Comments on: The Deresonator http://www.thefirearmblog.com/blog/2008/05/08/the-deresonator/ Firearms not Politics Sat, 21 Nov 2009 08:18:29 +1300 http://wordpress.org/?v=2.8.5 hourly 1 By: Matte B http://www.thefirearmblog.com/blog/2008/05/08/the-deresonator/#comment-9207 Matte B Tue, 05 May 2009 09:48:56 +0000 http://www.thefirearmblog.com/blog/?p=2148#comment-9207 Yes, they work. I have used one on a 7400 and it has much improved, esp after "floating" the barrel (pillar bed under the gas block and filed down the forestock) I had to put mine way toward the back next to the stock. I recommend you remove the front sites and strip the oil off the barrel. Mount the thing using a dulled old flat screwdriver or something similiar in shape. Use rubbing alcohol like you would to put on bicycle grips on handlebars. If you get it too oily it may move, but mine fit very tight. Then you can oil your barrel and replace the sites. You can move it as needed by just wiping the barrel dry and dust free and sliding the thing by hand (add some alcohol under it and twist while pushing/pulling). It will stay put. Yes, they work. I have used one on a 7400 and it has much improved, esp after “floating” the barrel (pillar bed under the gas block and filed down the forestock) I had to put mine way toward the back next to the stock.

I recommend you remove the front sites and strip the oil off the barrel. Mount the thing using a dulled old flat screwdriver or something similiar in shape. Use rubbing alcohol like you would to put on bicycle grips on handlebars. If you get it too oily it may move, but mine fit very tight. Then you can oil your barrel and replace the sites. You can move it as needed by just wiping the barrel dry and dust free and sliding the thing by hand (add some alcohol under it and twist while pushing/pulling). It will stay put.

]]> By: akef38 http://www.thefirearmblog.com/blog/2008/05/08/the-deresonator/#comment-2178 akef38 Mon, 02 Jun 2008 13:42:38 +0000 http://www.thefirearmblog.com/blog/?p=2148#comment-2178 Hey guys, talking about de- resonators they do actually work !!! . The only problem with this pic is that its fitted wrong !!!!. The de-resonator should be 2" before the end of the barrel or 2" before the end of the stock.Once it is adapted to the rifle, you can move it around with a small movement at a time until you find the correct balance for your rifle. you will be surprised :-} Hey guys, talking about de- resonators they do actually work !!! . The only problem with this pic is that its fitted wrong !!!!. The de-resonator should be 2″ before the end of the barrel or 2″ before the end of the stock.Once it is adapted to the rifle, you can move it around with a small movement at a time until you find the correct balance for your rifle.
you will be surprised :-}

]]> By: Steve http://www.thefirearmblog.com/blog/2008/05/08/the-deresonator/#comment-2089 Steve Mon, 12 May 2008 05:45:51 +0000 http://www.thefirearmblog.com/blog/?p=2148#comment-2089 Hi Kurt, thanks for your thoughts. I am a big fan of the limbsaver recoil pads! Hi Kurt, thanks for your thoughts. I am a big fan of the limbsaver recoil pads!

]]> By: Kurt http://www.thefirearmblog.com/blog/2008/05/08/the-deresonator/#comment-2088 Kurt Mon, 12 May 2008 05:02:44 +0000 http://www.thefirearmblog.com/blog/?p=2148#comment-2088 MadOgre did a review of this a while back, and found that it really works very well (it's probably a little too close to the muzzle in your photo, but it depends on the rifle - experimentation is required). If improved accuracy is important (say, if you're a varmint hunter), and you want to improve a not-so-accurate bolt-action rifle without spending much money, it would seem like a good option. LimbSaver makes a lot of outstanding, imaginative products based on their vibration-reduction material (recoil pads, quiet hunting bows, etc.). Definitely not a joke! MadOgre did a review of this a while back, and found that it really works very well (it’s probably a little too close to the muzzle in your photo, but it depends on the rifle – experimentation is required). If improved accuracy is important (say, if you’re a varmint hunter), and you want to improve a not-so-accurate bolt-action rifle without spending much money, it would seem like a good option. LimbSaver makes a lot of outstanding, imaginative products based on their vibration-reduction material (recoil pads, quiet hunting bows, etc.). Definitely not a joke!

]]>