05 Mar 2009 16:42:57 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7111 Very cool, but from practical side it looks over-engineered, to be honest. Wouldn't Nagant M1895 with a silencer do the same thing simpler and cheaper? Very cool, but from practical side it looks over-engineered, to be honest. Wouldn’t Nagant M1895 with a silencer do the same thing simpler and cheaper?

Please rate this comment: Thumb up 1 Thumb down 1
]]> By: Nick http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7073 Nick Wed, 04 Mar 2009 08:44:28 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7073 I assumed we were talking about something like a Rem. 700, but I guess that counts too. Forgot about it. I assumed we were talking about something like a Rem. 700, but I guess that counts too. Forgot about it.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Steve http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7070 Steve Wed, 04 Mar 2009 07:10:29 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7070 James have a blogged out a silenced 9mm bolt action pistol used during WWII: http://www.hellinahandbasket.net/2009/03/a_silenced_revolver.htm James have a blogged out a silenced 9mm bolt action pistol used during WWII:

http://www.hellinahandbasket.net/2009/03/a_silenced_revolver.htm

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Nick http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7069 Nick Wed, 04 Mar 2009 06:53:04 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7069 "but I can’t see an advantage over a simple bolt-action with a threaded can." Are you serious? Obvious advantage: Size. A bolt gun isn't a huge lot of good inside a building, or in a position where you're only a few meters away from your target. “but I can’t see an advantage over a simple bolt-action with a threaded can.”

Are you serious? Obvious advantage: Size. A bolt gun isn’t a huge lot of good inside a building, or in a position where you’re only a few meters away from your target.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Steve http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7062 Steve Wed, 04 Mar 2009 03:39:39 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7062 EmptorMaven, over a bolt action I would say it is probably shorter in length, you can fire faster (just pull the trigger, no bolt cycling). After more than a couple of shots I imagine your target(s) probably know you are about and best pull out a high capacity sub gun/pistol/rifle. EmptorMaven, over a bolt action I would say it is probably shorter in length, you can fire faster (just pull the trigger, no bolt cycling). After more than a couple of shots I imagine your target(s) probably know you are about and best pull out a high capacity sub gun/pistol/rifle.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: EmptorMaven http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7061 EmptorMaven Wed, 04 Mar 2009 03:36:40 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7061 Gees, I guess it goes to show you can engineer your way around anything, but I can't see an advantage over a simple bolt-action with a threaded can. I mean you have to pop open two cylinder seals to reload, and all so you can get six consecutive shots of a double-action revolver trigger? Gees, I guess it goes to show you can engineer your way around anything, but I can’t see an advantage over a simple bolt-action with a threaded can. I mean you have to pop open two cylinder seals to reload, and all so you can get six consecutive shots of a double-action revolver trigger?

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Valhalla http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7051 Valhalla Tue, 03 Mar 2009 20:09:56 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7051 What beauty... its elegant cylinder, its sublime scope thingamajigit... For all the assassins, no jamming, no sound, and coming soon, no bullets. What beauty… its elegant cylinder, its sublime scope thingamajigit…

For all the assassins, no jamming, no sound, and coming soon, no bullets.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: guy http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7049 guy Tue, 03 Mar 2009 18:51:36 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7049 Those disk shaped devices on the front of the cylinder interest me. Do those mate with the big cover to provide a better seal, or are they just a bearing surface to help the cylinder rotate smoothly against the tight fitting shell? Those disk shaped devices on the front of the cylinder interest me.

Do those mate with the big cover to provide a better seal, or are they just a bearing surface to help the cylinder rotate smoothly against the tight fitting shell?

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Leisureguy http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7048 Leisureguy Tue, 03 Mar 2009 18:12:41 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7048 Interesting. I had always assumed that a suppressor on a revolver was a mug's game. Not so, it seems. Interesting. I had always assumed that a suppressor on a revolver was a mug’s game. Not so, it seems.

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Alre http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7045 Alre Tue, 03 Mar 2009 17:02:57 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7045 Horrible! Horrible!

Please rate this comment: Thumb up 0 Thumb down 1
]]> By: kvalseth http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7043 kvalseth Tue, 03 Mar 2009 15:31:26 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7043 Or you could just do this: http://www.youtube.com/watch?v=vvF4yurWSc0 Or you could just do this: http://www.youtube.com/watch?v=vvF4yurWSc0

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: James R. Rummel http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7042 James R. Rummel Tue, 03 Mar 2009 15:06:38 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7042 Good post. James Good post.

James

Please rate this comment: Thumb up 0 Thumb down 0
]]> By: Daniel E. Watters http://www.thefirearmblog.com/blog/2009/03/03/sw-625-fully-suppressed-revolver/comment-page-1/#comment-7041 Daniel E. Watters Tue, 03 Mar 2009 14:09:03 +0000 http://www.thefirearmblog.com/blog/?p=5467#comment-7041 You need to look up the suppressed Ruger GP100 and Super Redhawk that KAC developed. The telescoped ammunition they used was a pretty clever method to seal the cylinder gap. You need to look up the suppressed Ruger GP100 and Super Redhawk that KAC developed. The telescoped ammunition they used was a pretty clever method to seal the cylinder gap.

Please rate this comment: Thumb up 0 Thumb down 0
]]>